Seafloor morphology of the sumatran subduction zone: surface rupture during megathrust earthquakes?
苏门答腊俯冲带的海底形态：强地震导致表层断裂？
These stripes are connected together and held in place with rivets, maintaining a smooth flow of forces along the surface through tangential continuity while describing the overall morphology.
这些铝条连接到一起，被铆钉固定就位，通过切向连续性保持沿着表面的平滑力流，同时描述了整体形态。
Different surface morphology can be obtained through adjusting the content of doped salt.
通过调整盐的含量可以得到不同的表面形态。
Life science imaging, for example, often depends on studying surface morphology on lightweight organic materials that are also highly insulating.
例如，生命科学影像往往依赖于研究高度绝缘的轻型有机材料的表面形貌。
To face the body is the creation of space, after determining the morphology and thickness of the surface front unit body, a plurality of unit surface assembled to the uniform space.
以面体来作为创造空间的因素时，在确定单位面体的正面形态及厚度以后，把若干个单位面体组合到统一的空间里。
Methods with chloroform as the solvent, the PLGA fiber scaffolds with different surface morphology were produced altering PLGA solution concentration and the flowing rate.
方法本实验以氯仿为溶剂，调节plga溶液浓度和流量分别制备了具有不同表面形貌的纤维支架。
The surface morphology after preferential corrosion along the vertical orientation was observed via an optical microscope.
用光学显微镜观测和分析电火花线切割硅表面沿纵向分层择优腐蚀后的形貌；
The SEM images of the PNDEA grafted layers prepared by different grafting methods have different surface morphology.
用扫描电子显微镜（SEM）对PNDEA接枝层表征结果表明，用不同接枝手段所制备的接枝膜具有不同的表面形貌。
The results show that there exist great differences in surface morphology, oxidation species and flotation behavior of galena ground with ceramic or iron media.
结果表明，采用瓷介质与铁介质磨矿时，方铅矿表面形态、表面氧化产物及浮选行为存在明显差异。
The surface morphology of the samples was observed by SEM.
在扫描电镜下观察了接枝样品的表面形态。
In argon (ar) gas, nanocrystalline silicon films are prepared by pulsed laser ablation. The influence of ambient pressure on surface morphology of nanocrystalline silicon film is studied.
采用脉冲激光烧蚀技术在氩气环境下制备了纳米硅薄膜，研究了环境气体压强对纳米硅薄膜表面形貌的影响。
These results may be explained by the differences in morphology properties and surface charge densities of the pulps.
不同浆种的纤维形态特征和表面电荷密度的差异可解释上述结果。
Scanning electron microscope (SEM) and X-ray diffraction (XRD) were used to measure the surface morphology, the crystal microstructure and the distribution of diamond grain in the film.
用扫描电镜(sem)和X射线衍射(XRD)方法检测了复合膜的表面形貌、晶体显微结构和复合膜中金刚石颗粒的分布情况。
Comparative study on morphology, spore surface proteins and infectivity of a Endoreticulatus-like microsporidium and Nosema bombycis from silkworm, Bombyx mori, were conducted.
对来自家蚕的内网虫属样微孢子虫和家蚕微孢子虫的形态、表面蛋白及侵染性进行了比较研究。
Auger electron spectroscopy (AES), scanning electron microscopy (SEM) and atomic force microscopy (AFM) are used to analyze component and surface morphology of the films.
用俄歇电子能谱(AES)、扫描电镜(sem)和原子力显微镜(afm)对薄膜的组成成分和表面形貌进行了分析。
Particle shape, surface morphology and microstructure of skin layers and adhering satellites were studied by using optical and scanning electron microscopy.
用光学显微镜和扫描电子显微镜研究了粉末形状、表面形态和包复层、粘接处的显微组织。
The surface morphology and characteristics of the films were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), and atomic force microscopy (AFM).
该薄膜的表面形态和特征采用扫描电子显微技术(SEM)，X射线衍射(XRD)以及原子力显微技术(afm)描述。
The surface morphology of the diamond films were observed with SEM, and the resistivity of diamond films were measured with ZC36 high resistance instrument.
用扫描电子显微镜观察所得金刚石膜的表面形貌，用ZC 36高阻仪测量金刚石薄膜的电阻率。
The surface morphology measurement of the films was performed with SEM.
薄膜的表面形貌由扫描电子显微镜（SEM）测定。
The surface morphology and section view of Al substrate in different conditions and Cr deposition were observed by SEM.
利用扫描电镜（SEM）及背散射电子像，观察了不同条件下基体与铬镀层的表面及断面形貌。
It was found that morphology and surface ultrastructure of microbes were significantly affected by microgravity.
表明微生物的形态和表面超微结构与微重力的变化有关。
The effects of anodic oxidation process on thickness, corrosion resistance and surface morphology of hard oxidation film were studied.
为了研究阳极氧化工艺条件对硬质氧化膜的厚度、耐蚀性、表面形貌的影响。
Comparing and analyzing the effects of current density and additives on surface morphology of the electroforming deposit.
对比分析了电流密度和添加剂对电铸层表面形貌的影响。
Objective:To investigate the influence of occlusal surface morphology on stress distribution in the base of maxillary complete dentures(MCD).
目的：探讨异常牙合面形态对上颌全口义齿基托应力分布状况的影响。
Objective To explore the precise morphology of the sacroiliac joint surface with computer aid image analysis.
目的用计算机辅助图像分析测量骶髂关节面的解剖形态。
Effects of treatment on the surface morphology, mechanical properties and the slurry loading on templates are studied.
对处理前后有机模板的表面形貌、力学性能及对涂覆量的影响进行了研究。
Breaking process of PET fibers is discussed through analyzing changes of surface morphology of PET fibers in this paper.
本文通过研究聚酯纤维表面形态结构的变化来探讨聚酯纤维的断裂过程。
Investigated were the effects of substrate temperature on the structures and surface morphology, dielectric properties of films.
研究了衬底温度对薄膜结构、表面形貌以及介电性能的影响。
By using SEM to examine the worn surface morphology, the wear mechanisms of these coatings were explored.
通过用扫描电镜对磨损表面形貌进行的观察分析，探讨了复合涂料涂层的磨损机理。
The surface morphology of wear scar, nanoparticles and its element distribution have been tested and analyzed by scanning electron microscope(SEM) and energy dispersive spectrometry(EDS).
使用扫描电子显微镜（SEM）和能谱分析（EDS）等观察分析磨损钢球表面的磨痕形貌、化学元素和纳米粒子形态。
应用推荐