Parameter optimization of power system stabilizers is very important to restrain the low-frequency oscillation of multi-machine systems.
电力系统稳定器参数的优化对于抑制多机电力系统低频振荡具有非常重要的意义。
In this design, the referenced machine is cancelled, and the multi-machine disperse control is realized.
在设计中取消了参考机，并实现了多机系统的分散控制。
A decoupling and reducing-order method is brought forward to analyze small signal stability of multi-machine power system.
提出了一种多机电力系统小扰动稳定分析的解耦降阶法。
The algorithm based on model decomposition was proposed for the problem of multi-machine task scheduling with time Windows.
针对多机带时间窗口任务规划问题，提出了基于模型分解的规划求解算法。
An algorithm for predicting the perturbed trajectories in a multi-machine system is proposed based on an additional virtual node.
提出了基于新增虚拟节点的多机系统受扰轨迹预测方法。
The machine installation of automatic feeding system, one can realize multi-machine operations, increase production and save labor costs.
本机床加装全自动送料系统，可实现一人多机操作，提高产量同时节省人力成本。
The machine installation of automatic feeding system, one can realize multi-machine operations, increase production and save labor costs.
本机床加装全自动送料系统，可实现一人多机操作，提高产量同时节省人力成本。
A new method based on evolutionary strategy (es) for optimal design of multi-machine power system stabilizers (PSS) is presented in this paper.
该文提出了一种基于进化策略的多机系统PSS参数优化的新方法。
The paper presents an overview of multi-machine parallel PROLOG system WUMPPS developed on the distributive computer system of Wuhan University.
本文给出了我们在武汉大学分布式计算机系统上开发的多机并行prolog处理系统WUMPPS的概貌。
This paper investigates the feasibility of damping multi-mode oscillations using unified power flow controller (UPFC) in a multi-machine power system.
研究了多机系统中使用统一潮流控制器(UPFC)抑制电力系统多模态振荡的可行性。
Using reducing-order closed-loop transfer function, small signal stability of each machine even the whole multi-machine system is analyzed efficiently.
基于降阶闭环传递函数可对各机组从而对整个多机系统的小扰动稳定性进行有效的分析。
According to the Eigen-analysis on power system, this paper studies the influence of different exciting operation modes on the damping of multi-machine system.
根据电力系统特征分析法，分析了系统励磁运行方式变化对多机系统阻尼的影响。
In order to satisfy the online trajectory prediction of multi-machine system, polymerization technology of trajectories was used to reduce the computing burden.
为了满足实际多机系统在线轨迹预测的要求，引入轨迹聚合技术对多机轨迹进行聚合，进一步减少了计算量。
The robust nonlinear coordinated control is considered to be one of the best ways both in cost and efficacy to enhance and improve the multi-machine system stability.
鲁棒非线性协调控制方法是提高和改善以多机系统为背景的现代电网稳定性最有效、最经济的手段之一。
This paper proposes the application of extended minimum error excitation (MEE) method to designing decentralized output feedback controllers for multi-machine power systems.
本文将最小误差激励(mee)法推广应用于多机电力系统分散输出反馈控制器的设计。
Method 1 and method 2 are applied to the constructed nonlinear model, and then two nonlinear L2 gain disturbance attenuation control laws for multi-machine excitation are deduced.
然后将方法1和方法2分别应用于该模型，得出两种多机系统励磁的非线性L_2增益干扰抑制控制律。
So PSS can be widely used in Multi-Machine power system.
多机系统广泛配置PSS是可行的。
An asynchronous algorithm APM has been proposed for mining association rules on Shared memory multi processor machine.
该文提出了在共享内存多处理机上采掘关联规则的异步算法apm。
Integrating multi automatic winding taping machines and an automatic arranging machine to a production line.
把多台自动绕线包胶一体机和一台自动摆盘机组成一条流水生产线。
The paper puts forward a hybrid magnetic circuit multi couple electric machine that compensates for the uneven air gap magnetic field of the hybrid stepping motor.
提出了一种混合磁路多边耦合电机，对混合式步进电机永磁体产生的气隙磁场沿轴向分布不均匀的问题进行了补偿。
In Asia and Europe, many paperboards are made from the multi-ply paperboard machine.
在亚洲和欧洲，许多纸板是用多层纸板机抄造的。
On the basis of the research on the frame structure of the multi-point Forming machine, its finite element model and mathematical model have been set up.
本文在对三梁四柱式多点成形压力机机架结构研究的基础上，建立了压力机机架有限元模型和机架结构优化的数学模型。
Because PMT's principal axis is connected with machine base in multi-poles parallel structure, the rigidity of PMT and quality of process are improved.
由于该机床的主轴与机座之间为多杆并联连接，大大提高了机床的刚度，加工质量也有了较大改进。
Multi-purpose colloid mill, emulsification isotropic machine, grinder.
多功能胶体磨，乳化均质机，研磨机。
These results are useful for understanding dynamic strength of bench multi-purpose woodworking machine tool and improvement of designing structure.
这些研究对于了解台式木工多用机床的动强度、优化产品结构设计具有一定意义。
This paper introduces design principle of distributed multi-axis tightening machine control system and application in network manufacture and management of automobile industry.
介绍了集散式多轴拧紧机控制系统的设计原理及其在汽车工业网络制造管理中的应用。
The model and conclusion can be applied to the modeling and compensating of errors of multi-axis CNC machine tools.
所提出的模型和结论，可推广应用于多轴数控机床的误差建模与补偿。
The model and conclusion can be applied to the modeling and compensating of errors of multi-axis CNC machine tools.
所提出的模型和结论，可推广应用于多轴数控机床的误差建模与补偿。
应用推荐