This paper describes a microcomputer compound control system for single phase resistance-heated furnace based on power and temperature regulations with uniform distribution and zero trigger.
本文介绍一个单相电阻炉均布式零触发调功调温的微机复合控制系统。
Based on the analysis of the theory of vulcanization, the control of rubber vulcanization, the construction of microcomputer control system, hardware and software design were described.
在分析橡胶硫化机理的基础上，阐述了胶料硫化的控制方法、微机控制系统的组成、硬件配置和软件设计。
Based upon the detection of the pouring temperature, and the mould temperature and speed, the process control for centrifugal pipe casting machines is realized by using a microcomputer.
在检测浇注温度、铸型温度和铸型转速的基础上，用微机实现了对离心铸管机的过程控制。
This paper concerns the microcomputer-based real-time control of four-step controlled bridge which works both in the mode of rectifier and inverter.
本文对四段全控桥电路在整流、逆变工况的微机实时控制进行了理论阐述和物理模拟试验。
In this paper, we introduce the principle of metallographical cutter control system and the design method of software and hardware based on the AT89S52 singal-chip microcomputer.
介绍了以AT 89s52单片机为核心的金相切割机控制系统原理和软硬件设计方法。
In this topic, a new CO2 arc welding power source is researched which is based on the technology of microcomputer and wave control.
本课题以波控技术为基本指导思想，应用微机技术，对CO_2弧焊电源控制系统加以研究。
This paper introduces the principles, functions and practical system of a Marine engine monitor based on microcomputer control.
本文介绍用微型计算机控制的船舶机舱集中监督系统的工作原理、功能特点及实际系统。
The principle of microcomputer-based temperature and level control system is given and its operational experience in management and maintenance is introduced.
叙述锅炉温度、水位微机自动控制系统的原理及系统在管理维护方面的运行经验。
This paper introduces a kind of new and practical traffic lights system which is based on single-chip microcomputer control.
介绍了一种新型实用交通灯单片机控制系统的设计方法。
The detector based on virtual instrument is proposed to ensure the control performance of microcomputer control system for diesel locomotive.
为了保证内燃机车微机控制系统的控制性能，提出采用基于虚拟仪器的检测装置。
A design method of microcomputer closed-loop scanning and control system based on grating check is presented.
提出了一种基于光栅检测的单片机闭环扫描控制系统的设计方案。
Based on multi microcomputer, the automatic control system of pipeline all position welding process is developed. The system structure, working principle and software design are described.
建立了基于多微处理器的管道全位置焊接自动控制系统，描述了其系统结构、工作原理和软件设计。
The digital PWM speed controller based on the DC motor PWM speed regulating theory and using a 16 bit microcomputer 80C196KB/KC as the central control chip, was presented.
介绍了以十六位单片机80C196KB/KC作为中心控制芯片，结合直流电机PWM调速原理制成的数字直流PWM调速控制器。
This paper designs a microcomputer control system based of upper and lower structure for pulse electrochemical polishing gear process.
针对齿轮的脉冲电化学光整加工的实际特点 ，设计了一套基于上下位机结构的微机控制系统。
In this paper, the new power source for CO2 short circuiting transfer is researched which is based on the technology of microcomputer and wave control.
本文以波控技术为基本指导思想，应用微机技术，对CO_2焊短路过渡用电源加以研究。
A stepping motor control system based on AT89C52 chip microcomputer was described.
提出了一个由at89c 52单片机控制步进电机的实例。
According to the characteristics of dark green tea press process, we had developed one kind of based single chip microcomputer control and hydraulic dark green tea press machine.
根据黑茶紧压加工的特点，研制了一种基于单片机控制的液压助力式的黑茶紧压茶机械。
BP neural network control model based on the washing machine has been builded in this paper. A new off-line learning method of BP network has been suggested and realized on chip microcomputer.
论文以工业洗衣机为控制对象，建立了BP神经网络智能控制模型，提出了BP网络的一种离线式学习方法，并在微机中实现。
Main circuit uses independent RC pulse generator and control circuit can control the main circuit based on 8051 single chip microcomputer and TC4427 high-speed power MOSFET driver.
其主电路采用了独立式RC脉冲放电回路，控制电路则通过8051单片机和TC4427高速MOSFET驱动器完成对主电路的控制。
This paper presents the design of a new style single-phase electronic load system based on 80c196kc single-chip microcomputer according to the principle of PWM control voltage inverter.
本文根据PWM控制电压逆变器的原理，设计了一种基于80c196 K C单片机的新型单相电子负载系统。
This paper presents a microcomputer based automatic control system for a temperature testing chest.
介绍了一种温度试验箱的微机自动控制系统。
A new type of numerical control system with double CPUs is designed, which is based on LG97L52 single-chip microcomputer and combines PLC functions with MNC functions.
基于LG97 L 52单片机设计了一种双cpu结构的新型数控系统，该系统将P LC的功能与MNC的功能融为一体。
The control system of the grinder is based on GMS97L52 single - chip microcomputer and has functions of automatic division, automatic grinding wheel feeding and automatic grinding repetition.
磨刀机的控制系统基于GMS97 L 52单片机，具有自动分齿、砂轮自动进给、自动重复磨削等功能。
The nacelle control system of intelligent wind generator is based on fuzzy control. Host computer adopted the fuzzy controller 80c552 of single chip microcomputer.
基于模糊控制的智能风力发电机机舱控制系统，主机采用单片机模糊控制器80c552。
According to the fuzzy immune PID control theory, a high performance fuzzy immune PID controller based on the single microcomputer control chip has been designed.
根据模糊免疫PID控制理论，设计了基于单片微机控制芯片的高性能模糊免疫PID控制器。
This paper introduces a system of frequency measurement and control system based on single-chip microcomputer control.
本文在对单片机小系统进行研究的基础上，介绍了一种由单片机控制的频率测量控制系统。
The protection of feeder line in DC traction supply system is based on microcomputer, which is used to control and protect the high-speed circuit breakers.
直流牵引供电系统的馈线保护以微处理器为基础，用来完成对直流快速断路器的控制和保护。
Although the testing system of Microcomputer-based Protection device has been coming into maturity, testing system of distributed stability control device is just in the beginning nowadays.
相对于继电保护装置测试系统的成熟，稳定控制装置的测试系统可以说还是处在刚刚起步的阶段。
Although the testing system of Microcomputer-based Protection device has been coming into maturity, testing system of distributed stability control device is just in the beginning nowadays.
相对于继电保护装置测试系统的成熟，稳定控制装置的测试系统可以说还是处在刚刚起步的阶段。
应用推荐