A layered sampling model for fuzzy comprehensive evaluation was developed based on simple random sampling methods.
在简单随机抽样方法的基础上提出了分层抽样的模糊综合评价模型。
A model based control scheme employing computed-torque control has been presented, and its applications in three different path planning methods have also been discussed.
设计了一基于模型的计算力矩控制算法，并深入探讨了其应用于三种不同轨迹规划方法下的控制性能。
Methods: Based on Markov random fields model of noise, a iteration algorithm was presented by using maximum a posteriori (MAP) criterion.
方法：根据马尔科夫随机场图像模型，利用最大后验概率准则(MA P)，提出一种迭代松弛分割算法。
The main results are: (1) For a dual-rate sampled system, the design methods of predictive controller based on state-space model and input-output model are given respectively.
论文的主要结果有(1)对双速率采样系统，分别给出了基于状态空间模型和输入输出模型下的预测控制器的设计方法。
After comparing all kinds of classification methods, this paper shows a new kind of ECG automatic diagnostic system based on the CBR model and some key points on ECG database design in the CBR model.
本文在比较各种分类算法的基础上，提出了应用CBR模型建立心电图自动诊断系统的构想，并阐述了CBR模型中心电图实例库设计的若干关键问题。
METHODS Based on cell culture model in vitro, MTT test was used to study the inhibitory effect of curcumin derivatives on tumor cell lines.
方法利用体外细胞培养模型，应用MTT法分析姜黄素衍生物对不同肿瘤细胞生长的影响。
Based on the study of designing pattern of multi-dimensional data model, three designation methods are pointed out.
研究了多维数据模型的设计模式，给出了三种主要的设计方法。
By analyzing negotiation based coordination methods and Contract Net Protocol, the cooperation model of "station based on requirement, mount guard through competition" is presented.
在分析了基于协商的协作方法、合同网协商协议的基础上，提出了按需设岗，竞争上岗的协作模型。
Based on the quantity model, the traditional methods could not analyze the product disassembling in a conceptual design.
传统的方法基于定量模型，无法在概念设计阶段分析出产品的可拆卸性。
The accuracy, reliability, and application scope of NIR method are depended on the calibration model developed by the database based on routine analytical methods.
由于该技术测定的准确性、可靠性、适用范围等都依赖于以常规测定方法为基础建立起来的校正分析模型。
This paper presents a reactive power optimization model that is based on successive quadratic programming methods.
介绍了一种无功优化模型，并基于连续二次规划的方法。
Based on statistical self-similarity of reserves of ore deposits and applying the methods of probability and statistics, a fractal model of reserve-size was established.
根据矿床储量的统计自相似性，应用概率统计方法建立了矿床储量规模的分形模型。
All the methods are based on economic block model of ore body built according to geological statistics theory.
这些计算机优化方法都是在应用地质统计学方法建立的矿床块段模型基础上实现的。
The reliability analysis of DC sensor based on its reliability model is processed, and the methods used to improve the system reliability are presented.
基于可靠性模型对该直流传感器进行了可靠性分析，并提出了改进系统可靠性的措施。
The nonlinear dynamic correcting methods based on block oriented model are researched for the sensors based on oriented model with the nonlinear static characteristic of saturation in first quadrant.
针对以块联模型表示，且静态特性位于第一象限的饱和型非线性传感器，进行基于块联模型的动态非线性校正方法研究。
Finally, we give a test tool model based on the methods we discussed in this dissertation and some Suggestions on software testing process improvement.
最后，在本文研究的方法的基础上，给出了一个基于文中方法的测试工具的模型，并提出了一些测试工作改进方法的设想。
After comparing and analyzing existing face detection methods based on complexion, a skin model used to detect human faces in this thesis, Gaussian distribution model is proposed.
研究了常见的基于肤色的人脸检测算法并分析比较其优缺点，给出本文利用肤色特征进行肤色检测时所采用的肤色模型——高斯分布模型。
This paper presents a mathematical model, a scheme of optimum methods and basic computation formulas for optimum design of mechanical antivibration characteristics based on model analysis.
本文提出以模态分析为基础的机械抗振性能优化设计数学模型、优化设计方法方案及基本运算公式。
Results Under model misspecification conditions, propensity score methods had better robustness than model based methods.
结果当存在模型误定时，倾向指数方法比基于模型的方法具有较好的稳健性。
On basis of this model, the modeling methods and modeling flow were discussed based on data source of geological observation, drillhole, ichnography and section map.
在此基础上，探讨了在基于地质观测数据、钻孔数据、平面图数据、剖面图数据的断层建模方法和建模流程。
The Appliance of Mission Driving is a kind of teaching methods of inquiry - based teaching model and it is applied widespread in curriculums'teaching of computer now.
“任务驱动法”是实施探究式教学模式的一种教学方法，目前在计算机课程的教学中被普遍采用。
The paper makes a comparative study on the methods of building ontology, presents their limitations, and puts forward a methodology of prototype based on spiral model.
本文对目前国内外主要的本体构建方法进行了比较研究，分析其局限性，并借鉴软件工程的思想提出了一种螺旋-原型的本体构建方法。
Conclusion For large and complicated data, propensity score methods had more flexibility in practical use than model based methods.
结论对于大量、关系复杂的数据，应用倾向指数方法具有较大的灵活性。
Experimental results show that shot boundary detection methods, based on the shot boundary coefficient model, can improve the performance of shot boundary detection.
实验结果表明，基于镜头边界系数模型的镜头边界检测方法能明显改善镜头边界检测结果。
The emphasis is placed on general structure and implementation methods of equipment MIS based on B/S model.
着重研究了基于B/S模式的设备管理信息系统的总体结构和实现方法。
This paper describes the main idea and process of qualitative reasoning based on component model, and analyses the causal interpretation methods of system behaviors.
本文阐述了基于部件模型的定性推理方法的基本思想和过程，并对系统行为的因果解释方法进行了分析。
This paper confirms urban ecosystem health assessment indicators system, and establishes attribute synthetic assessment model and methods based on the attribute theory.
确定了城市生态系统健康评价指标体系，提出了基于属性理论的城市生态系统健康属性综合评价模型。
To solve the classification of dynamic signal, this paper proposed a feedback process neural networks model and classification methods based on this model.
针对动态信号模式分类问题，提出了一种反馈过程神经元网络模型和基于该模型的分类方法。
To solve the classification of dynamic signal, this paper proposed a feedback process neural networks model and classification methods based on this model.
针对动态信号模式分类问题，提出了一种反馈过程神经元网络模型和基于该模型的分类方法。
应用推荐