NC processing program of earn is obtained through redesign by the CAD / CAM system. Fast design and machining of the earn are realized.
经过CAD／CAM系统的重新设计，可获得凸轮的NC加工程序，实现凸轮的快速设计与加工。
PLC program design, signal processing between NC controller and PLC controller, as well as PLC and machine.
PLC控制程序的设计：包括数字控制器与PLC控制器之间、PLC与机床之间的各种信号处理等。
In this thesis, the thought of optimal design of the machine, the processing route of parts and the program of the NC program are excellently designed.
本文通过机械优化设计理念，对零件孔加工的路线和数控程序的编制进行了优化设计。
Aimed at the interference problem in NC-lathe while the processing, this paper brings forward the solution which utilize program, and it turns out that this solution is correct in theory and practice.
针对在实践中遇到的数控车床加工的干涉问题，提出了用编程来解决的方法，并进行了理论证明，通过反复实践证明也是正确的。
Taking NSR_40 Roots blower as an example, the processing ways, technics and NC program of this twist tri_lobe profile on the lathe machining center is set forth in detail.
以nsr - 40型罗茨鼓风机的三叶扭叶叶轮为例，详细阐述了这种叶轮型面在车削加工中心的加工方法、工艺和数控编程。
The result shows that it is a very important way to improve the ability of NC processing in industry using NC program module of UG.
指出应用好UG提供的强大的数控加工编程功能是提高企业数控加工应用能力的一个重要途径。
The method can improve processing precision and simplify NC program, and shorten processing time by means of examples.
通过实例表明该方法可以提高加工精度、简化数控程序、缩短加工时间。
The paper expounds the method of design about wave spring curved surface, the processing NC program and its technological processing course.
阐述了波形弹簧成形模曲面的确定及其数控加工程序的编制方法、加工工艺过程。
This method is low processing efficiency, low machining accuracy, and the nc program is too large.
这种方法加工效率低下、加工精度低、并且数控程序过大。
As an important part in the nc programming, the function of post-processing is to transfer the cutter location file into the nc program suitable to nc machine tools.
作为数控编程技术的重要内容，后置处理的作用是将通用的刀位文件转换成适合于数控机床加工的NC程序。
As an important part in the nc programming, the function of post-processing is to transfer the cutter location file into the nc program suitable to nc machine tools.
作为数控编程技术的重要内容，后置处理的作用是将通用的刀位文件转换成适合于数控机床加工的NC程序。
应用推荐