The assumption mode method is utilized to derive the motion equations of the structure.
采用假设模态法建立系统的运动微分方程。
In this paper, dynamics of a rotating flexible beam is investigated by the assumed mode method.
采用假设模态法对旋转运动柔性梁的动力特性进行研究，给出简化的控制模型。
The significance of study on the subject is to develop a non-contact mode method of caliper logging.
课题研究的意义在于研制一种通过非接触方式测量井径的方法。
The measured parameters of the waveguide agreed with data measured by using guided mode method in measuring error ranges.
测得的波导参数在测量误差范围内与用导模法测得的数据一致。
Firstly, the ray method and normal mode method are used to calculate the acoustic field in underwater with the source in the air.
首先，用射线方法和简正波方法对空气中的声源在水下产生的声场进行了分析。
An improved mixed-mode method was proposed, and the revised formula of calculating the valid elastic modulus of composites was given.
提出了一种改进的混合律方法，并给出了计算等效弹性模量的改进公式。
With an example of simply supported rectangular panel, this paper presents a new method for analysis of structure borne sound by radiation mode method.
以简支矩形板为例，通过声辐射模态研究结构声辐射问题。
Besides, the principle to select the number of structure modes based on the divergence eigenvector in the mode method and the flutter method is produced.
另外，还提出了在模态法和颤振法中基于发散特征向量的结构模态选取原则。
EDV, ESV, and LVEF were calculated using Simpson's rule algorithm for monoplane LV angiography, using M-mode method for two-dimensional echocardiography.
左室造影采用单平面法(辛普森法则)，二维超声心动图采用M型超声获得EDV、ESV和LVEF。
In this paper the analytic mode method and numerical mode method for full wave analysis of electromagnetic scattering in cylindrically layered media are discussed.
本文讨论了径向柱面分层介质中全波分析的解析模式和数值模式方法。
Study modelling thought, network configuration, majorize GNNM(1,1) mode method and learning algorithm of GNNM(1,1) mode combined grey system theory and neural network.
研究了灰色系统理论与神经网络组合的灰色神经网络GNNM（1，1）模型的建模思想、网络结构及其优化GNNM（1，1）模型的方法和学习算法；
To investigate the torsional vibration of the system, the dynamics governing equations of the system is established using the Lagrange equation and the assumed mode method.
为了研究此系统的扭转振动，运用拉格朗日方程和假设模态法建立了系统的动力学方程。
The parameters of the optical slab glass waveguide (refractive index and thickness of thin film) were measured by a new technique for using the prism coupler, i. e., leaky mode method.
由使用棱镜耦合器的一种新技术即漏模法，测量了平板玻璃光波导的参数(薄膜的折射率和厚度)。
Three additional displacement ratio calculating methods, i. e., the first mode method, elastic time history analysis method and calculating plane end displacement method, are suggested.
提出了三种计算结构位移比的补充方法，即第一振型法、弹性时程分析法和推算平面端部位移法。
Using the Marlkef s mode method, the author also forecasts the imaginabale fireworks safety accidents in order to help the decision-makings more reasonable and the controlling more rightly.
运用灰色马尔可夫模型对全国各地花炮安全经济事故进行预测，为宏观安全决策和事故控制提供重要的理论依据，使其决策合理，控制正确。
The branch Mode Method is used to reckon missile's structural dynamic characteristic, and the whole missile is regarded to be composed of three branches-the fuselage, the wings and the rudders.
以分枝模态法为基础，将全弹分成弹身、弹翼和舵面三个分枝，建立全弹结构动力学模型。
The last respect is concerned with the combination of the featurebridging mode method with dynamic programming to reduce the problem of globalimage matching into one of finding the optimal path.
后者是将跨接法与动态规划相结合，将整体影象匹配归结为求解最优路径问题。
The portable collector method involves exporting the collector and running it in a text-only, console mode.
便携收集器方法指将收集器导出并在仅包含文本的控制台模式运行。
This tends to be a preferred method of trying out software in "restricted demo" mode compared to having to install an application on your desktop that you may not end up buying.
这种方法往往比通过“受限制的演示”模式试用软件更好，因为演示模式要求用户在桌面计算机上安装他们可能不会购买的应用程序。
Static trials represent an experimental test method of defected mode and static strength of a plane construction.
静力测试提供了一种检测飞机机体结构破坏模式以及静强度的试验方法。
When the character following the file mode bits is a space, there is no alternate access method.
当跟随文件模式位的字符是空格时，就表示没有替换访问方法。
This mode of detection cuts out the defects of the previous method; it is justified by the actual nature of the breakdown phenomena.
这种检测方法避免了前种方法的缺点；它由击穿现象的实际属性来进行判别。
Linear mode is one of the simplest methods of combining two or more block devices into a "RAID" volume — the method of simple concatenation.
线性模式是将两个或多个块设备组合为一个“RAID ”卷的最简便方法之一——只是将设备连接起来。
No transaction is started because of the SUPPORTS propagation mode, so the method effectively USES a local (database) transaction.
由于传播模式被设置为SUPPORTS，所以不会启动任何事物，因此该方法有效地利用了一个本地(数据库)事务。
The template can be bound to a UML method, and is applied when explicitly generating code when Generate code is selected from the context menu, or automatically when Autosync Mode is enabled.
模板可以绑定到UML方法，且当从上下文菜单中选择GenerateCode生成代码时被应用，或当Autosync Mode启用时自动执行。
With the stub method, the application has to be aware it is in "stub mode" so it can exercise the different code path.
使用stub方法时，应用程序需要知道它正处在“stub模式”下，这样才可以执行不同的代码路径。
The editCD() method prepares the controller to display the cdForm.jsp page in editing mode.
editCD()方法准备控制程序以使用编辑模式来显示 cdForm.jsp页面。
A client mode connection is created by passing a string identifying a destination address to the Connector.open method.
通过将标识着目的地址的字符串传递到Connector. open方法来创建客户机方式连接。
You can kill the connection either by using the kill command with Control-C (if you've started up in non-daemon mode), but the best method is to use the gvpectrl command shown in Listing 11.
可以使用 kill命令和Control-C 终止连接（如果以非守护进程模式启动的话），但最好的方法是使用gvpectrl 命令，如 清单11 所示。
Things to note about this method are the use of the default connection and setting the autocommit mode to false.
对于这个方法，需要注意默认连接的使用，还要将自动提交模式设为false。
应用推荐