The microstructure analysis shown that the integrating state of interface between graphite and metal is good.
微观结构分析结果表明，金属-石墨界面结合状态良好，石墨分布均匀。
Tensile testing, fracture analysis, microstructure analysis, hardness test were carried out on the welded joint.
对焊接接头进行了拉伸强度测试、断口分析、金相组织分析、显微硬度分析。
The Pb brass has been treated with cryogenic treatment, the mechanical properties testing and microstructure analysis have been done.
对铅黄铜作了深冷处理，并进行力学性能试验和金相组织分析。
Through the microstructure analysis and residual stress measurement on a quenching test-piece, the feasibility of the numerical simulation is proved.
通过对淬火试件进行金相组织分析和残余应力测量，验证了数值模拟的可行性。
Causes to the laminar defect of the umbrella bone steel occurring in the process of cold forming are analyzed by chemical analysis and microstructure analysis.
采用化学分析及微观组织分析的方法，对伞骨钢压扁后成型过程中所产生分层缺陷的原因进行分析。
By microstructure analysis the evolutive characteristic of structure of rapidly solidified Cu Zn alloy in different temperature preservation was initially made clear.
通过金相组织分析，初步摸清铜锌合金快速凝固组织在不同温度下保温组织演变的特点。
According to microstructure analysis, cracks in bolster and side frame produced by Furan self-cured sand can be classified into shrinkage hot cracks and stress hot cracks.
显微组织分析表明，呋喃树脂砂生产摇枕、侧架所出现的裂纹按照产生原因分为缩裂纹和拉裂纹。
The paper introduces a method and its principle which is based on magnetic property of alloy and used for alloy microstructure analysis semi-quantitatively or quantitatively.
介绍了一种根据合金的磁性能半定量、定量地分析合金组织状态的原理和方法。
The welding process of converter ring was studied. By means of tensile and impact test, fractures and microstructure analysis, the evaluation of the welding process was made.
研究了转炉托圈的焊接工艺，结合拉伸试验、冲击试验、断口和金相组织分析，进行了焊接工艺的评定。
In microstructure analysis, the use of advanced equipments is emphasized, and the LABS are capable of conducting atom structure analysis and nano-precipitation phase analysis.
显微组织分析，侧重于先进分析仪器的应用，具备原子像结构分析、纳米级析出相的分析能力。
The microstructure analysis by SEM showed that the precipitation of netlike proeutectoid carbide has been inhibited during air cooling after forging due to Al addition to the UHCs.
扫描电镜观察表明，加入铝，可抑制锻后空冷条件下先共析网状碳化物的析出；
The accurate measurements of local micro-stress and strain in ultra deep sub-micron semiconductor structures usually resort to complicated microstructure analysis, measurement methods.
超深亚微米半导体结构中的局域微应力、应变的精确测量通常必须借助复杂的微结构分析、测量手段。
The microstructure analysis of the butterfly wing's squamae with structure color properties shows that the specific bio-tissue is patterned with 2d ordered periodic dielectric changes.
对具有结构反光性质蝴蝶鳞片的微观结构分析证实特殊生物组织体可以构成具有反光作用的二维有序结构。
The fracture reason of reducer shaft was analyzed by means of morphology and microstructure analysis, chemical composition analysis, mechanical properties test, SEM micro-morphology analysis.
采用宏微观形貌分析、化学成分分析、力学性能测试、SEM微观形貌分析等手段，分析了减速机轴断裂的原因。
Microstructure analysis to the double sided superconducting films was also performed.
同时对双面超导薄膜进行了微结构分析。
Microstructure analysis by FE-SEM indicated that the ha particles were rod and columnar, some of the powder agglomerating.
FE -SEM显微结构研究表明样品中HA颗粒形貌为棒状和圆柱状，有部分团聚现象。
Microstructure analysis is a significant and effective method in the study of structure and technology of ancient porcelains.
显微结构分析是古陶瓷结构和工艺研究的重要而有效的方法。
Microstructure analysis results showed that, in the condition of rapid solidification, the second phase morphology of monotectic alloys transited from rods into particles.
对合金的显微结构分析结果表明，在快速凝固条件下，偏晶合金中的第二相形态从带条状转变为颗粒状。
Microstructure analysis results showed that, in the condition of rapid solidification, the second phase morphology of monotectic alloys transited from rods into particles.
对合金的显微结构分析结果表明，在快速凝固条件下，偏晶合金中的第二相形态从带条状转变为颗粒状。
应用推荐