The mathematic model of gas turbine engine is important for the development of ship power and its control system. The key of modeling is the precision and convergence.
建立燃气轮机数学模型是船舶动力及其控制系统研制的重要手段，建模的关键在于提高精度和收敛速度。
VR system is composed of inspect and test module, feedback module, sensor module, control module, 3d module and modeling module.
VR系统由检测模块、反馈模块、传感器模块、控制模块、3d模块和建模模块构成。
Both control laws do not require the knowledge of the system parameters and are robust to modeling errors.
两种控制律不需要知道系统参数，对模型误差具有鲁棒性。
Chapter Three introduces the modeling and simulation of the control system.
第三章是控制系统的数学建模与分析。
The modeling result based on UML is static description for the command, control, communication, intelligence (C3I) system, but the essence of C3I system is dynamic.
基于UML的C3I系统模型的设计结果是对系统的静态表述，而C3I系统的本质是动态的。
The kinematics modeling and parameters adapt fuzzy-PID control system design of the video regulator manipulator on the terminal of the arm is the focus of this text.
本文的主要工作是机械臂终端多自由度视频头调节机械手的运动学建模及其参数自适应模糊PID控制系统的设计。
The core of the virtual prototype technology is on the realization of modeling theories and technology, mechanical system dynamics, finite element theory and control theory, etc.
虚拟样机技术的核心是机械系统动力学、有限元理论和控制理论等建模理论及其技术的实现。
The simulation experiment shows that the system has better performance of vibration suppression control and stronger robustness for modeling error of load inertia moment.
仿真实验表明，该系统具有良好的防振控制性能，而且对负载惯性矩的模型化误差具有较强的鲁棒性。
Behavioral approach as an important method in the study of dynamical system has extensive applications in system modeling and control design.
行为方法是研究动态系统的一种重要手段，在处理系统建模和控制设计中都有广泛而灵活的应用。
From the linearization procedure, a new approach of system identification that is on-line real time modeling and real time feedback control correction can be found.
但研究发现，在这种线性化过程中，包含了一种新的系统辨识思想，那就是在线实时建模一实时反馈控制校正的思想。
The pneumatic servo positioning system, which is composed of rodless cylinder and the servo valve, is studied on mathematical modeling and control in this paper.
本文对由伺服阀和无杆气缸组成的气动伺服位置控制系统进行了数学建模和控制研究。
Modeling and model management have been further studied with anthropoid and intellectualization, and will be used widely in real time optimal control of dynamic system.
本项研究有利于促进和深化建模与模型管理的类人化、智能化研究，在动态系统的实时优化控制领域具有较广阔的应用前景。
The qualitative modeling and qualitative control of complex system is overviewed.
综述了复杂系统的定性建模和定性控制。
SVM has been applied to many fields such as pattern recognition, data mining, modeling and control of nonlinear system due to good generalization ability and globally optimal performance.
SVM由于其良好的泛化能力和全局最优性能，在模式识别、数据挖掘、非线性系统建模和控制等领域中展现出广泛的应用前景。
The control system must be adaptive to the uncertain parameters to overcome the modeling error, uncertainty of the hydrodynamic parameters and unknown ware disturbances.
由于自主水下航行器建模误差、流体动力学参数的不确定性和未知海流干扰，控制系统必须具有对不确定参数的自适应能力。
Based on the mathematical model of AC asynchronism motor, a novel method for modeling and simulation of AC asynchronism motor control system in Matlab was proposed.
在分析交流异步电动机数学模型的基础上，提出了交流异步电动机控制系统仿真建模的新方法。
The result shows that NURBS modeling is the final technical project to complete the task of design and modeling, for it has the best balance in accuracy? Control and system resources impropriate rate.
NURBS建模手段因在精确性、控制性和系统资源占用率的平衡性最优而确定为最终技术方案，以完成设计与建模任务。
For the networked control systems with multi-packet transmission and uncertain short time delay, system modeling and control problem are studied in the case of uncertain packet transmission sequence.
针对短时延的多包传输网络控制系统，研究了数据包传输次序不确定情况下系统的建模及控制问题。
This paper discusses the considerations in the modeling of a new type of nuclear power plant for its control system simulation in a wide power range.
针对研发的采用一体化布置、全功率自然循环的低温核反应堆电站，建立了一个可用于大功率运行范围控制系统仿真的动态数学模型。
The pneumatic servo valve can preferably be choose and used promoting the precision of control system through the analysis and mathematical modeling of pneumatic servo valve.
对气动伺服阀的分析和数学建模，可以更好的选择利用气动阀，提高控制系统的精度。
UML activity diagrams can be used to describe the control flow of different abstract levels and are very suitable for modeling system behaviors.
UML活动图可以表示不同抽象级的控制流，很适合用于对系统的行为建模。
This thesis introduces the working principle, craftwork requirement, modeling process, control strategies and the realization of LF refining furnance bottom blowing Argon control system.
本文介绍了LF精炼炉底吹氩过程控制系统的工作原理、工艺要求、建模过程、控制策略以及控制系统的实现。
Aiming at the problem of difficult system identification modeling for control system, an identification modeling system was designed for control system by using support vector regression (SVR).
针对非线性控制系统辨识建模较为困难的问题，利用回归型支持向量机(SVR)设计了一例控制系统的辨识建模系统。
Applying the method of combining the mechanism analysis modeling and gray box modeling, the mathematic model of the single-shaft gas turbine generating units and the control system was established.
应用机理分析建模和灰箱建模相结合的方法，建立了单轴燃气轮机发电机组及其控制系统的数学模型。
The modeling is the key technology for analyses and control of a reconfigurable manufacturing system and the equipment modeling constructs the basis of the system modeling technology.
可重构制造系统的建模是分析和控制可重构制造系统的关键技术，而可重构制造系统中的设备建模是可重构制造系统建模的基础。
In the implementation of active noise control, it is very important for accurate secondary paths modeling to keep the stability of the control system.
在有源噪声控制系统实现的过程中，次级通路建模精度对有源控制算法实现、系统的稳定性及降噪量都有重要影响。
The method of generalized modeling in a large scale system was used for reference to construct a generalized model of SoftMan emotional control.
借鉴大系统控制论中广义模型化方法，建立了软件人情感控制的广义模型。
The method of generalized modeling in a large scale system was used for reference to construct a generalized model of SoftMan emotional control.
借鉴大系统控制论中广义模型化方法，建立了软件人情感控制的广义模型。
应用推荐