Install Lotus WebForm server on the server node 2.
在服务器节点2上安装LotusWebForm服务器。
Node 2 sends its integer to node 1, and node 4 sends its integer to node 3.
节点2将自己的整数发送给节点1，节点4将自己的整数发送给节点3。
Before starting the db2 instance on failover node node 2, update the db2nodes.cfg file.
在故障转移节点Node2上启用db2实例之前，更新db 2 nodes . cfg文件。
One time, you may be directed to node 1. Another time, you may be directed to node 2, and so on.
一次可能转发到节点1，而另一次可能转发到节点2，等等。
Similarly, Node 2 has two cluster members named clus2_1 and clus2_2 that are horizontally clustered.
类似地，节点2上的两个集群成员clus2_1与clus2_2也是采用水平集群化。
Now that you have finished the installation on Node1, go back to step 2 and start the installation process, this time for Node 2.
现在你已经完成了节点1上的安装，返回第二步，启动安装过程，这次安装节点2。
If the machine gets to node 2, the interaction at this node repeats itself until it fully meets a preset condition and then goes to the final node, node 5, to implement another interaction flow.
如果机器到了节点2处，那么这个节点处的交互将一直重复自身，直到它完全满足预置条件才转到最后的节点，即节点5处来实现另一个交互流。
Subsequently, at point (2), the user exit is invoked when the message is propagated to the node for processing.
随后在点 (2) 处，在消息传播到该节点进行处理时调用了用户出口。
So I wrote a filter function that, given a node, determines whether it starts an XML island. Listing 2 shows the code.
于是我编写了一个过滤器函数，判断给定的节点是否启动了一个XML岛，清单2显示了该代码。
The steps for deploying the adapter at the node and cluster levels are given above in 2. Node level with module having embedded activation specification.
在节点和集群级别上部署适配器的步骤已在前面的2.在节点级别部署带有嵌入激活规范的模块中给出。
A heading node may, in turn, contain sub heading nodes (level 2) and may also contain some sentences.
一个标题节点，依次，可以包括子标题节点(层次2)，还可以包含有一些句子。
The administrative agent topology is built from an administrative agent node and one or more application server nodes on a single system (Figure 2).
管理代理拓扑由位于单个系统上的一个管理代理节点和一个或多个应用程序服务器节点构成(图2)。
The status element, shown in Listing 2, basically contains nodes that describe the account and has an embedded user node that describes the user.
如清单2 所示，状态元素基本上包含描述帐户的节点，并有一个描述用户的嵌入式用户节点。
In Listing 2, the templates don't need a parameter because the processor manages the current node.
在清单2，模板不需要参数，因为处理程序负责管理当前节点。
If, however, you're in a static method, you have to get the root node and provide the package yourself, as shown in Listing 2.
但是，如果您使用的是静态方法，您就必须得到根节点并自己提供包，如清单2所示。
Listing 2 shows how to obtain the meta data of a content node.
清单2显示了如何获取内容节点的元数据。
PVFS sends a request to the meta-data server (steps 1 and 2 in Figure 4), which informs the requesting node about the location of the file among the various I/O nodes.
PVFS向元数据服务器发送一个请求（图4中的步骤1、2），这会通知请求节点有关文件在各个I/O 节点上的位置的信息。
Throughput scaling from 2 adapters/1 node to 4 adapters/2 nodes was computed for each send message size.
对于每种消息大小，分别计算从2 个适配器/1 个节点到4 个适配器/2 个节点的吞吐量变化。
The package path of these element and attribute classes is dependent on the namespace of the XML node, whose naming is composed by use of the namespace, local name, and node type (see listing 2).
这些元素和属性类的包路径依赖于xml节点的名称空间，其名称由名称空间、本地名称和节点类型组成(见清单2)。
The text of the element is what appears in the tree as the red node, as shown in Figure 2.
这个元素的文字在树中作为红色节点出现，如图2所示。
In Figure 2, the descriptor for the table node and the descriptor for the TBSCAN node are shown to the left of the access path graph.
在图2中，表节点的描述符和TBSCAN节点的描述符显示在访问路径图的左侧。
And in terms of radial nodes, we have 2 minus 1 minus 0, so what we have is one radial node.
对于径向节点，我们有2减去1减去0，所以有一个径向节点。
Listing 2 shows a custom tree node.
清单2显示了一个定制的树节点。
When the pattern is deployed, each of the parts in the pattern results in the creation of a virtual machine containing the WebSphere Application Server node type represented by the part (Figure 2).
当模式完成部署后，模式中的每个部分都会导致创建一个虚拟机，其中包含由该部分表示的WebSphereApplicationServer节点类型(图2)。
This contains a loop in ESQL which builds a request message for each e-mail address and propagates this request message to the plug-in node (see Listing 2).
在ESQL中包含了一个循环，该循环为每个e-mail地址创建一个请求消息并且把该请求信息广播到插件节点（参见清单2）。
where d(n) for a hidden node n, turns on (1) how much n influences any given output node; and (2) how much that output node itself influences the overall error of the net.
其中d(n)是隐藏节点 n 的函数，让我们来看（1）n对任何给出的输出节点有多大影响；（2）输出节点本身对网络整体的误差有多少影响。
A basic script to start a node agent (wasnode) is shown in Listing 2, and the script to start application servers (wasserver) on a node is shown in Listing 3.
清单2中是启动节点代理的一个基本的脚本(wasnode)，清单3是启动某个节点上应用服务器的脚本(wasserver)。
Specifically, we want only credit default swap data, which FpML represents as an XML node that contains multiple child nodes (see Figure 2).
具体来说，我们只想要信用违约掉期数据，FpML 将这些数据表示为一个包含多个子节点的XML节点（参见图 2）。
NodeType is an integer representing the node type — for example, 2 for an attribute node and 7 for a processing instruction.
nodeType是代表节点类型的整数——例如，2代表属性节点，7代表处理指令。
We will use the link frequency count and domain names from Listing 2 as our lineWidth and node names, respectively.
我们将使用清单2中的链接频率计数和域名分别作为lineWidth和节点名。
应用推荐