The simulation results show that this kind of DFT neural network can take the advantage of its structure and performance, and get a good result in the modeling of error correcting.
计算机模拟实验结果显示了该网络较好地利用了离散傅立叶交换在结构和性能上的优点，在天线罩视线误差校正建模研究上很好的效果。
A second modeling error that we observed results from the reuse of the same activity within a process model.
我们观察到的第二种建模错误是由某一流程模型中对同一活动的重用造成的。
These modeling modes expose technical details that apply only to the target platform, plus provide an extra level of error checking to ensure that the exported model is correct for the target runtime.
这些建模模式公开仅应用于目标平台的技术详细信息，并提供额外级别的错误检查，以确保导出的模型适用于目标运行时。
In addition, we use red dotted circles to highlight a usage of modeling elements that is causing the error, and orange dotted circles to highlight a usage of modeling elements that is not recommended.
此外，我们还使用红色的虚线圆来突出显示导致错误的建模元素，并用橙色的虚线圆突出显示不推荐使用的建模元素。
A deadlock is always a modeling error: some of the desired process behaviors are missing due to non-executable activities in the model.
死锁始终是一个建模错误：因为流程中无法执行某些活动，所需的部分流程行为丢失。
A lack of synchronization can be a modeling error if more than the desired process behaviors occur, but it's not always an error (unlike a deadlock).
如果出现的流程行为超过需要，则缺乏同步便是一个建模错误，但它并非始终是一个错误，这一点与死锁不同。
If the data or control flow in and out of activities is relevant to understand the cause of the modeling error, we use the notation in the upper half of the figure.
如果活动内外的数据或控制流与理解导致建模错误的原因有关，我们将使用此图上半部分中的符号。
A mathematical modeling of aiming system accuracy resulting from sensor error is proposed.
给出了由传感器误差导致的操瞄系统误差的数学模型。
Its defect is the system modeling error or external disturbance to the results of the fault diagnosis will produce significant influence.
其缺点是系统的建模误差或外部干扰将对故障诊断的结果产生重大的影响。
On the basis of error analysis of finite element modeling, the multi-level model updating is put forward for long-span Bridges.
在有限元模型误差来源分析的基础上，提出了大跨桥梁结构模型误差的分层次修正方法。
The simulation experiment shows that the system has better performance of vibration suppression control and stronger robustness for modeling error of load inertia moment.
仿真实验表明，该系统具有良好的防振控制性能，而且对负载惯性矩的模型化误差具有较强的鲁棒性。
According to the feature of flexible machining, it be studied that the scheme and key technology of on-line modeling and prediction of machining error based on genetic neural network.
针对柔性加工过程的特征，研究了基于遗传神经网络的加工误差在线建模预报的方案和关键技术。
Error analysis, modeling and compensation of MEMS gyroscope and its application in navigation of flight vehicle are researched in this paper.
本文主要研究了微机电陀螺的误差分析、建模和补偿，以及在飞行器导航中的应用。
System simulation process indicates, it is more convenient, more fast and more accurate than the traditional method of modeling, and it is easy for error checking and computer programing.
系统仿真过程表明，该建模方法易于检查错误和计算机求解编程，比传统的建模方法更方便、快捷、准确。
The control system must be adaptive to the uncertain parameters to overcome the modeling error, uncertainty of the hydrodynamic parameters and unknown ware disturbances.
由于自主水下航行器建模误差、流体动力学参数的不确定性和未知海流干扰，控制系统必须具有对不确定参数的自适应能力。
The adaptive compensation term of the optimal approximation error is adopted to minimize the influence of the modeling error and the parameter estimation error.
并通过引入最优逼近误差的自适应补偿项来消除建模误差和参数估计误差的影响。
The basic principle and method of grey system model and its application in thermal error modeling on machine tools had been presented briefly.
提出了采用灰色系统模型进行机床热误差建模的基本原理及方法，以及其在机床热误差补偿建模中的应用。
The methods to reduce the machine tool thermal deformation are: thermal error modeling and compensation, temperature control, optimization design of thermal state characteristics.
减少机床热变形的方法为：进行热误差建模和补偿，温度控制，热态特性优化设计。
The geometric error modeling of NC machine tools is the key technique to dynamics design, precision analysis and error compensation. It is the important step to improve the precision of machine tools.
数控机床的误差建模是进行机床运动设计、精度分析和误差补偿的关键技术，也是保证机床加工精度的重要环节。
The adaptive modeling is applied to the error path of the system in this paper, then the process and the algorithm of the adaptive modeling are given.
本文对系统的误差通道采用自适应建模的方法，并提出了自适应建模的过程及算法。
This subject involves a platinum resistance online detection system, which can eliminate the error in the measurement of platinum resistance though the mathematics modeling of the software.
本课题设计了一种通过软件数学建模来消除铂电阻测量中可能产生误差的铂电阻在线检测系统。
The network can reduce the modeling error for the piezoelectric actuator of a nanometer positioning system. Experimental results proved validity of the algorithm.
将该网络应用于纳米定位系统压电陶瓷执行器迟滞建模中，可以降低建模误差，实验结果验证了该方法的有效性。
To compare the results of static and dynamic test with initial finite element model calculations, error analysis of finite element modeling has been developed.
基于试验模型的静力试验和振动试验结果与初始有限元模型计算结果的比较，展开对面向健康诊断的悬索桥有限元建模的模型误差分析。
According neural network theory, we studied the method of modeling for Dynamic Error.
本文根据神经网络原理，研究动态误差的建模方法。
This is also a precise modeling measurement method. Compared with the DC exciting and direct reading method, the identification of this method can be much smaller than the digitized error.
这是一种模型化精确测量方法，与以往的直流激励读取法相比，评价结果的分辨力和不确定度可以远小于量化误差。
The basic principle and method of time series analysis and its application in thermal error modeling on NC machine tools were presented.
提出了采用时间序列分析法进行机床热误差建模的基本原理及方法，及其在数控机床热误差补偿建模中的应用。
Then the modeling method is applied on the tuning of temperature measuring error during the processes of oil pipes are heated.
采用这一建模方法对石油钻杆在热处理过程中的温度测量偏差进行校正。
Solar radiation is the foremost source of energy for Earth climate, so a minor error in calculation of the heating rate about short wave radiation may cause a prodigious mistake in climate modeling.
太阳辐射是地球气候最终的能量源，在短波辐射加热率计算中的一个小的误差就可能引起气候模拟中很大的误差。
Solar radiation is the foremost source of energy for Earth climate, so a minor error in calculation of the heating rate about short wave radiation may cause a prodigious mistake in climate modeling.
太阳辐射是地球气候最终的能量源，在短波辐射加热率计算中的一个小的误差就可能引起气候模拟中很大的误差。
应用推荐