Automatic focusing is a key technique in an automatic control microscope system.
自动聚焦技术是全自动控制显微镜系统中的核心部分。
The hardware of system includes microscope system, digital camera and 3d automatic objective table.
系统的硬件构成，主要有显微镜成像系统、数字摄像机、三维自动载物台。
This thesis describes the design of autofocusing implementation for CCD measuring microscope system.
本文对CCD尺寸参量通用检测系统中自动调焦的方法进行了深入的研究。
Image resolution is one of importance parameters on image quality evaluation in Optoelectronic microscope system.
光电显微仪成像质量评价各项指标中系统成像分辨率仍然是重要指标之一。
Conclusions Contact TV - microscope system can be used to evaluate obese degree and treatment effect on weight reducing.
结论接触式显微电视系统可作为衡量肥胖程度及减肥疗效的观察工具。
Discussed the optical imaging principle of the digital microscope system and the laser scanning confocal microscope system.
讨论了数码显微镜系统及激光扫描共聚焦显微镜系统的光学原理。
This paper has designed and optimized an integrated digital microscope system, which can realize both auto-focusing and real time fusion.
论文设计并优化了一套完整的集自动对焦和实时融合功能为一体的数码显微镜系统。
In this paper 3-d reconstruction of three kinds of visual microstructures by means of a confocal laser scan microscope system is introduced.
本文介绍利用共聚焦激光扫描显微镜系统进行的三种动物视觉显微结构的三维重建。
In this paper, the principle of a confocal laser scan microscope system and its advantages compared with conventional microscope are introduced.
本文介绍了共聚焦激光扫描显微镜系统的工作原理及其优良性能。
The total positive rate of the super microscope system was higher than that of the conventional microscopic, and the difference was statistically significant(P<0.05).
超高倍显微系统总阳性检出率明显高于常规显微镜，差异有统计学意义（P<0.05）。
Choosing auto focusing evaluation function for images is a key factor for passive auto focusing system of automatic microscope.
图像自动聚焦评价函数的选择是全自动控制显微镜无源方式自动聚焦系统的关键问题。
This kind of scanner has been used in the system of scanning near field optical microscope.
这种扫描器被用于扫描近场光学显微镜探测系统中。
The observation under microscope showed that the rhizobia were present in percycle cells of vascular system of the tobacco hairy roots and in cortex cells and intercellular spaces of rice roots.
显微镜观察表明在烟草发根的维管束中柱鞘细胞、水稻根皮层细胞内和细胞间隙有根瘤菌存在。
A typical nanostructured titania super hydrophilic film was chosen for general characterization employing a Scanning Probe Microscope (SPM) and an electrochemical measurement system.
选用典型的二氧化钛纳米超亲水薄膜，用扫描探针显微镜(SPM)和电化学测试系统进行一般性的表征。
Using the computer multimedia technology and fluorescence microscope, we established the pathology organization analysis and the living cell fluorescence trace system.
采用电脑多媒体技术配合荧光显微镜，建立了病理组织分析及活细胞荧光示踪系统。
This system not only remedied the function defects of the traditional fluorescence microscope, but also realized the computer control and the process and spectral analysis of the fluorescence image.
本系统不仅弥补了传统荧光显微镜的功能缺陷，而且实现了系统的计算机控制及荧光图像的处理、光谱分析等功能。
Based on this principle, a method is described in this paper of measuring OTF of an optical system by means of scanning photometric microscope eyepices.
基于这一原理，我们研究了一种使用扫描显微镜和微计算机测量光学传递函数的方法。
The paper simply introduces the evacuation system for model H-600 electron microscope and analyzes the program of evacuation and the program control circuit.
文章简要介绍了日立h- 600型电子显微镜抽真空系统，分析了抽真空程序及其程序控制电路。
According to the characteristic of operation microscope, a decorative coating system was confirmed.
根据手术显微镜的特点确定了其装饰性涂装体系。
The system chiefly consists of a confocal microscope, a CCD camera, testing stages, image grab card and a computer.
该系统主要由同轴显微镜、CCD摄像头、检测平台、图像采集卡和计算机组成。
The orientation system for microscope worktable based on AT89C52 chip microcomputer is designed.
设计了一套基于AT 89 C52单片机的显微镜工作台定位系统。
Based on the traditional optical microscope, digital image system were developed applying digital technology.
应用数字技术，在传统光学显微镜基础上研制了数字图像系统。
Morphology and growth curve of MSCs: The growth of cells were observed by phase contrast microscope (OLYMPUS CK40), and digital imaging system (OLYMPUS DP50) was applied to record.
间充质干细胞的形态学和生长曲线：在相差显微镜(OLYMPUSCK40)下观察细胞生长状况，数码成像系统(olympusDP50)摄像记录。
Based on the image processing technology, an auto-focusing system consisted of optical microscope, CCD, moment motor and drive gear etc, was presented.
介绍了一个基于图像处理的自动调焦系统，该系统由光学显微镜、CCD、力矩电机和齿轮传动机构等组成。
The transducer-focusing system is the most important part in a scanning acoustic microscope.
声学换能与聚焦系统是扫描声学显微镜的主要部件。
Methods we constructed an optical tweezers which consists of a Laser, a microscope, a CCD camera and computer image processing system, and manipulated some cells with the tweezers.
方法利用激光陷阱技术，用激光器、生物显微镜、CCD传感器和计算机图像处理系统构成一套光镊来进行操纵。
Microscope CCD imaging system and imaging transaction technology which implement automatic follow and orientation for jointing.
采用显微CCD成像系统、图像处理技术，可实现焊接自动跟踪、定位。
Expatiate to the debugging and operation method of microscope lighting system in different microscopy. Discussion on the idiographic operation and management methods in using microscope.
阐述了不同显微镜检术中显微镜照明光路系统的调试和使用方法。提出了显微镜使用时的具体操作方法和管理保养措施。
Expatiate to the debugging and operation method of microscope lighting system in different microscopy. Discussion on the idiographic operation and management methods in using microscope.
阐述了不同显微镜检术中显微镜照明光路系统的调试和使用方法。提出了显微镜使用时的具体操作方法和管理保养措施。
应用推荐