Polyethylene (PE) model of spin one-time molding process autopoietic.
聚乙烯（PE）旋塑成工艺一次性模式成型。
The molding process of foam pattern for lost form casting is introduced.
介绍了消失模铸造泡沫模样的成形过程。
Understanding of injection molding process and solving common problems; .
熟悉注塑工艺，能分析解决常见产品问题；
Pits are formed in the polycarbonate disk by an injection molding process.
坑形通过注塑工艺在聚碳酸脂盘面形成。
In this paper, the molding process of UHMW-PE milled head and its properties are introduced.
本文介绍了超高分子量聚乙烯滚压头成型工艺及制品的性能。
The application of numerical flow simulation in molding process was expounded by an example.
最后通过实例说明了注射成型流动数值模拟技术的合理应用。
The Optimization objective function of the biomass Compression molding process had been made.
提出了一种生物质压缩成型过程的优化目标函数。
The application of dynamic visualization technique in injection molding process is introduced.
介绍了可视化技术在注射充模过程研究中的应用。
Resin shrinkage during the molding process will result in a part that is smaller than the master model.
成型过程中，树脂收缩将会导致部件比原模稍小。
Molding process, equipment and die of thermosetting plastics for injection molding discussed in the paper.
论述了热固性塑料注射成型的方法、工艺、设备和模具设计方面的问题。
As one new molding process, Squeeze casting famous on the virtue of source saving and higher materials utilization.
挤压铸造是一种节能、省力和材料利用率较高的成型工艺。
The mold temperature obviously influences the molding process, while the melt temperature influences comparatively less.
模具温度对成型过程的影响较大，熔体温度的影响相对较小。
The molding process of refrigerator water receiver, structure and work process of injection mold are introduced in detail.
详细介绍了冰箱接水盒注塑件的成型工艺及注射模的结构及工作过程。
Through analyzing molding process of the circular plug crust, determined injection mold structure with double core-pulling.
通过对圆形插头壳体的工艺分析，确定了双抽芯的模具结构。
According to the press molding process of polymer matrix composite, a temperature field collection system has been developed.
针对复合材料模压成型过程的工艺特性，本文研制了一套温度场采集系统。
There are many failure modes of plastic parts during trial molding process. Every failure mode is in relation to improper designs.
在试模过程中，成型的塑件有多种失效形式，而每种失效形式都和模具设计不合理有关。
The application to an injection molding process shows the effectiveness and feasibility of the proposed method for batch industry.
通过在注塑过程的成功应用，表明了所提出方法的可行性和有效性。
A variotherm injection molding technique with steam heating and coolant cooling was studied and its molding process was also designed.
研究了一种利用蒸汽加热和冷却水冷却的变模温注塑工艺，制定了其工艺流程。
That is, software can not only be molded into almost any form, but we can also perform the molding process itself in almost any way we like.
也就是说，软件不仅可以被塑造为不同的形式，而且能够以任意方式执行这一塑造工作。
A numerical study of residual stresses and warpage was undertaken according to the characteristics of plastic injection molding process.
针对塑料注射成型工艺的特点，提出了残余应力和翘曲变形的数值模拟方法。
In this paper, molding process for low-pressure sheet molding compounds thickened by crystalline unsaturated polyester was investigated.
对结晶不饱和树脂增稠聚酯模塑料的中温低压模压成型工艺进行了研究。
Then the finite element molding process of the pulley is discussed, and the pulley is studied by the static analysis and dynamic analysis.
然后论述滚筒的有限元分析建模过程，并对滚筒做了静力分析和动态分析。
The extrusion molding process and main equipment for producing PE large diameter pipe with negative pressure sizing technology are studied.
对采用负压定径技术生产大管径聚乙烯管的挤出成型工艺及其主要设备进行了研究。
Dynamic flow process of molten polymer was studied in theory to offer a pressure drop input in the dynamic molding process of molten polymer.
从理论上分析了动态熔体流动过程，为研究聚合物熔体的动态充模过程提供流道系统压力降。
Precoated sand made of mixing this kind of resin and sand can serve as laser sintering material which suits laser rapid molding process much more.
这种烧结剂是一种改性酚醛树脂，它和作为耐火骨料的原砂混合制成覆膜砂作为激光烧结材料更加适用于激光快速成型过程。
Based on the study of molding process of telephone panel, the process of injection molding of products was simulated and analyzed by CAE technique.
文章以电话机面板外壳的成型工艺为研究对象，利用CAE技术对产品的注塑成型过程进行了模拟和分析。
This paper presents the injection parts molding process and injection mold structural characteristics and operating process of refrigerator water box.
介绍了冰箱接水盒注塑件的成型工艺特点及注塑模具的结构特点及工作过程。
Introduced molding process and characteristics of ceramic die-casting technology, and pointed out prevention for the ceramic die-casting common defects.
介绍了陶瓷型铸造制模的工艺过程和工艺特点，并指出了陶瓷型铸件常见缺陷及防止方法。
This article introduces the shrinking mechanism and molding process of heat-shrinkable tubes, Such as air inflation, mechanical expanding and winding etc.
本文介绍了热收缩套管的收缩机理及成型方法，如气压吹胀法、机械扩张法和缠绕法等。
This article introduces the shrinking mechanism and molding process of heat-shrinkable tubes, Such as air inflation, mechanical expanding and winding etc.
本文介绍了热收缩套管的收缩机理及成型方法，如气压吹胀法、机械扩张法和缠绕法等。
应用推荐