Finally we use this dynamic model of optimization in mean-shift algorithm, and compute object's true position.
最后将最优化的运动模型用于基于核的均值转移算法中，从而获得运动目标的精确位置。
A hierarchical model of optimization selection is built through analysis of multi-influence factors to seepage control type selection.
通过对防渗类型选择的众多因素进行分析，建立了层次优选模型。
So it is necessary to establish the mathematical model of optimization for drilling parameters, which agrees with the drilling conditions.
必须创建与钻井条件相适应的钻井参数优化数学模型。
The mathematical model of optimization design for swing movable teeth drives is set, and the optimization design method is proposed in this paper.
本文建立了摆动活齿传动的优化设计数学模型，提出了优化设计方法。
The paper gives multiple target optimizations and builds the mathematical model of optimization design of the cycloid pin gear epicylic decelerator .
通过对摆线针轮行星减速器设计的过程分析，进行了多目标优化设计，建立了摆线针轮行星减速器优化设计的数学模型，经实例计算表明，该方案是可行。
The optimization design of articulated steering mechanism of the loader is investigated. The mathematical model of optimization design is established.
本文对装载机铰接式转向机构的优化设计问题进行了研究，给出了它的优化设计数学模型。
The movement of particles in electrocyclone has been analyzed, aimed at forecasting its configuration sizes, a mathematics model of optimization size was developed.
对静电旋风分离器中尘粒的运动进行分析，建立了尺寸优化的数学模型，预测了其结构尺寸。
The characteristics of mathematical model in optimization design and some problems of key techniques in the diagnosis of mathematical model of optimization design have been analyzed.
分析了优化设计数学模型的特点，以及优化设计数学模型诊断中的一些关键技术问题，主要研究了利用逐步缩小公共域的方法对约束条件进行诊断。
Based on analyzing the encoding characteristics of POCSAG carefully, the Problem can he abstracted as a special Traveling Salesman Problem, soa mathematical model of optimization encoding is set up.
经过对POCSAG码编码特性的分析，这一问题可以抽象为一个特殊的旅行商问题，从而得出优化编码的数学模型。
It refers to the act of cutting across the established divisions of responsibility (such as logging and performance optimization) in a given programming model.
它指的是在一个给定的编程模型中穿越既定的职责部分（比如日志记录和性能优化）的操作。
It also helps in generation of data migration maps, to perform dependency analysis and also helps in optimization of target system data model.
还有助于生成数据迁移映射，以执行依赖性分析，而且还有助于优化目标系统数据模型。
Lack of dynamic process optimization has made it very hard to change a process model on the fly in a production environment.
由于缺少动态流程优化，因此很难动态地更改生产环境中的流程模型。
This optimization method which based on the model of virtual prototype has general applicability to the optimized research of loaders' working device.
这种基于虚拟样机模型的优化方法对于装载机工作装置的优化研究具有普遍的适用性。
Aim at the problem, this paper establishes the mathematical model of multipurpose optimization to made hoisting mechanism to occupy minimum space and planet gear to use minimum material.
针对这一问题，建立了以起升机构占用空间最小和行星齿轮减速机构用材最少为目标的多目标最优化数学模型。
This optimization method which based on the model of virtual prototype has general applicability to the optimal research of loaders' working device.
这种基于虚拟样机模型的优化方法对于装载机工作装置的优化研究具有普遍的适用性。
Model predictive control was applied to solve the dynamic optimization problems of the inventory in supply chain management for the demand uncertainty of supply chain under networked manufacturing.
针对网络化制造环境下供应链需求不确定的特点，采用模型预测控制技术解决供应链管理中库存的动态优化问题。
By recognition of work condition, off-line identification and on-line optimization of parameters, hybrid model can be used to simulate dynamics of complex process correctly in a large scale.
通过工况的识别以及模型参数的离线辨识和在线优化，混合模型可以准确地模拟复杂过程在大范围内的动态特性。
The research of technology parameters definition, optimization and prediction which focused on worker experience and traditional arithmetic model building in past literature.
以往文献对工艺参数的确定和优化研究都是集中在以工人的经验和传统数学模型的建立。
In this paper, optimization of phase change parameter and hardening parameter of closed hierarchical single surface model is studied.
对封闭型分级单屈服面模型参数中的阶段改变参数和硬化参数的优化进行了研究。
With the study of neural network model, this paper advances some of improvement and optimization techniques that can accelerate the learning speed of network and increase the stability of model.
本文从神经网络模型的结构出发，对学习算法提出了一系列改进和优化措施，以加快网络的学习速度，并增加模型的稳定性。
Considering the boom cross section as a whole, a parametric finite element model and a parametric optimization model for local stability calculation of a boom structure were established.
将吊臂截面作为整体考虑，建立了吊臂结构局部稳定性计算的参数化有限元模型和参数优化模型。
In this paper, an OR based production optimization model is introduced to overcome the weakness of MRPII.
介绍一个基于运筹学模型技术的集成生产计划优化模型以克服原MRPII模型的不足。
According to the structure character of the model, it's adopted by hierarchic optimization strategy.
根据模型的结构特点，提出分层次优化的求解策略。
An optimization model to find the lowest budget schedule of network planning is established under the assumption that the time-cost relationship is nonlinear.
在时间-费用关系为非线性的假设下，建立求网络计划最低成本日程的优化模型。
After a brief description of the inertia vibrating mechanism with twin axles, the analysis and optimization method of dynamic model with two degrees freedom.
本文概要论述了双轴惯性振动机构，两自由度动态模型的分析和优化方法。
The system optimization model is built by methods of unit process simulation, process system simulation and system optimization.
采用“单元模化—系统模化—系统优化”构造出该冶金系统的优化工序模型。
The application of optimization methods in food theology study are reviewed in this paper. A few kinds of important mathematical model are given.
本文综述了最优化方法在食品流变学研究中的应用，提出了几种主要的数学模型。
A new multi-objective optimization evolutionary algorithm based on the model of cooperative co-evolution is proposed in this paper.
基于合作型协同进化模型，提出了一种新型的多目标优化进化算法。
Based on the cable-stayed bridge using method of cantilever, the paper establishes the optimization model of construction phase with multi-objective and multi-constraint and gives the example.
采用多目标、多约束的优化方法，以悬臂施工主梁的斜拉桥为例，建立了施工阶段的优化模型，并给出算例。
Based on the cable-stayed bridge using method of cantilever, the paper establishes the optimization model of construction phase with multi-objective and multi-constraint and gives the example.
采用多目标、多约束的优化方法，以悬臂施工主梁的斜拉桥为例，建立了施工阶段的优化模型，并给出算例。
应用推荐