The coils all get tuned to the right operating frequency and electricity is transferred to them using a switch-mode controller.
当这些线圈被调节到合适的操作频率，电流就可以通过一个开关控制器转换给这些线圈。
A dynamic design method of robust sliding mode controller in AC servo system is proposed in the paper.
文章提出了一种适用于交流伺服系统的鲁棒滑模控制器的动态设计方法。
First, a study of a sliding mode controller under on off training is made and then the on line learning algorithm using a gradient decent method is designed.
首先研究了离线训练的滑模控制器，然后，给出了利用梯度下降法的在线训练方法。
To correct the power factor, the controlling effect of both neural network controller (NNC) and current mode controller (CMC) is researched in this paper.
为改善功率因数，对神经网络控制器(NNC)与电流模式控制器(CMC)的控制效果进行了仿真比较研究。
After state preestimate and state movement analysis, a discrete sliding mode controller which can essentially avoid the chattering phenomenon is designed.
通过系统状态预估及对状态运动的分析，设计了可以完全消除系统抖振的滑模控制器。
Aiming at the nonlinearity of machine tool axis, this paper presents the methodology of fuzzy slide mode controller based on slide mode control theory in the viewpoint of VSS.
本文针对数控系统轴控制中存在的非线性问题，从变结构理论的角度，应用边界层滑动控制理论设计了一个模糊滑动控制器。
Robust sliding surface is designed by optimizing pole assignment, and the corresponding sliding mode controller connected is set up.
通过优化极点配置，设计了鲁棒滑面和相应的滑模控制器。
The second layer is a moving sliding mode controller(MSMC) that can track the calculated reference wheel.
控制系统的第二层是一移动滑模控制器。
The system consists of PLC, fault position controller, fault mode controller, fault Angle controller and fault switch.
该系统由PLC可编程控制器、故障点选择器、故障形态选择器、合闸角控制器和故障开关组成。
This paper discusses how to realize the controlling process by combining micro-processing technology with new mode controller under the traditional controlling mode.
该文探讨了在传统的控制模式下，如何运用结合了微处理器技术的新模式控制器来实现控制要求；
Integrating fuzzy logic control and sliding mode control, a new design method of fuzzy sliding mode controller is introduced.
将模糊逻辑控制与滑模控制相结合，给出了一种模糊滑模控制器的设计方法。
The terminal sliding mode controller is designed by using unit vector style, and it suits the uncertain elements whether it satisfies the matching condition or not.
采用单位向量控制形式的最终滑动模态控制器，对满足匹配条件和不满足匹配条件的不确定性均适用。
In order to provide safety and obtain desired longitudinal vehicle motion, a robust sliding mode controller is designed to maintain the reference input wheel slip.
为了保证制动控制的安全性和获得期望的纵向运动，设计鲁棒滑模控制器来跟踪给定的参考滑移率输入。
A fuzzy sliding mode controller is introduced and designed for an indirect vector control AC speed regulating system.
针对滑差频率型矢量控制交流调速系统，提出并设计了一种模糊滑模控制器。
Both sliding mode controller and PID controller are designed to realize adaptive regulation of throttle opening and ignition timing respectively.
设计了滑模控制器和PID控制器分别对节气门开度和点火时刻进行自适应调节。
Then the fuzzy sliding-mode controller with exponential approach law is designed.
在此基础上设计满足指数趋近律的模糊滑模控制器。
A dynamic sliding mode controller is devised to achieve output tracking of the mobile manipulator that consists of a mobile platform which has two driving wheels and a two-link manipulator arm.
本文针对由二轮驱动的移动平台和二连杆机械臂组成的移动机械臂的输出跟踪问题，利用滑模控制原理为其设计了动态滑模控制器。
This paper researches the design of sliding-mode controller and stability problem for networked control systems with network-induced delay is studied.
研究具有网络诱导时延的网络控制系统滑模控制器设计及稳定性分析问题。
Sliding mode controller of variable structure has been gradually applied in the electric drives because of its robust and easy realization.
滑模变结构控制器由于具有鲁棒性好、设计实现方便等优点，已被逐步应用于电力传动控制领域。
A dynamical sliding-mode controller is devised to track the output of mobile manipulators.
为实现移动机械臂的输出跟踪控制，设计了一种动态滑模控制器。
The simulation results show that sliding mode controller has strong robustness in suppressing parameter variation and exterior disturbance.
抑制系统参数变化和外部扰动的能力显著增强，充分体现了滑模控制的强鲁棒性。
Variable structure sliding mode controller has been applied gradually in the electric drives because of its advantage of robust and easy realization.
滑模变结构控制器由于具有响应快、鲁棒性好、设计实现方便等优点，已被逐步应用于电力传动控制领域。
A robust control scheme on the model of surface permanent magnet synchronous motor, composing of a sliding-mode controller and a sliding-mode observer, was presented in this paper.
基于表面式永磁同步电机在二相坐标下的数学模型，采用滑模变结构方法设计了由滑模控制器和扩展滑模观测器组成的鲁棒控制系统。
The sliding mode controller is a robust controller and it is used to diminish the track error of the control system.
滑模控制器用来减小系统的跟踪误差，起鲁棒控制作用。
First, according to the tracking error dynamics and kinematics described by unit quaternion error and angular velocity error, a sliding mode controller is derived based on Lyapunov theory.
首先根据由误差四元数和误差角速度描述的跟踪误差动力学和运动学方程，设计了基于李亚普诺夫方法的滑模变结构控制律。
The control value is divided into a hitting control law and an equivalent control law according to the moving characters of the sliding mode controller.
该控制器根据滑模变结构控制器的特点，将控制律分为等效控制律和到达控制律。
The control value is divided into a hitting control law and an equivalent control law according to the moving characters of the sliding mode controller.
该控制器根据滑模变结构控制器的特点，将控制律分为等效控制律和到达控制律。
应用推荐