Motor shaft is a kind of lifting accessories.
电机轴是起重机的一种配件。
Rotor position sensor tracking linked with the motor shaft.
位置传感器的跟踪转子与电动机转轴相联结。
Plus the motor shaft axis, concentricity absolutely right and reliable.
泵轴为电机加长轴，同心度决对可靠。
Through a rigid sleeve coupling, pump shaft was connected to the motor shaft.
通过一个刚性套筒联轴器，泵轴被连接至电机轴上。
Remove motor shaft end cover. Apply hand winding crank to the squared end of motor shaft.
拆去电机轴尾盖，将盘车手轮放在电机轴尾。
Turn the electric motor shaft if it rotates freely, Measure the air gap between the stator and the rotor.
扳动电动机的转轴是否能自由旋转，测量定子和轴承的空隙。
The contact ratio of the motor shaft taper surface is one of the significant factor for improving the quality of a motor.
电机转轴锥度面表面接触率是电机的一项重要质量指标。
The single-body dual-vane is connected on the motor shaft by screws which pass through a washer and an installation hole.
单体双叶片是由穿过垫圈和安装孔的螺钉连接到电机轴上的。
Electrical synchronization is used in ac drive, often with a balanced motor shaft system to achieve electrical synchronization.
电气同步是在交流传动中，常用带有均衡电动机的电轴系统来实现电气同步。
The experiment show that fiber-optic temperature system can be used to achieve the stable non-touch measurement of motor shaft.
实验结果表明用该传感器可实现对电机转子温度实现非接触稳定测量。
Few are corrupt seal, infiltration of water through the motor shaft inside the motor due to improvement in the motor insulation.
少数是水封败坏、水经过电机轴渗入电机内使电机绝缘性能好转所致。
A motor shaft gap used for a sealing plate for a seal air channel is left between the belt pulley and the end cover of the motor shell.
在皮带轮同电机机壳端盖之间保留供密封风道用的密封板穿过的电机轴空隙位。
Limited weight and dimensions are possible by the monobloc industrial design type with the rotor directly assembled on the motor shaft.
有限的重量和尺寸是可能的单体与直接装配在电机转子轴工业设计类型。
The oil injection hole is a concave channel shape or planar oil injection hole which is arranged on the side surface of the motor shaft.
注油孔为设在电机轴侧面的凹槽形或平面形注油孔。
Seal air is injected into the labyrinth seals located at the main motor shaft (top and bottom) and at the pinion shaft driving the motor.
密封空气被注入到主马达轴（顶部和下部）和驱动马达的齿轮轴的迷宫式密封里。
One blade is static while the other is connected to the motor shaft. Temperature and humidity also affect how the coffee beans will grind.
其中有一个刀片是静止的，其他刀片是连接到电机轴上的，温度和湿度对咖啡豆的研磨也是有一定的影响。
If a suitable shaft is not available, a stub shaft installed through the fan shroud into the motor shaft provides a means of easy mounting.
如果一个合适的轴不可用，短轴通过把电机轴寿衣风扇安装提供了一种手段易于安装。
Because the SL56 occupies only 0.75 inch of the motor shaft length, a brake, pulley, gear box, or coupling can also be placed on the shaft.
由于SL56仅占0.75电机轴的长度，一刹车，滑轮，齿轮箱，或耦合英寸的也可以放在轴上。
Such a relatively low speed rotation of the motor shaft 26 and fan 28 permits the air purifier 10 to operate at a relatively low noise level.
马达轴26和风扇28的这种相对较低速度的旋转使得空气清洁器10在相对较低的噪声等级下运转。
The optimal protection for bearing current was reached by the insulation of both ends of bearing and grounding of carbon brush of motor shaft.
电机双端轴承绝缘并且电机轴碳刷接地，可构成对轴承电流的最佳防护。
The switch magnetic resistance servo motor is driven by the first level deceleration belt transmission and a motor shaft does not bear rigid shock;
开关磁阻伺服电机经一级减速皮带传动，电机轴不承受刚性冲 击；
Two ends of the motor shaft of the motor respectively extend to match and fix with an impeller inducer and a belt pulley through a key slot and a key.
此电机的电机轴两端伸出分别同一风叶和一皮带轮通过键槽和键相 配接固定；
PBPBGDL pump equipped with the company's B5 standard shielded motor shaft, a high degree of general-purpose, repair and maintenance is extremely convenient.
PBPBGDL型泵配备了本公司生产的B5标准轴屏蔽电机，通用程度高，检修维护时极为方便。
Commonly used servo motor is ac servo motor, the motor shaft with in the photoelectric encoder, by detecting the rotor Angle to frequency conversion control.
常用的伺服电机是交流伺服电机，在电机的轴端装有光电编码器，通过检测转子角度用以变频控制。
The suction is provided by a suction unit of the side channel blower type, with direct coupling between the fan and the motor shaft and no transmission system.
吸尘系统是旁路鼓风马达，是由风扇和马达轴直联而成，没有传输装置。
The draught fan is characterized in that the motor shaft fixed with the impeller inducer passes through a plane frame to be fixed with the impeller inducer again.
其特征是同风叶相固定的电机轴穿过平面机座再同风叶相固定；
The micro-structure and the hardness of the submersible electro-motor shaft were analyzed and tested, and the performance of the electro-motor shaft was investigated.
通过潜油电机轴的微观金相组织观察和硬度测试，分析了三种电机轴的组织结构和性能特点。
The analysis of fracture failure for electro-motor shaft was explored with the chemical analysis, macroanalysis, microanalysis and metallographical inspection method.
采用化学分析、宏观分析、微观分析和金相检测手段，对电机轴断裂原因进行了探讨。
There are axial slots matching with the permanent magnets on outer peripheral of the rotator on the main motor shaft. The circulation winding coil is embedded in the slots.
固装在电机主轴上之转子的外周缘上，按轴向开有多道与永磁体相匹配的嵌线槽，在嵌线槽内嵌置有循环绕组线圈。
The swing motor comprises a swing motor shaft core, a left end cover, a stator, a rotor, a vane, a right end cover, an output flange, a sensor and a conical roller bearing;
它包括摆动马达轴芯、左端盖、定子、转子、叶片、右端盖、输出法兰、传感器和圆锥滚子轴承；
应用推荐