• To take the advantage of high efficient and fast mathematic calculations of computer, this system realized the optimum design of nonlinear cam-profiles.

    利用计算机高效快速的数学运算,实现非线性三角的优化设计,并根据实际要求设计生产高效的线性三角。

    youdao

  • On the basis of high precision mathematics models, foe methods of MODM and nonlinear programming are used to obtain the optimum rubber trimmings and develop the software of RTCAD.

    在高精度数学模型基础上,采用多目标规划和非线性规划方法优选出最佳胶料配方。并开发了胶料配方软件RTCAD。

    youdao

  • Taking two-element equalizer as a link model, taking nonlinear least square method as optimum mode, selection problem of initial parameters in multiple node equalizer links is solved.

    以二元件均衡器为链接模型,以非线性最小二乘法为最优化方式,解决了多节均衡器链接中初始参数值的选取问题。

    youdao

  • Combining the nonrestrictive and nonlinear optimizing method with the finite element analysis, the optimum design can be obtained.

    应用非线性无约束的优化技术,结合有限元计算,得到良好的优化设计。

    youdao

  • Simulation results show that the nonlinear excitation controller law has better stability and dynamic performance than the linear optimum excitation controller law.

    仿真表明,与固定点线性最优励磁控制方式相比,非线性励磁控制方式具有更好的稳定性和动态品质。

    youdao

  • The optimum thickness for the insulating layer is to find the optimal solution for a nonlinear objective function.

    保温层厚度的优化是含有多变量非线性目标函数的优化。

    youdao

  • An optimum algorithm is proposed to solve the geometrically nonlinear problem for a simply-supported beam with large deformation.

    提出一种求解几何非线性问题的优化算法,并研究了简支梁的几何非线性大变形问题。

    youdao

  • The phase matching conditions for sum frequency generation are analyzed. The optimum phase matching angles and effective nonlinear coefficients for KTP and LBO are derived and calculated.

    进行了双束激光和频相位匹配的理论分析,给出了KTP和LBO 两种晶体在和频时的最佳相位匹配角和有效和频系数。

    youdao

  • The nonlinear support vector machine multiuser detector can approach the optimum multiuser detector in a better way than the other linear detectors.

    另外,支撑矢量机多用户检测器的非线性特性可以比线性检测器更好地逼近最优检测器。

    youdao

  • Optimum design method that the paper gives makes theoretical reference to engineering application and offer a thinking fashion for optimum design of complicated nonlinear problem.

    本文建议的优化设计方法为实际工程应用提供了参考,同时也为复杂非线性问题的优化设计提供了新的思路。

    youdao

  • An optimum algorithm is proposed to solve the geometrically nonlinear problem of large deformation of a cantilever under pressure on free end.

    提出一种解决几何非线性问题的优化算法,研究了悬臂压杆的几何非线性大变形问题。

    youdao

  • The coordinate rotary method of nonlinear programming is described for solving the optimum section of the non-overflow concrete gravity dams.

    本文阐述了采用非线性规划的坐标轮换法,作为求解混凝土非溢流实体重力坝最优剖面的方法;

    youdao

  • An optimum perturbation method based on small variables is suitable for nonlinear systems.

    最佳摄动法是一种基于小参量的系统辨识方法,特别适用于非线性系统。

    youdao

  • Due to non orthogonality of signature sequence, performance of linear detector is much less than that of the optimum detector that is nonlinear.

    最佳多用户检测器是非线性检测器,特征码不完全正交时,线性检测器很难逼近最佳检测器。

    youdao

  • The tower shape is optimized by nonlinear programming method. An hierarchical algorithm for the tower shape optimum is given.

    应用非线性规划法对铁塔进行形状优化,给出了铁塔在多工况、多约束条件下形状优化的一种分层算法。

    youdao

  • Firstly, the error of fit must be defined for nonlinear least-square fitting of generalized geometry model. Then the nonlinear optimization algorithm can be used to obtain the optimum solution.

    对于一般几何模型的非线性最小均方误差拟合,首先必须定义拟合误差,然后采用非线性最优化方法求解最小误差意义下的最优解。

    youdao

  • Based on the nonlinear static equivalent equations of the cable-cabin system, forces and lengths suitable for servo motor control are obtained by least square method and an optimum strategy.

    基于系统的非线性静平衡方程 ,通过最小二乘运算和优化策略 ,获得了适于伺服电机控制的索系平衡张力和索长。

    youdao

  • Based on the nonlinear static equivalent equations of the cable-cabin system, forces and lengths suitable for servo motor control are obtained by least square method and an optimum strategy.

    基于系统的非线性静平衡方程 ,通过最小二乘运算和优化策略 ,获得了适于伺服电机控制的索系平衡张力和索长。

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定