The border of laser beam penetration welding seam is simulated by the constructed heat source model and compared with the experimental results.
应用所建立的热源模型模拟分析了激光深熔焊焊缝边界形状，并与实验结果进行了比较。
The theoretical model can be applied to the design and analysis of soil source heat pump system.
该理论模型可应用于土壤源热泵系统的分析和设计中。
A mathematical model was developed to investigate mass flow rates in the heat transfer pipes of the air side heat exchanger with and without distribution pipes for an air source heat pump.
建立分液管和换热器的数学模型，对空气源热泵风侧换热器在有、无分液管的情况下的各盘管中质量流量分配问题分别进行研究。
The result proves that the short time step model can be used to predict heat exchange performance of the underground heat exchanger and to design and optimize a ground source heat pump system.
结果表明，短时间步温度反应系数模型可以较好地预测埋地换热器的换热性能，为地源热泵系统的设计与优化提供了依据。
Base on several common U-tube heat transfer models of ground source heat pump, this paper proposes a transient heat transfer model for single U-tube vertical heat exchanger.
介绍了几种常见土壤源热泵u型埋管换热器传热模型，建立了单u型垂直埋管换热器的非稳态传热模型。
Taking the hybrid ground source heat pump with cooling tower as research object, a simplified calculation model of buried tube heat exchanger is established.
以配置冷却塔的复合式土壤源热泵为研究对象，建立了地埋管换热器简化计算模型。
This article established displacement natural ventilation model caused by point heat source of two joined rooms. The room vertical temperature profile was simplified as two uniform zones.
本文建立两相连房间点热源作用引起的置换自然通风模型，将室内垂直温度分布简化为上、下两个均匀混合区域。
The three-dimensional numerical model of the vertical borehole heat exchanger of ground source heat pump was established and the accuracy of numerical model was verified in this paper.
以地源热泵垂直埋管换热器为研究对象，建立地源热泵垂直埋管换热器的三维数值模型，通过实验对数值模型进行验证。
The mathematic model of transient thermal process in welding is established to simulate the moving of the heat source.
建立焊接瞬态温度分布数学模型，解决焊接热源移动的数学模拟问题。
The steady mathematic model of water source heat pump unit for small house is established, and the characteristics of the unit are simulated.
建立了小型住宅用水源热泵机组稳态数学模型，对机组特性进行了模拟。
The mathematical model presented here may provide design guidance for the design of underground heat exchanger for ground source heat pumps.
所建立的数学模型可为土壤热源热泵地下热交换器的设计提供参考。
According to the principle and structure of the disk-type electrode, a new corresponding heat source model was derived using the traditional volume heat source model for reference.
针对非熔化盘式电极原理与结构特点，借鉴传统体积热源模型，推导了相应的热流分布模式。
The inductive heat source can thus be simplified as that of a thermal surface current and a model for the instantaneous temperature of heated parts thereby established.
根据研究结果将感应加热热源简化为表面热流边界条件，建立了加热阶段零件内瞬态温度变化规律模型。
The research status and development of heat source model on laser deep penetration welding were summarized and three kinds of resolution model about heat source were introduced.
综述了激光深熔焊接热源模型的研究现状与进展。介绍了三种解析解热源模型。
The influence of the operating model, heat source, control method, local weather condition and building heat preservation level on energy consuming of radiant heating system was analyzed.
分析了低温地板辐射供暖系统的运行方式、热源种类、调节控制模式及当地气象条件、建筑物保温程度和热性能等多种因素对能耗的影响。
Based on this model, the one-dimensional energy conservation equation with a special term of inner heat source is applied to solve the temperature profile.
根据此模型，应用带有特殊内热源项的一维能量守恒方程求解了温度场。
By using the seismic source model of crack containing hyperpressure gas, the course of radioactive heat energy in the earth to accumulate in the focal area and cause for earthquake are studied.
根据含超压气体裂隙震源模式，分析了地球内部放射热能向孕震区积聚的过程。
The paper aim at the phenomenon of stratification on thermal properties of soil parameters in the depth direction, and combine the traditional cylindrical heat source model and the V.
本文针对土壤的热物性参数在深度方向存在分层的现象，结合传统的圆柱源模型和V。
The utility model can refrigerate or heat as long as transforming the polarity of a power source.
只要变换电源极性就能致冷或者致热。
The simplest convection model is that of a contained layer of liquid sitting above a point heat source.
在简单的层流对流模拟中，大型的烟流从地核底部一路延伸到顶端。
A mathematical model was established to study the indoor environment at different conditions of envelopes, indoor heat source and running mode with embed-pipe floor heating.
建立了低温热水地板辐射供暖系统间歇运行时室内热环境数学模型，利用模型计算了不同运行方式、内围护结构和内热源作用下室内热环境变化规律。
In order to realize the dynamic simulation of temperature filed, gauss heat source model was adopted, and APDL language was used to compile program to apply moving heat source load.
建立高斯热源模型，并通过APDL语言编写程序实现热源的移动加载，对焊接温度场进行动态模拟。
A general steady-state simulation model was presented for predicting the performance of air source heat pump unit in low ambient operating conditions.
本文利用已建立并通过实验验证的空气源热泵机组稳态仿真数学模型，对机组在新工况与常规工况下的低温稳态特性进行了计算机仿真。
The utility model belongs to the technical field of a water source heat pump, a ground source heat pump and a vapor compression type cooling water machine set.
本实用新型属于水源热泵、地源热泵和蒸汽压缩式冷水机组的技术领域。
A mathematical model for simulation of ground source heat pump system is built based on line heat source theory.
本文中的模型可以对土壤源热泵系统的设计方案进行经济性评估，以便设计人员选取经济性较好的方案。
The utility model is a superconducting device of self heat source of oil well avoiding wax and reducing viscosity, and belongs to novel field of heat transfer technology of vacuum tube.
本实用新型为一种油井自热源超导防蜡降粘装置，属真空管传热技术新领域。
The method of element birth and death was applied to simulate the model of loading welding heat source.
文中简要介绍了焊接过程数值模拟热源的各种加载模式：高斯分布函数、双椭球分布函数、生死单元方法。
The method of element birth and death was applied to simulate the model of loading welding heat source.
文中简要介绍了焊接过程数值模拟热源的各种加载模式：高斯分布函数、双椭球分布函数、生死单元方法。
应用推荐