Ni-based alloy with Y2O3 and composite modifier was used to repair cast defect in blade.
采用自配的添加稀土氧化物Y2O3和复合变质剂的镍基合金粉末对叶片铸造缺陷进行激光熔覆修复。
The effects of pre-aging treatment on segregation behavire of Ni-based single crystal superalloy CMSX-3 were also studied.
结果表明,在固溶与时效处理中间加入预时效处理可有效消除单晶合金组织与成分的不均匀性。
The Ni-based transition alloy had a function of dispersion strengthening, and ahvanced the toughness, reduced the trend of cracking.
镍基过渡合金既起到弥散强化作用,又能提高其韧性,减少裂纹产生。
This paper is about the effect of introducing longitudinal magnetic field on plasma overlaying of Fe-based and Ni-based welding alloy.
本课题就是在铁基和镍基的等离子弧堆焊过程中引入纵向直流磁场,利用磁场的作用提高堆焊层的性能。
A series of Ni-based catalysts with different supports were prepared by impregnation method and tested in the hydroxylation of benzene to phenol.
本文利用浸渍法制备了一系列不同载体的镍基催化剂,并将其用于苯的羟基化反应。
The microhardness, wear resistance and corrosion rate of Ni-based cladding coating by adding Y2O3 improves greater comparing with not adding Y2O3.
与纯镍基熔覆层相比,加入Y2O3的镍基熔覆层显微硬度、耐磨性和耐蚀性均有较大程度提高。
The method was developed for the matrix determination and the component analysis by the character line in Ni-based alloy based on digital simulation.
在镍基合金可见光谱计算机模拟基础上,研究利用镍元素及成分元素特征谱线进行基体鉴别和成分元素分析的方法。
In this paper, high active Ni-based catalysts for methane decomposition were designed and prepared according to the growth mechanism of carbon filaments.
本文根据甲烷裂解过程中碳纤维的生长机理,设计并制备了具有高活性的纳米镍基催化剂。
The relationship between annealing cracks and heating temperatures of Ni-based alloy cold-formed billets and the causes of annealing crack occurrence are studied.
研究了镍基合金冷变形管坯退火裂纹与加热温度的关系和退火裂纹产生的原因。
Based on correlative references, catalytic oxidation and reformation of methane, carbon dioxide, and oxygen to synthesis gas by Ni-based catalysts was studied in this paper.
本论文在参考相关文献的基础上,对甲烷、氧气和二氧化碳催化氧化重整制合成气镍基催化剂进行了研究。
This paper introduces an advanced model of coherent precipitation kinetic as well as the development of computer simulation for the microstructure evolution of Ni-based alloys.
介绍了一种先进的共格沉淀动力学模型,以及运用计算机对镍基合金共格沉淀过程组织演化模拟取得的进展。
Knowledge of the thermal performance of Ni-based honeycomb sandwich panels in a thermal protection structure (TPS) is a prerequisite for the design of metal thermal protection structures(MTPS).
掌握热防护系统(TPS)中热结构超合金蜂窝面板在热环境下的传热隔热特性,是飞行器防热结构设计的先决条件。
Influences of laser ellipticity on the ionization parameters of Ni-like Kr (NLK) system based on electron collisional scheme of optical-field ionization (OFI) were investigated.
研究了激光椭偏率对基于光场感生电离(OFI)电子碰撞机制类镍氪(NLK)系统电离参数的影响。
The modeling and identification of anisotropic damping property of Ni based single crystal alloys are presented.
研究耐高温镍基合金各向异性阻尼特性的建模与识别。
The microstructure and wear resistance of Ni based alloy coating on the high temperature alloy GH33 by laser melt casting have been studied.
研究了高温合金GH33表面激光熔铸镍基合金涂层的组织和耐磨性能。
A method to prepare one dimensional nanoscale composite based on coating of carbon nanotube with Ni by electroless plating is proposed.
利用化学镀方法在纳米级碳管表面化学镀镍,得到新一类一维纳米复合材料。
As the opaque thickness increased, the color of restoration based on Ni-Cr and noble metal increased but the color of restoration based on gold sediment decreased.
随遮色瓷厚度的增加,以镍铬合金与贵金属合金为基底的修复体彩度增加,金沉积为基底的修复体彩度略有下降。
The Ni based coating on 45 steel has been obtained by laser cladding technology.
采用激光熔覆技术在45钢表面获得镍基合金涂层。
Differences in catalytic activity and ability to resist coking between noble metal based catalyst and Ni based catalyst are described.
介绍了贵金属催化剂与镍基催化剂在重整活性和抗积炭能力方面的差异。
The Ni based alloy powder surfacing layer was obtained by light beam surfacing on the 45 steel and the microstructure of heat affected zone(HAZ) and the phase of the surfacing layer were studied.
采用聚焦光束热源在45钢母材上获得了镍基合金粉末堆焊层,研究了堆焊层的物相组成及母材热影响区的微观组织特征。
The effects and mechanisms of phosphorus on Fe Ni based wrought superalloys are reviewed.
综述了磷对铁镍基变形合金的影响及机理。
In this paper, the influence of surfacing technology and material on the quality of light beam Ni based alloy powder surfacing layer was investigated.
研究了堆焊工艺和材料对镍基合金光束粉末堆焊质量的影响规律。
The effect on improving the properties of Ni-base alloy was studied in this paper based on variation in adding amount of rare-earth metals.
本文试验研究了钇基稀土用于改善铸造镍基耐蚀合金性能的效果。
In this paper, the demand of Ni-MH battery charging management is discussed, and thus a management method based on battery voltage, battery temperature, and charging time is put forward.
分析了镍氢电池充电管理系统的设计需求,提出了一种采用电压、温度和时间进行综合控制的充电管理方案。
In this paper, based on leaching process behaviors of platinum-group metals (PGMs) the lately progress in pressure hydrometallurgy of Cu-Ni sulfide ores containing PGMs was presented.
本文以加压湿法冶金处理含铂族铜镍硫化矿过程中铂族金属的行为为主线,介绍了该领域的最新研究进展。
A new kind of boron nitride based shell mold used for investment casting titanium alloys was fabricated and the reaction between it and Ti-Ni alloy was investigated.
研究了一种新型钛合金精密铸造用型壳——氮化硼基复合型壳及其与钛镍合金的界面反应和反应层的形成机制。
Low infrared emissivity materials based on hollow particles are prepared by chemical Ni-coated processing, and surface morphology, absorbance, emissivity and infrared radiant energy are characterized.
利用化学镀镍工艺制备空心微珠基红外低发射率材料,对其表面形貌,并重点对其吸收率、发射率和热辐射能等红外性能进行表征。
Based on Zinc and Zn-Al alloy mechanical plating, a new Zn-Ni alloy mechanical plating process is developed through adjusting type and dosage of activators and promoters.
在机械镀锌、锌铝工艺的基础上,通过调整活化剂和促进剂的种类及用量,研制开发了机械镀锌镍合金工艺。
Effects of the casting technological factors on the size and uniformity of surface grains of turbine blade castings in ni based superalloy were studied by comparison of experimental results.
对比研究了铸造工艺参数对镍基高温合金叶片表面晶粒度和晶粒均匀度的影响。
Our naval engineers and technicians are very satisfied with the ease-of-use and performance of the ni FPGA PXI-based systems.
我们的海军工程师和技术员们对基于NIFPGAPXI系统的性能和易用性非常满意。
应用推荐