The hybrid controller also includes a motor control module controlling the electric motor based on the electric motor torque.
混合动力控制器还包括基于电动机转矩控制电动机的电动机控制模块。
The control of driving motor module and ultrasonic sensor module are realized in the system.
实现了对机器人驱动电机、超声传感等任务模块的系统控制。
Among them the control system of hardware has introduced the peripheral circuit including main chip mainly, the module the signal gathers and the motor driving module.
其中硬件控制系统主要介绍了包括主芯片的外围电路，信号采集模块以及电机驱动模块。
Fan(C&R) Module, Stepper motor, Control panel (device), Sensor, Blower Unit, etc.
冷凝风扇，步进电机，控制面板（器），传感器，鼓风机等。
This article introduces serial communication interface module(SCI)of TMS320F240. It also combines with an example of motor control system to explain practical application of SCI module.
介绍了TMS320F240串行通信接口模块的特点及构成，并结合一个电机控制系统对串行通信接口的实际应用进行了说明。
The compact, in-line design consists of an output section housing the drive train and motor, and a control module section containing the electronics.
结构紧凑，包括一个输出传动系统和电机，以及控制模块部分包含电子产品线的设计。
This paper introduces a simple stepper motor control chip LMD18245. By using it, we can design the drive module of stepper motor by ourselves, and thereby decrease the cost of system design.
该文介绍了一种简单的步进电机控制芯片LMD18245，利用它可以自行设计步进电机的驱动模块，从而为系统设计降低成本。
The control system for the brushless DC motor based-on 80c196mc consists of 80c196mc, IPM, speed displaying and speed setting module.
基于80c 196MC芯片的无刷直流电机控制系统，包括80c 196 MC、IPM、速度显示及速度设定模块。
This robot consists of dynamic system, mechanical system and control system. The control system mainly includes PIC single chip, motor drive circuit and sensor module.
该机器人由动力系统、机械系统和控制系统组成，其控制系统主要由PIC单片机、电机驱动电路和传感器模块三部分组成。
The whole of this robot included dynamic system, mechanical system and control system. This control system mainly included PIC single chip, motor drive circuit, and sensor module.
该机器人由动力系统、机械系统和控制系统组成，其控制系统主要由PIC单片机、电动机驱动电路和传感器模块三部分组成。
An integrating device of variable frequency and speed-down is an important driving and control unit which combines a variable frequency module, a variable frequency motor and a retarder.
变频减速一体机是将变频模块、变频电机和减速机有机集成一体的重要传动控制单元。
The system useTMS320F240 DSP chip which is specialized in motor control system, the chip contains many special module for motor control, and decrease peripheral instruments labor.
系统采用电动机控制专用DSP芯片TMS320F240，该芯片集成了许多电动机运动控制所需的功能模块，减少了外围电路设计工作；
The control system of multi-connected air-condition unit is the control unit which combines a variable frequency module, a variable frequency motor of compressor and a system of refrigeration.
多联空调机组控制系统是将变频模块、变频压缩机和制冷系统有机集成一体的控制单元，其技术核心是变频控制模块。
The motion control of stepping motor in the servo system is investigated and a motion control module based on digital signal processor is designed.
介绍有关步进电机的伺服运动控制，设计了基于数字信号处理器的运动控制系统。
This article presents a design of permanent magnetic brushless DC motor control system and mainly involves the hardware circuit design of speed closed loop and power module drive.
介绍了一种永磁无刷直流电机控制系统的设计方案，主要涉及速度闭环和功率模块驱动的硬件电路设计；并通过实验证明该设计可直接用于小型无刷直流电机的控制。
The hydraulic motor, hydraulic cylinder and oil cup are controlled digitally in the control module.
控制模块对转向器输入端正反转，液压缸的向前、向后加载，内泄油杯放油等数字量控制。
The control model includes PWM output module, PI control module, motor module, current chopping module, mechanical subsystem module and signal processing module of rotor position.
调速模型包括PWM输出模块、PI调节模型、电机本体模型、斩波控制模型、机械子系统模型、电机位置信号处理模型等。
Sensorless DC motor close-loop control module include reversing control, current loop regulating, the positive and negative rotational speed controls with speed ring etc.
无传感器闭环控制模块包括换向调节、电流环调节和速度环调节、正反转速控制等功能。
The software design is finished, including system initialization, clock read and write, tracking Control, motor Drive module and so on.
同时完成了系统的软件设计，主要包括系统初始化，时钟读写，跟踪控制，电机驱动等。
Control signal was sent to Controlling Module. Brushless motor and steering component changed the steering Angle in order to avoid obstacles.
控制执行模块接收到控制信号后，通过触发无刷电机驱动转向机构，改变被控对象的行驶方向，从而实现避障。
Control signal was sent to Controlling Module. Brushless motor and steering component changed the steering Angle in order to avoid obstacles.
控制执行模块接收到控制信号后，通过触发无刷电机驱动转向机构，改变被控对象的行驶方向，从而实现避障。
应用推荐