The node hardware circuit design, PCB making and a number of anti-interference measures taken in the high-frequency mixed circuits is described in detail in the paper.
论文对节点硬件电路原理、设计方法、PCB制做以及数模混合高频电路中的抗干扰措施进行了深入研究。
Through hole components welding using traditional manual welding or soldering. The circuit board surface mount components and through-hole components mixed together.
传统的通孔元件的焊接采用波峰焊或手工焊接。目前电路板上表面贴装元件和通孔元件混合在一起。
A low power design in system level using current steering architecture, which can be applied to the system of CMOS mixed signal circuit widely, is presented.
提出了一种系统级电流使能控制结构，可广泛地应用在CMOS数模混合电路中，用于实现系统级的低功耗设计。
This paper describes a circuit design for humidity measurement and control using mixed signal.
提出了一种运用混合信号的湿度测控电路的设计方案。
The experimental results show that the circuit can generate typical impulse noise, white noise and mixed noise that has wide applying value in the study of signal processing.
实验结果表明，这种电路能产生典型的冲击干扰、白噪声以及在信号处理研究中很有实用价值的混和噪声。
RTD-based circuits have important applications in digital circuit, mixed signal circuit and optoelectronic system with the characteristics of ultra-high speed, low power and self-latching.
RTD基集成电路所具有的超高速、低功耗和自锁存的特性，使其在数字电路、混合信号电路以及光电子系统中有着重要的应用。
Shanghai Natlinear Electronics Co. Ltd. focuses on the design and research on Analog and Mixed-Signal integrated circuit.
上海南麟电子有限公司，专注于模拟与数模混合类集成电路的设计与研究。
By making use of the quantum canonic ensemble theory, the quantum fluctuations of a mesoscopic RLC circuit in the mixed state have been studied.
利用量子正则系综理论研究了介观rlc电路在混合态下的量子涨落。
The tool may generate fabrication masks for the given design that include mixed gate transistors with threshold voltages optimized to meet circuit design criteria.
该工具可以产生用于特定设计的制造掩模，该设计包括具有优化的阈值电压的混合栅极晶体管以符合电路设计标准。
This paper also discusses a circuit parameter estimate method based on mixed-signal circuit performance analysis.
本文给出了一种基于混合电路性能分析的电路参数估计的方法。
A mixed technology circuit is also described.
还公开了一种混合技术电路。
The transceiver interface circuit in this dissertation is the most important part of USB2.0 interface which is a high speed mixed signal circuit.
本文物理层接口电路是USB2.0接口芯片中的最关键的高速模拟与混合信号电路。
The circuit is the medium scale digital and analog mixed integrated circuit.
该电路为中规模数模混合集成电路。
The control mode of mixed loop of heat-supply secondary circuit and the design key points of the control system are introduced.
介绍了供热二级管网混合回路的控制方式及控制系统的设计要点。
On an analog and digital mixed print circuit board, the digital simultaneous-switching noise may bother the sensitive analog circuit.
在数模混合布板时，数字电路的同步开关噪声往往会影响敏感的模拟电路。
Using transient traveling waves generated by fault to locate single-phase earth fault or short circuit fault in distribution feeders mixed with overhead lines and cables is proposed.
该文提出利用线路故障产生的暂态行波实现配电架空线、电缆混合线路单相接地及相间短路故障测距，分析了故障初始行波模分量的暂态特征。
The whole chip includes about 900 transistors and is a mixed small scale application specific integrated circuit chip.
整个芯片大约有九百个管位，是一块小规模的数模混合专用集成电路芯片。
The new design methodology for complex digital module in mixed signal circuit realizes a real design automation.
全新的混合信号中的复杂数字模块的设计方法，实现了设计真正的自动化。
Duties: Responsible to circuit analysis upon analog and mixed-signal ICs.
职责：负责片上系统的电路分析。
Moreover, in IDDT diagnosis, the conception of fault feature curve and feature space is proposed to diagnose the fault in the analog and mixed-signal circuit.
此外，对动态电流故障诊断算法提出特征空间和特征曲线的概念，以实现对动态电流信号中的故障信息的有效提取。
The open circuit voltage of the cell under dynamic operating is higher than that under steady state owe to the reduction of mixed potential caused by methanol crossover.
动态负载时电池的开路电压要比稳态运行时的高，主要原因是因甲醇窜流造成的过电势的减少。
Aiming at the mixed-signal circuit testing, an integrated built-in self test (BIST) architecture for testing on-chip high speed ADC was presented.
针对混合信号电路的测试问题，提出了一种内建自测试(BIST)结构，分析并给出了如何利用该结构来计算片上高速模数转换器(adc)的静态参数。
Operational amplifier is widely used in all kinds of analog and mixed-signal circuit. There are many differences of focused performance because it is applied for differential circuit.
运算放大器广泛应用于各种模拟电路、数模混合电路中，而由于各自所用的目标电路不同侧重的指标也有差别。
In real optic fiber circuit, signal will be often mixed with noises. During fault analysis, it's necessary to find event information from the noise, and accurately judge position of event points.
实际光纤线路的信号中常常混有噪声，在故障分析中必须将事件点信息从噪声中提取出来，再精确地判断出事件点的位置。
The pyrolytic tar, gas and solid were obtained by pyrolysising of waste printed circuit boards mixed with CaCO3.
废旧电路板中的树脂与碳酸钙共同加热，获得气体、固体和热解油3种热解产物。
This method can improve the efficiency and accuracy of the analog and mixed-signal circuit testing.
该方法改进了测试的效率，提高了测试的正确性。
In a definite temperature, the system will be in a mixed state, further, we obtain the quantum fluctuations in mesoscopic LC circuit with a power source in a finite temperature.
在确定的温度下，系统将处在混合态，进一步得到有限温度下含源介观LC电路的量子涨落。
The circuit design is based on the principle of the tradition DLL in mixed-mode.
该电路设计是基于延时锁定环(dll)原理上，采用混合信号电路设计方案来实现。
Because many of circuit board under test are mixed-signal type, the diagnostics database, which is the core of the software, is built by a method, namely Discrete Event Systems theory.
针对待测电路板许多属于数模混合类型，作为软件核心部分的测试诊断数据库的建立采用了离散事件系统法。
Because many of circuit board under test are mixed-signal type, the diagnostics database, which is the core of the software, is built by a method, namely Discrete Event Systems theory.
针对待测电路板许多属于数模混合类型，作为软件核心部分的测试诊断数据库的建立采用了离散事件系统法。
应用推荐