Space Micro received application-specific integrated circuit (ASIC) devices in March from their silicon foundry and are under test and evaluation.
这种专用集成电路，目前正处于测试和评估阶段。
An equivalent circuit model of vibratory micro - machined gyroscope's mechanical properties is derived according to its working principle.
根据振动式微机械陀螺的工作原理，建立了其机械特性的等效电路模型。
This paper introduce the application of micro assembly circuit micro module in microwave power amplifiers and its thermal management.
提出了微组装电路组件在微波功放控制电路中的应用，介绍了微组装电路组件的散热措施。
Micro cell corrosion originally carried out in pearlites on the external surface of the pipe where micro cell circuit could be formed, and gradually developed and spreaded.
认为，油管失效是由于微电池腐蚀造成的，腐蚀先在钢管外表面能构成电池回路的珠光体晶粒中进行，然后逐渐扩展到周围的晶粒。
The hardware design includes the SCR voltage regulating main circuit and the control circuit whose core is the PIC16C74 micro-controller.
系统的硬件设计包括晶闸管调压主电路设计和以PIC16C74单片机为核心的控制电路的设计。
The structure of micro cantilever bridge, the photolithographic mask and the circuit system of the sensor is designed.
从理论上阐述了微悬桥结构气体流速传感器的工作原理，设计了微悬桥的结构、工艺版图以及其电路系统。
Interconnect geometric variation extraction is a key factor for the integrated circuit design for manufacturability research and development, under ultra deep sub-micro process nodes.
硅片上互连线几何变异提取对于超深亚微米工艺节点下集成电路可制造性设计研究开发极其关键。
An improved equivalent circuit mode more suitable for micro inductor with magnet - IC films is proposed.
提出了磁性薄膜电感器的改进型等效电路模型。
This paper introduces a design of machine in small range tension test which is applied to a field of micro-electronics integrate circuit, by analyzing tasting method and sensor theory.
通过对张力测试的分析及传感器的原理分析，介绍一种应用于测试微电子集成电路丝线张力的小量程张力测试机构的设计。
The circuit composed of switch and diode is applied to connect photovoltaic modules for the electrical reconfiguration of small-size photo-voltaic array in macro and micro layouts.
在此基础上，提出利用开关管与二极管电路连接光伏模块，实现小型光伏阵列的宏观与微观结构布局电气重构。
Analysed the basic theory of micro-capacitance gauging circuit, the characteristics of circuit, and the problems now exist.
分析了目前微小电容测量电路的基本原理、电路特点以及存在的问题。
This paper describes new development of wet plating process in micro fine circuit formation. It can form micro fine circuit pattern on improved performance polyimide film.
概述了在微细线路形成中湿式镀工艺的新开发，可以在改性聚酰亚胺膜上形成微细线路图形。
An output buffer amplifier with compact structure used in detection circuit of micro sensor is presented.
设计了一种主要用于微传感器读出电路的输出缓冲放大器。
This paper deals with the controlling circuit of moving which is designed by the acting of walking type micro robot.
本文主要介绍了根据微小步行机器人动作过程设计的动作控制电路。
A blocking scheme for current circuit break in differential protection system of transformers performed by software of micro-computer is proposed in this paper.
本文提出了一种利用微机软件实现的变压器差动保护电流回路断线闭锁方案。
The application of a low-voltage micro-displacement driving circuit and its control method on an optoelectronic profilometer are discussed.
讨论了低压微位移驱动电路及控制方法在光电轮廓仪上的运用。
In order to realize a high performance closed-loop micro-accelerometer system, the study on full-differential interface circuit was taken in this paper.
为了实现高性能闭环微加速度计检测系统，本文对全差分检测电路进行了研究。
For the hardware, not only all-purpose expanded circuits of the single-chip micro-processor but also input circuit and safe circuit for power failure have been designed.
硬件电路除一般单片机扩展电路外，还设计了输入电路和掉电保护电路。
The micro-variation equivalent circuit method is used to analyse and study the circuit features of the multiple unit tubes with the isomorphous or heterogeneous structure systematically.
应用微变等效电路法，对具有同型和异型结构的两类复合管的电路特性，进行了比较系统的分析和研究；
This paper introduces the theory of operation, measurement and control circuit design, software design of a power factor automated compensator, which is mainly designed with 8031 micro - controller.
介绍一种以邓8031单片机为核心构成的功率因数自动补偿控制器的工作原理、测控硬件电路及测控软件的设计。
Full bridge topology was used in the main circuit, IGBT was used as power switching device, and micro-crystal core was used in mid-frequency transformer.
其主电路采用全桥式拓扑结构，以IGBT管为功率开关器件，中频变压器使用微晶磁心。
The micro-controller unit (MCU) is the core of the digital part, which still includes keyboard and sound-light notice circuit.
数字部分以微控制器为核心，还包括键盘和声光提示电路。
The specific structure capacitive force micro-sensor is introduced. The principle and survey circuit demonstrated are demonstrated and analyzed.
介绍了一种经特殊工艺处理的电容式压力微传感器，分析和论证了其结构设计、工作原理和测量电路。
The micro-computer controlled and modular designed host circuit can be used to construct a multi-gauge vacuum meter or other kinds of vacuum meters.
主机结构采用微机控制和真空计模块化设计，可构成复合真空计或用于组装其他真空计。
The system includes constant potential circuits, micro-current detection circuit, controller and its peripheral circuits as well as the communications with the PC.
该系统包括恒电位电路、微电流检测电路、控制器及其外围电路以及与上位机的通信。
Its business covers network communication, computer system integration, surface mounting technology, printed circuit boards, electricity meters, micro motors, and high frequency devices.
其业务范围包括网络通信，计算机系统集成，表面贴装技术，印刷电路板，电表，微型电机，和高频设备。
In a microcomputer, a touch type keyboard, with LCD backlight LCD screen, using the latest micro-processing technology and high reliability of integrated circuit.
微电脑，触摸式键盘，带背光lCD液晶显示屏，采用最新的微处理技术和高可靠性集成电路。
This system is composed of sensors, the signal processing circuit, micro-processor and recording device.
该系统由传感器、信号处理电路、微型计算机及记录装置组成。
The paper mainly discusses the working principle and structure of a new toroidal micro-magnetic fluxgate integrated inside printed circuit boards (PCB).
介绍了一种新型的基于印刷电路板技术基础上制造的环形微型磁通门传感器的工作原理和结构。
The paper mainly discusses the working principle and structure of a new toroidal micro-magnetic fluxgate integrated inside printed circuit boards (PCB).
介绍了一种新型的基于印刷电路板技术基础上制造的环形微型磁通门传感器的工作原理和结构。
应用推荐