Bonding is one of key processes for fabrication of microfluidic chip.
键合是微流控芯片制作的关键技术之一。
A microfluidic chip rapidly identifies pathogens by scanning their genomes.
一个微流控芯片能通过扫描它们的基因组快速地识别病菌。
We used CO2 laser system to fabricate polymethylmethacrylate (PMMA) based microfluidic chip.
提出使用CO2激光器进行PMMA微流控芯片加工的方法。
Objective To establish direct-write laser method for micromachining immunoassay microfluidic chip.
目的建立微流控芯片的CO_2激光直接微加工方法。
An optically controlled microfluidic chip is provided for administering a fluid to a neuronal site.
提供了一种光学控制的微流体芯片，用以控制向神经元位点的流体输送。
The character of microfluidic chip and capillary is analyzed, and UV-Curing technology is expounded.
分析了微流控芯片与毛细管各自特点，并对紫外固化技术进行了阐述。
Diagnostic device: Made using plastic injection molding, this microfluidic chip is inexpensive to produce.
诊断使用的廉价微流芯片诊断设备：用塑料注塑成型该微流控芯片是廉价生产。
The manufactured microfluidic chip by using this process has a short cycle, low costs and a high efficiency.
采用该方法制作的微流控芯片具有生产周期短、成本低、效率高和结构可靠的特点。
The invention relates to a method for detecting bacteria by using the electrochemical impedance principle and a microfluidic chip.
本发明涉及一种应用电化学阻抗原理检测细菌的方法及微流控芯片。
Something like the microfluidic chip he has developing for U. s. Genomics, he says, could be very helpful for studying other biological molecules.
他说，象微流控芯片这样的装置正在美国基因组公司研发，它一定可以对其它的生物大分子的研究大有帮助。
At present, a long period is needed to adjust parameters of microchannel figuration under hot embossing for the fabrication of PMMA microfluidic chip.
目前，PMMA微流控芯片微通道成形过程中热压参数的调整周期很长。
The present work is focused on developing electrokinetic continuous sample introduction systems for microfluidic chip-based capillary electrophoresis.
本论文的研究内容是进行基于电驱动的连续试样引入-芯片毛细管电泳分离分析的研究。
Single long molecules of DNA are then fed into a microfluidic chip, where hydrostatic pressure pulls them at a constant speed through a narrow channel.
然后单独的长的DNA分子被送入微流控芯片，静水压通过一个窄的通道以恒定的速度牵引它们。
Microfluidic chip technology has the preparation of simple, low reagent use, easy to operate, etc. , so in the biochemical analysis of the growing attention.
微流控芯片技术具有制备简单、试剂用量少、操作方便等优点，因此在生化分析中的应用越来越受到重视。
This paper presents a new designed thermal cycling heater system for PCR in microfluidic chip. It includes the power design, the control project and algorithm experiment.
介绍了一种适用于微流控芯片P CR扩增的新型循环加热系统，包括系统可控电源电路设计、控制方案确定及控制算法实验。
The array electrodes were produced by method of photolithography and stripping. and a PDMS-glass microfluidic chip integrating the array of electrodes was bonded efficiently.
采用光刻法和剥离法进行了阵列电极的制作，并成功键合了带有阵列电极的PD MS -玻璃混合微流控芯片。
Miniature function device and interface device are applied to microfluidic chip, which has accelerated the industrialization and commercialization process of microfluidic chip.
微型功能器件以及接口器件在微流控芯片上的应用，加快了微流控芯片实现产业化、商品化的进程。
Moreover research experiments about the microassembly of capillary and microfluidic chip were done, which have proved that the assembly assignment can be finished successfully.
针对毛细管与微流控芯片装配问题作了实验研究，实验验证此自动微装配系统能够成功完成毛细管与微流控芯片的装配任务。
Microfluidic chip may be fractured, deformed and even destroyed in the demolding process, if demolding system is designed improperly or unsuitable process parameters are chosen.
脱模系统设计不合理、工艺参数选择不当都有可能使芯片出现拉断、变形甚至毁坏等缺陷。
Methods To construct direct-write laser micromachining system, set micromachining program, analyse the factor of micromachining, and use the microfluidic chip to detect alpha-fetoprotein.
方法构建激光加工装置，设置激光微加工程序，并时激光加工过程中一些影响因素进行分析，最后将加工后的芯片用于免疫分析。
Miniature function device and interface device are applied to microfluidic chip, which has accelerated the process that the microfluidic chip realizes industrialization and commercializes.
微型功能器件以及对外接口器件在微流控芯片上的应用，加快了微流控芯片实现产业化、商品化的进程。
The hot embossing and bonding machines have been used practically in microfluidic chip automatic fabrication, and the chips have satisfactory quality, precision, repetition and consistency.
塑料微流控芯片热压键合设备已经投入自动化生产，生产的芯片质量、精度、重复性和一致性良好。
In recent years, microfluidic chip has received increasing attention in the field of chemical and biological analysis by characteristics of rapidity, high effectiveness and low consumption.
近年来，微流控芯片凭借快速、高效、低耗等特点，在化学与生物分析领域内，获得了越来越多的关注。
Bonding strength testing results showed that: the strength of PDMS mixture microfluidic chip was greater than 0.82mpa and the strength of the whole PDMS microfluidic chip was about 0.21mpa.
对键合成功的PDMS芯片强度进行测试，结果显示：PD MS混合微流控芯片大于0.82MPa，全pdms微流控芯片的键合强度约为0.21 MPa。
To develop a practical PCR microfluidic chip system, the polymethylmethacrylate (PMMA) based continuous-flow PCR microfluidic chip system and its application technology was researched in this thesis.
为了开发一套实用的PCR微流控芯片系统，本论文对以PMMA（聚甲基丙烯酸甲酯）为基底材料的连续流式PCR微流控芯片系统及其应用技术进行了研究。
A hybrid microfluidic system produced by coupling a microfabricated glass chip with conventional silica capillary for UV absorbance detection was developed.
提出了一种基于芯片-毛细管复合装置的紫外检测-微流控芯片毛细管电泳分析系统。
Kamm and his colleagues first described their microfluidic device in a January 2007 paper in Lab on a Chip.
发表在2007年1月份的芯片实验室杂志上的一篇论文中，卡姆和他的同事首次介绍了该微流体装置。
Kamm and his colleagues first described their microfluidic device in a January 2007 paper in Lab on a Chip.
发表在2007年1月份的芯片实验室杂志上的一篇论文中，卡姆和他的同事首次介绍了该微流体装置。
应用推荐