You would change it to an appropriate name that exists in your directory (see Figure 5).
您应该将其更改为存在于您目录中的适当名字(参见图5)。
Now specify the name for the new resource adapter that is installed on your server, as Figure 5 shows.
现在为安装在您的服务器上的新的资源适配器指定名称，如图 5 所示。
When you are prompted to log in, if the values are pre-filled, as Figure 6 shows, click OK; otherwise, enter your user name and password, and then click OK.
当您需要注册时，如果值是预填充的，如图6所示，点击OK；否则，输入您的用户名以及密码，然后点击OK。
If that is not possible, try to select some other meaningful name, so that someone looking at your test later has some clue to figure out what you were doing.
如果这样不可行，您可以选择其它一些有意义的名称，这样可以让今后看到您的测试的人能够从这个名称得到一些提示，让他们知道您在做什么。
Name your project and choose which z/OS System (Host Short Name) and High Level Qualifier to associate with the project, as shown in Figure 21.
命名您的项目并选择哪个z/OS系统 （主机缩写名，即 Host ShortName）和高级限定符（High Level Qualifier）与这个项目相关联，如图 21 所示。
Name the configuration something like "pythonInteractive", set the Location to point to your Python interpreter, and pass "-i" as the single argument (see Figure 7).
将该配置命名为诸如 "pythonInteractive"之类，然后设置Location，令其指向您的Python解释器，接着，将 "-i"作为唯一的参数传递进来（请参阅图7）。
Depending on how you named you connections when completing article 1 (or in step 3 above) your connection name may be different. Figure 2 illustrates how the dialog should look when complete.
由于依赖于您在完成文章1时如何命名自己的连接(或者以上的步骤3中)，所以您的连接的名称可能不同。
Finally, select Add server from the node and provide the name of your server (Figure 2).
最后，从该节点选择addserver，同时给出您的服务器的名称(图2)。
Click the name of your page in the left column, and select Edit page Layout (Figure 19).
点击左边栏中您的页面名称，选择EditPageLayout(图19)。
Select the check box next to the name of your portlet in the portlet title column, and then click OK (Figure 27).
在portlettitle列中选择您的portlet名称旁边的复选框，然后单击OK(图27)。
Enter a profile name for your partition and make sure the Use all the resources in the system check box is unchecked, as shown in Figure 5.
为您的分区输入概要名称，并确保未选中usealltheresourcesin thesyste m复选框，如图5所示。
Since your model is called "books," you should name the handler the same (Figure 15).
由于您的模型名为“books”，您应该将处理程序命名为相同的名称(图15)。
Enter the project name ("Felix" for example), select your project directory, and uncheck the "Create Main Class" check box then press the finished button. See Figure 3.
输入项目名称 (比如"Felix")，选择你的项目目录，取消 "CreateMainClass"复选框，并按结束按钮（见下图）。
Go ahead and use the Web application to enter your name and see the response. I received the response shown in Figure 7.
继续并使用Web应用程序输入您的名字并观察响应。
The General tab, as shown in Figure 4, lets you specify the name, description, type, and priority for your activity.
如图4 所示，General选项卡让您指定活动的名称，描述，类型和属性。
The next time you want to run the project, click the arrow next to Run, as shown in Figure 7 and select the configuration with the name of your class containing the main method.
下一次需要运行项目时，单击Run旁边的箭头，如图7 所示并选择带有包???main 方法的类名的配置。
Enter a name (use your name), user ID, and E-mail address (your E-mail address), and then select the appropriate Repository, Permissions and Client Access Licenses for your new user (see Figure 2).
输入name(使用您的名字)，userID，以及您的e -mailaddress(您的e - mail地址)，然后为您的新用户，选择合适的Repository,Permissions和ClientAccessLicenses(如图2所示)。
Select a location for your Web view (name it baseccrc_view1 as shown in Figure 11) and click Next.
为你的Web视图选择一个位置（命名为baseccrc_view1，如图11所示），并点击 Next。
(If you do not see the Customize button (Figure 2) on the layout next to the Name field, then your company has not granted individual users this privilege.)
(如果您没有看到这个布局中紧靠着name域的Customize按钮(图2)，那么您的公司没有授予个人用户这个权力。)
A window pops up, in which you can type the name of any class in your workspace (see Figure 8).
将弹出一个窗口，您可以在其中键入工作空间中的所有类的名称(参见图8)。
Select the queue name that matches your import and the SCA application bus (Figure 33).
选择与导入匹配的队列名称和SCA应用程序总线(图33)。
Let's assume your EditPart is going to use a label as its figure and that the model provides a name, icon, and connections going to and from the label.
让我们假定您的EditPart将使用Label作为它的图形，并且您的模型提供了名称、图标以及与标签之间的连接。
Let's assume your EditPart is going to use a label as its figure, and that the model provides a name, icon, and connections going to and from the label.
让我们假定您的EditPart将使用Label作为它的图形，并且您的模型提供了名称、图标以及与标签之间的连接。
From the Server profile name screen (Figure 5), enter a name for your profile and click Finish.
在ServerProfileName屏幕(图5)上，输入概要文件的名称并单击Finish。
The Edit Local site dialog box shown in figure 7 opens with the name and path information for your update site.
出现如图7所示的EditLocalSite对话框，其中显示了更新站点的名称和路径信息。
The wizard will default the server's host name to localhost, so you'll want to change this to the name of your remote host, as shown in Figure 4.
在默认情况下，这个向导使用localhost作为服务器的主机名，所以需要将它改为自己的远程主机名，见图4。
Specify your naming scheme in the Virtual machine name format field as shown in Figure 8.
在Virtualmachinenameformat字段中指定自己的命名方案，见图8。
The dialog should look similar to Figure 26. Choose use project name as module name unless you have a specific reason to create your own or to use an existing module.
对话框应该与图26相似。选择useprojectnameasmodule name，除非您由于特殊的原因要创建自己的模块，或者要使用现有的模块。
In the New UML model wizard, shown in Figure 4, ensure the destination folder is correctly set, select the Service Design model from the list of templates, and name your model.
在NewUMLModel向导中，如图4所示，确保正确设置了目标文件夹，从模板列表中选择serviceDesign Model，并给模型命名。
In Figure 6, you see the choices we made (our Application name is "CardCatalog"), but feel free to use (and remember) your own values.
在图6中，您将看到我们做出的选择(我们的应用程序名称为“CardCatalog”)，但是您可以随意使用(并记住)自己的值。
应用推荐