Virtual prototype technology is a new method of product development and is also a numerical design method based on computer product modeling.
虚拟样机技术是一种崭新的产品开发方法，是一种基于产品计算机建模的数值设计方法。
A numerical method of curriculum design, on the dichotomy of the algorithm, the reference value.
一个数值方法的课程设计，关于二分法的算法，值的参考。
A numerical example is given to demonstrate the design procedure of the decentralized feedback robust controllers, in the light of the method developed in this paper.
根据本文提出的方法，给出了一个数值例子以说明分散反馈鲁棒控制器的设计过程。
This paper introduces the present method of numerical analysis and design model for structure calculation in underground construction. Then, these calculative methods were evaluated.
本文介绍了目前地下工程结构设计采用的计算模型及相关的数值分析方法，并对各计算方法进行了评价。
The study provides effective numerical analysis method and theoretical basis for the design and optimization of automobile semi axle cross wedge rolling.
研究结果为优化和设计汽车半轴楔横轧设备提供了有效的数值分析方法和理论依据。
A numerical example shows that the structural analysis and optimization design model and method in this paper are valid and feasible.
算例表明：文中提出的随机结构分析和优化模型与设计方法是合理、可行和有效的。
Three-dimensional numerical simulation method is used in the design of a diesel engines helical intake port for the practical product.
以实际产品为研究对象，将三维数值模拟方法应用于柴油机螺旋进气道的改进设计中。
Numerical examples show that the negative semi-definite matrix condition of exponential stability and the controller design method are feasible.
数值算例说明指数稳定的半负定矩阵条件和控制器设计方法是可行的。
The numerical simulation method would provide theoretical basis for optimum design for the pressure cooling system of apple in practical projects.
这种数值计算方法为实际工程苹果差压预冷系统的优化设计提供了理论依据。
Based on the computational fluid dynamics, a design method for flow meter is given through numerical simulation and experiment on metal tube rotameter with special structure fixed on the level piping.
通过对适合安装于水平管道的特殊结构的金属管浮子流量计三维湍流流场的数值仿真及实验研究提出一种基于计算流体力学的流量传感器设计方法。
Aimed at the deficiencies of traditional design method for valve train CAM, a new method for designing CAM profile with analysis functions and numerical synthesis is proposed.
重点针对配气凸轮传统设计方法的缺陷，提出一种用解析函数法与数值法相结合设计凸轮型线的新方法。
In this dissertation, Numerical Aerodynamic Optimization method is attempted to apply in the inlet design.
本文尝试采用气动优化设计方法进行进气道的设计。
A method of design for the turbine alternator with side intake ducts based on numerical calculation of three-dimensional flow-filed was built.
提出并研究了基于三维流场数值计算的引信用侧进气涡轮发电机的设计方法。
This paper strives to provide an important numerical simulation method for the practical engineering implementation by means of modern fire resistant design based on calculation.
力求通过基于计算的现代耐火设计，为实际工程实施提供重要的数值模拟方法。
The numerical method represents a coupling between the optimum method of advance and retreat and the finite element analysis for the design on large hoist drums of cranes that is an actual structure.
采用空间薄壁板壳元与空间梁元混合离散模型对大吨位起重机钢丝绳缠绕卷筒进行有限元分析，将有限元方法与进退法优化方法耦合形成数值算法进而对卷筒进行优化设计。
The external field of the truck was simulated by the CFD method. The result of numerical simulation provides an instruction for the truck design and research.
采用CFD方法对集装箱货车外流场进行研究，数值计算结果对于货车的设计与开发具有一定的指导意义。
Numerical results illustrate the method is an efficient computer aided optimal design method.
数值结果表明该方法是带筋支撑板有效的计算机辅助优化设计方法。
Numerical analysis method is fast and strong adaptability, facilitate the design scheme.
数值分析方法速度快、适应性强，便于设计方案的比较。
This method provides a theoretical basis and a means of numerical simulation for further improving the design of turbine stages.
为进一步改进透平级的设计，提供了理论依据和数值模拟的手段。
The performance analysis and structural design of foil hydrodynamic thrust bearing has been studied on the basis of the numerical method and procedures.
根据提出的数值计算方法和程序，重点研究了轴向箔片气动轴承的性能分析和结构设计。
Numerical simulations are employed to validate the design method.
并利用数值算例验证了该设计方法的有效性。
The results show that the cylinder head operates reliably and the measured temperatures well agree with numerical results, which prove the effectiveness of the cylinder head design method presented.
试验证明，该气缸盖工作可靠，测量的温度与计算的温度基本吻合，证明了气缸盖设计方法的有效性。
The numerical analysis of finite element method (FEM) is an important means of modern engineering refined design, having become an indispensable engineering tool for designers.
有限元数值分析是现代工程精细设计的重要方法，已成为工程设计人员不可或缺的重要工具和手段。
For truly distinguishing target from noise, a new method for the design of the filters is given by utilizing the numerical synthesis algorithm for restraining noise.
为了准确的识别目标，提出一种基于数字综合算法的干扰抑制滤波器方法。
Numerical examples show that this proposed method is practicable in engineering the optimization design of the thin wall structure.
实例计算表明这种方法在薄壁结构优化设计应用中具有实用价值。
The mathematical model of the bending process, the track design of bending manipulator and the calculate method are also studied to made the bending wood can be machined by numerical control.
并对弯曲过程的数学模型、弯曲机械手的轨迹设计及实际进给量的计算方法等理论进行了研究，为弯曲木的加工实现数控化奠定了基础。
So we apply active contour method for engineering applications which are based on level set numerical scheme , and design a program with C.
为适应这些要求，该文采用基于水平截集的活动围道图像分割方法，进行了面向工程化的算法实现和C应用程序设计。
So we apply active contour method for engineering applications which are based on level set numerical scheme , and design a program with C.
为适应这些要求，该文采用基于水平截集的活动围道图像分割方法，进行了面向工程化的算法实现和C应用程序设计。
应用推荐