The technology of rotating mirror beam coupling and splitting is also studied.
本文还研究了用于激光导星的高速转镜耦合分光技术。
This technique makes use of a small flexible mirror placed in the beam of a telescope.
这项技术利用了放置在望远镜光束上的一个小的可弯曲的镜子。
To make it, they shone a right-handed green laser beam at a mirror and let it interact with the left-handed reflection.
为了形成这种光束，他们将一束右手性绿色激光束照射在反射镜上，并使原光束与其反射的左手性光束相互作用。
And then we have a laser beam which we shine onto the mirror.
有一道激光束，照到镜子上。
Influence of position of output mirror on beam of two rod solid state laser has been analysed by means of matrix optics and experiment.
采用矩阵光学理论和实验相结合的方法，分析了输出镜对双棒串接固体激光器输出光束的影响。
Photoetching device, mirror element, device producing method and beam transfering system.
光刻装置，镜元件，器件制造方法，及束传送系统。
A large aperture laser beam scanning method by combining microlens arrays with rotating mirror is put forward.
提出微透镜阵列与转镜相结合的大口径激光光束扫描方法。
The Angle of rotation, which provides a measure of the current flowing in the coil, is measured by the movement of the needle or by the deflection of a Beam of light reflected from the mirror.
旋转角度可用来度量线圈内通过的电流，角度用指针的转动或镜面反射光线的偏转来测定。
The Michelson interferometer system which has two-beam interference is applied in Fourier Transform interferometer, the moving mirror could tilt in three directions in motion.
采用了双光束干涉的迈克尔逊干涉仪系统的傅里叶变换红外光谱仪，在动镜运动过程中，动镜可能在三个方向发生倾斜。
Laser rotating mirror scans the focused laser beam into lineation facula.
激光转镜以扫描方式将激光束聚焦扫描成线状光斑。
A submillimeter wave (SMMW) beam field distribution automatic measurement system using a scanning mirror with microcomputer control has been built and studied.
研究一种采用反射镜扫描方法由微机控制的亚毫米波场分布自动测量系统。
Imported optical mirror, reduce wastage of laser power, high quality of light beam.
进口光学激光镜片组，激光功率光损耗低，光束质量好。
For beam passing through cavity mirror twice in multi-pass amplifier laser facility, deformable mirror is often applied at location of cavity mirror for the goal of improving correction range.
在多程放大系统中，激光一般要经过腔反射镜两次，将变形镜置于腔反射镜位置能够有效提高其校正量。
The experimental results showed that good beam quality was obtained with a hybrid unstable resonator in which useful output energy was obtained by transmission through a partially transparent mirror.
实验结果表明对于高增益的准分子激光，采用部份透射镜作耦合输出的混合型非稳腔可以使准分子激光的发散角减小到毫弧度量级。
This resonator is composed of a helical reflecting mirror and a spherical reflecting mirror. The single laser beam can be effectively extracted.
该谐振腔由一螺旋面反射镜和一球面反射镜构成，可充分提取激活区的能量并输出单束激光。
For resonators with random disturbed phase mirror, its modes are partially coherent, and there also exists a suitable parameter to get flat top beam.
对随机微扰型位相片，输出模式是部分相干的，在合适参数下，也可得到平顶光束。
In a beam transmission system of a CO2 laser, the reflection mirror can be used as back-view mirror or foldable reflection mirror in the laser cavity, while as a light bender outside the cavity.
在CO2激光器的光束传输系统中，反射镜在激光管腔内被用作尾镜和折叠式反射镜，而在腔外则充当了弯光器的角色。
This invention is related to an image forming device including an optical scanning device which is able to adjust the irradiation from a beam to a vibrating mirror in a simpler means.
本发明涉及一种包含能够以更简单的方式调整光束对振动镜照射的光扫描装置的图像形成装置。
It is necessary for calculating the solar beam radiation on the tilted mirror or aperture for designing of solar thermal utilization.
在聚光太阳能热利用设计时，有必要计算聚光装置倾斜镜面或孔径表面的太阳直接辐射。
Laser beam misalignment with scanner mirror is one of the error sources influencing the accuracy of airborne LIDAR.
激光束与扫描镜对准误差是影响机载LIDAR定位精度的因素之一。
After reflection at the point p, the beam of light travels towards the polished floor and reflects off it as if the floor is a mirror.
在p点的映像之后，光的光束对于被擦亮的地板传播并反映出好象地板也是一面镜子。
The simulation shows that the first mode frequency for performance is near 1000Hz, which is much lower than that of the second mode. The displacement of mirror is caused by the torsion of beam.
模拟结果表明，该微动作器的第一模态频率远低于第二模态，镜子的位移由梁的扭转引起。
It is found that there exist "amplification" and "self-compensation" of beam spread in the reflection from a mirror and a corner cube reflector, respectively.
证实了平面镜反射光束的扩展存在放大效应，角反射器反射光束的扩展存在自补偿效应。
Much attention is payed to the uniformity of pump beam in different condensing cavities. The output energy and pulse width are tested with different output mirror transmission.
重点研究了不同聚光腔的泵浦光场均匀性，同时在使用不同透过率输出镜时对激光输出能量和脉宽进行了测试。
When the angle of incidence is 45 degrees, the beam-combination mirror is designed to transmit long wavelength laser beams and the diode beams reflected at 90 degrees will be used to calibrate it.
合束镜设计用于45度入射时，传输长波的激光束，并利用90度反射的二激光光束来校准它。
The ideal application of beam-combination mirror is to be used in the calibration system of laser diode.
合束镜理想的应用在利用激光二极管做校准的系统中。
The X-ray multilayer mirror for longer wavelength fabricated with ion-beam-sputtering deposition instrument OXFORD, is introduced in this paper.
叙述用离子束溅射镀膜机OXFORD进行X射线长波段多层膜实验及制备X射线多层膜光学元件方面的工作。
The X-ray multilayer mirror for longer wavelength fabricated with ion-beam-sputtering deposition instrument OXFORD, is introduced in this paper.
叙述用离子束溅射镀膜机OXFORD进行X射线长波段多层膜实验及制备X射线多层膜光学元件方面的工作。
应用推荐