The micropore content was measured by mercury porosimeter.
用压汞法测定了拉伸丝的微孔含量。
The pore categoryincludes micropore, intergranular pore and dissolved pore.
孔隙类型包括微孔、粒间孔和溶孔。
The difference of quality, parameters of pore throat, and so on results of the micropore structure.
储层物性参数的差异、孔喉特征参数的差异等，均归因于微观孔隙结构的差异。
According to the microstructure, the saturated adsorption amount of micropore inorganic material is 73.47%.
该模型中微孔无机材料对相变工质材料的理论饱和吸附量为73.47％。
The influences of pressure on the fractal dimension and the structure of micropore are discussed in details.
详细讨论了分形维数和微孔结构随压力的变化规律。
The adsorption principle of ACFP is micropore volume filling according to Nitrogen adsorption isotherm plot.
通过对ACF与ACFP的氮气吸附等温线的分析，表明ACFP的吸附机理仍然是微孔体积填充。
As a result of the expansion of micropore in zeolites, the desorption isotherm is different from the adsorption isotherm.
由于沸石微孔扩张，脱附等温线与原先的吸附等温线有所不同。
Dust collector is designed to separate superfine particle or even sub-micron dust from process gas with micropore fiber material.
过滤除尘器是利用微孔超细纤维滤布分离气体和微细粉尘，乃至亚微米尘埃的主要设备。
At first, we produced the polyethylene microporous hollow fiber membrane by ascending melting filature and made micropore by drawing.
首先，用向上熔融纺丝和拉伸致孔法制得聚乙烯中空纤维膜。
The second and third fractions were mesopore and micropore diffusion respectively, and the intraparticle diffusion was the control step.
第二和第三阶段分别是中孔和微孔扩散过程，颗粒内扩散为速率控制步骤。
Furthermore, the micropore in DP steel would change into microcrack when martensite volume fraction reached 30%. Meanwhile necking appeared early.
断裂时当马氏体体积分数增加到30%，颈缩提前，且微孔有向微裂纹转变的趋势。
There are micropore and mesopore in mesoporous hollow sphere, which give it potential applications in many fields as a new kind of functional material.
介孔空心微球具有大的空心腔体和壳体上小的介孔结构，使得介孔空心微球结构材料作为一种新型功能材料有着广阔的应用前景。
The effect of diluent(mineral oil)viscosity on the micropore structure of HDPE microporous film via thermally-induced phase separation was studied with SEM.
采用扫描电镜（SEM）研究了稀释剂（矿物油）粘度对热诱导相分离高密度聚乙烯（HDPE）微孔膜微孔结构的影响。
The invention discloses a foamed micropore layer of artificial leather for lining of PE shoes and a method for preparing artificial leather by using the same.
本发明公开了一种PE-鞋用衬里人造革发泡微孔层及其利用发泡微孔层制备人造革的方法。
Using natural forsterite and magnesite clinker as raw materials, the forsterite refractories with micropore and high strength has been prepared by foaming method.
以镁橄榄石和镁砂为主要原料，粘土为结合剂，利用泡沫法制备了微孔、高强度的镁橄榄石制品。
The utility model has advantages of high intensity of the micropore structure, being not easy to deform, be jammed and corrode and good anti-shocking performance;
具有微孔结构强度高、不易变形，不易堵塞，不易锈蚀，抗震性能好；
Results indicated that activation temperature, temperature holding time and activation agent ratio determined the depth of activation and the micropore distribution.
实验结果表明，活化剂用量、活化温度和活化时间都决定着活化反应的深度。
Trichloroaniline in the air was collected with micropore filter membrane and desorbed with cyclohexane, separated with a column OV-17:OV-210 and determined by GC-ECD.
空气中三氯苯胺用微孔滤膜采集，环已烷解吸，经OV- 17和OV- 2 10混合色谱柱分离，电子捕获检测器检测测定。
It was showed that iron had no obvious influence on the distribution of micropore, while it made the specific surface area and pore volume of micropore decrease slightly.
结果表明，铁的存在对活性炭的微孔分布没有明显影响，但却使活性炭微孔的比表面积和孔容有所下降。
The relationship between surface characteristics, micropore structure and minerals structure, chemical components as well as processing technologies and properties is discussed.
初步讨论矿物表面特征、微孔结构与矿物晶体结构、化学成分以及加工工艺、性能之间的联系。
The nitrogen and water adsorption isotherms and XPS of two activated carbon fibers (ACF) are determined. The micropore structures and surface properties of ACF are investigated.
测定了两种活性炭纤维(acf)的氮气、水吸附等温线和XPS，研究了ACF的微孔结构和表面性质。
The characterization methods for the microstructure, including micropore structure, surface morphology and topography of carbon molecular sieves (CMS), were reviewed in this paper.
综述了国内外表征碳分子筛(CMS)微结构包括微孔结构、表面形态与形貌的主要方法。
The results show that the adsorption capacity and adsorption speed of PACF are higher than that of AC because of its high specific surface area and extensively micropore structure.
结果表明。由于PACF具有高的比表面积和极为发达的微孔结构，因而比AC具有更高的吸附量与吸附速度。
Compare with current high filling blow film of PE and machine penetrating hole film, it has remarkable difference in principle of forming micropore, process-control and use properties.
这种薄膜与现有的吹塑成型的高填充拉伸pe膜和机械扎孔膜，在形成微孔原理上、工艺控制上和使用性能上有着显著区别。
BG 6# blast furnace bosh area had been broken out , the bosh inner used the high thermal conduction and plumbago carbon brick replace the micropore carbon brick, and the results are obviously better.
本钢6#高炉炉腹区域烧穿，炉腹内衬采用高导热、高体密石墨碳砖代替原烧成微孔铝碳砖，实施效果良好。
BG 6# blast furnace bosh area had been broken out , the bosh inner used the high thermal conduction and plumbago carbon brick replace the micropore carbon brick, and the results are obviously better.
本钢6#高炉炉腹区域烧穿，炉腹内衬采用高导热、高体密石墨碳砖代替原烧成微孔铝碳砖，实施效果良好。
应用推荐