The value of the minimum stress is one of the most important parameters in hydraulic fracturing.
最小应力值是水力压裂最重要的参数之一。
Either the maximum and minimum stresses of one of these and the mean stress-are required to specify the fluctuation.
最大应力和最小应力或二者之一和平均应力，以确定其起伏程度。
The effective stress of specimen is inhomogeneous. As the strain rate increases, the minimum stress value moves from the drum-shaped region to the heart of specimen.
试样内部各部位的应力大小分布不均匀，随应变速率的增大，最小应力值由自由变形的鼓形区域逐步向心部移动；
The regulatory minimum set by Europe's Capital Requirement Directive (CRD) is 4%, while the 6% standard was in line with the benchmark used in last year's US stress test.
欧洲资本要求指令（CRD）设定的最低监管要求为4%，6%的标准与去年美国压力测试中的基准相符。
Exceptions include sections with a minimum dimension 1, 0 m or where the stress is not greater than 80% of the design ultimate strength.
例外情况包括有最小尺寸为1.0米或在压力不大于80%的设计强度极限部分。
The Mohr-Coulomb model is based on plotting Mohr's circle for states of stress at failure in the plane of the maximum and minimum principal stresses.
莫尔-库仑模式基于莫尔圆来判断最大和最小主应力平面上的破坏应力状态。
Proposed is a new method to calculate the maximum and minimum horizontal stress using log data.
提出了一种利用测井资料计算最小和最大水平应力剖面的新方法。
Topology optimization design of minimum weight cantilever trusses subjected to stress constraints is studied.
研究了应力约束下最小重量悬臂梁桁架结构的拓扑优化设计。
In the multilayer welding process, the method of symmetry welding gets the minimum residual tensile stress.
在多层焊的过程中，采用对称施焊的方法得到的焊接残余拉应力峰值是最小的。
We have been able to confirm that average, minimum and maximum values for die strength could be improved compared with die that underwent the conventional stress relief.
我们已能够通过比较经历过常规应力解除芯片来确认被改进芯片强度的平均、最小、最大值。
Integrating the minimum principal stress principle, the re-fracturing crack azimuth is determined.
再结合最小主应力原理，确定重复压裂裂缝方位。
A few methods, which approximately calculate minimum relative bending radius, are put forward by analyzing the stress and strain as plate bending deformation in this paper.
通过对板料弯曲变形应力应变分析，提出了几种近似计算最小相对弯曲半径的方法。
The orientation of the induced hydrofractures arc controlled by the mutually perpendicular orientations of the maximum and minimum principal stress components of in situ stress field.
人工裂隙的方向受地应力场中两个相互垂直的主应力分量—最大主应力和最小主应力的制约。
The direction of longest echo time is the direction of minimum earth stress, and the direction of greatest earth stress is perpendicular to it.
回波时间最长的方向为最小地应力方向，最大地应力方向与之垂直。
By this method, it is capable for calculating the initial rock stress, i. e., vertical stress, average horizontal stress, maximum and minimum horizontal stress, in any depth below surface.
该方法弥补了以往各向同性球壳模型的不足，可计算出任意深度的原岩应力状态：铅垂应力、平均水平应力、水平面内最大及最小正应力。
To balance the stress, I would work out at the gym a minimum of two hours a day, seven days a week.
为了缓解压力，我会去健身房至少锻炼两个小时，一周七天，一天不落。
An example shows that the long axis of the casing pressure figure directs to the minimum principal compression stress.
应用实例表明，套管径向压力载荷图形的长轴指向地应力场的最小主压应力方向。
The optimal shape among these five cross sections is determined by the criteria of minimum tangential stress 'absolute value and the minimum plastic area.
并分别以孔边最大的切向应力(绝对值)最小和塑性区面积最小为准则对五种断面进行了优选。
The maximum and the minimum horizontal stresses and the direction of the maximum horizontal stress are obtained.
取得了该区最大水平主应力、最小水平主应力量值及最大水平主应力方向。
This principle, which is an extension of the principle that the maximum synthetic working stress is minimum, shows that the elastic working range of the bowl is maximum.
该条件表示转鼓在工作时弹性工作范围最大，它是最大合成工作应力最小原则的一个推广。
According to the rules of the stress distribution, the maximum deformation of diaphragm spring and the minimum number of forced compression needed are proposed.
根据膜片弹簧工作过程中应力分布及变化规律，得到了强压时膜片弹簧变形量数值和强压所需次数。
Finally, based on the stress fields of FEM analysis, the most dangerous sliding mode and the minimum anti-sliding factor are searched by parallel recombination simulated annealing algorithm.
最后基于该方法计算的应力场，应用并行组合模拟退火算法搜索坝基最危险滑动模式及相应的最小安全系数。
Two kinds of heat simulated specimens of fusion line are made that their resistance to H2S stress corrosion is proved to be the minimum.
作了两种熔合线部位的热模拟试件，证明其抗h_2s应力腐蚀性能最差。
Testing problems include a minimum weight design of a triangular wing structure under displacement, stress and size constraints.
算例中包括了一个三角形机翼受应力、变位和尺寸等约束的最轻重量设计。
This paper presents a minimum weight design method of structures with multi frequency, displacement and stress constraints.
本文给出了具有多个频率、位移和应力约束的结构最轻重量设计。
On the basis of the static and dynamic stress analysis about the traveling mechanism, the minimum suction parameter of the single magnetic adsorbing block was determined.
在对移动机构的静态和动态进行受力分析的基础上，确定了单个磁性吸附块的最小吸力参数。
In this paper, based on the variational principle of minimum complementary energy, the method of minimum complementary energy is put forward in calculating structure dynamic stress.
本文以最小余能原理为基础，提出了计算结构动态应力的最小余能法。
In Europe, guaranteed minimum returns arise partly from regulation and partly from competition and have recently been a source of stress.
在欧洲，有保证的最低利润上升的原因，部分是由于规定、部分是由于竞争造成的结果，而且最近已经成为一种压力来源。
On the other side, the proposed method can also consider the influence of the change of stress fields and pore pressure field on the minimum factor of safety by the finite element analysis.
同时，本方法利用有限元法分析的应力和孔隙水压力结果，按有效应力法计算边坡安全系数，可分析施工过程中应力和孔隙水压力变化对边坡最小安全系数的影响。
On the other side, the proposed method can also consider the influence of the change of stress fields and pore pressure field on the minimum factor of safety by the finite element analysis.
同时，本方法利用有限元法分析的应力和孔隙水压力结果，按有效应力法计算边坡安全系数，可分析施工过程中应力和孔隙水压力变化对边坡最小安全系数的影响。
应用推荐