Metal Doctor (MD) is a pulsed micro-welding process that is being used increasingly for small scale and precision coating and repair of high value components.
金属医生是一种脉冲微弧焊接过程，可以用来在小面积范围内实现精密涂层和用来修复高附加值的部件。
The greater stability of these power sources allows very low currents to be used particularly for micro-TIG welding and largely replaced the plasma process for micro-welding operations.
这些电源稳定性较好，允许专用于微型TIG焊的电流非常低，可以大量取代等离子方法用于微型焊接作业。
Research progresses of laser trimming, laser drilling, laser cleaning, laser flexible routing and laser micro welding applied in the IC fabrication and packaging are given.
介绍了在集成电路制造封装中采用的激光微调、激光打孔、激光清洗、激光柔性布线和激光微焊技术。
Programmable controller C20 is used in the program control of TIG automatic welding on manufacturing micro motor shell and stator core.
利用C20系列可编程序控制器对微电机加工制作中的定子铁心、电机壳体t IG自动焊接实现过程程序控制。
The character of microstructure and micro rigidity of bond area of the ZA alloy in the TIG welding was investigated using TME, SME and other methods.
用光学显微镜、透射电镜、扫描电镜、能谱分析、显微硬度等分析手段，对ZA合金TIG焊接熔合区的显微组织及其形态、显微硬度及成分等进行了研究。
In this paper, a variable model of optimum droplet transfer mode for pulsed GMA welding using a steel electrode is developed on the principle of the micro-interference instability of magnetofluid.
前言：基于磁流体微扰动“失稳”的原理，建立了钢焊丝脉冲GMA焊最佳熔滴过渡形式的参数模型。
Ocean series micro spot welding is my company to meet industry needs, independent development and production of a product processing equipment.
海洋系列微型点焊机是我公司为满足行业需求，自主研制生产的一款产品加工设备。
Hot-rolled pickled steel for automotive wheel is low carbon micro-alloyed steel with excellent properties of cold forming and welding produced by using advanced TMCP technology.
宝钢车轮用热轧酸洗钢带是采用控轧控冷工艺生产的具有优良冷成形性能和焊接性能的低碳微合金化钢。
With the micro-computer control technology, the teaching system of NC arc welding robotic positioner is designed and realized.
采用微型计算机控制技术，设计实现了任意位置定位的数控焊接变位机的示教系统。
In addition, the metal body within welding heat effect zone will produce a lot of micro-cracks because of infiltration of solid solution nitrogen in course of porcelain spraying.
此外，喷瓷管道焊接热影响区的金属基体将由于喷瓷过程中渗入的固溶氮而产生大量微裂纹。
In this paper, the micro-computer controll mode adopting 8098 slice computer system is realized on the basis of traditional thyristor arc welding rectifier.
本文在传统晶闸管逆变弧焊电源的基础上，实现了采用8098单片机系统的微机控制模式。
The purpose is making use of single chip micro-computer to control four processes of mutual welding of reinforcing steel bar, which makes automatic mutual welding realize really intelligent control.
利用单片机对钢筋对接焊的四个过程进行控制，使全自动对接焊真正实现智能控制。
The article discussed the feasibility of micro-plasma arc welding Co-Cr alloy for oral cavity repair.
试验研究了钴铬合金口腔修复材料微束等离子弧焊的可行性。
Research on micro-plasma arc welding of Co-Cr alloy metal in oral cavity repair;
探讨了以手工方式进行铸造钴铬合金口腔修复材料微束等离子电弧焊的可行性。
At the same time, using the micro-shear test result to study the micro-performance changes in natural aging of several Al-alloy joints, and the influence of Al-alloy joint by welding parameters.
同时用微型剪切试验研究了几种铝合金焊接接头的自然时效的微区性能变化和焊接规范对铝合金焊接接头性能的影响。
The Welding Technology of lower power pulse YAG laser beam welding micro-module with filler wire was given.
给出了利用脉冲YAG激光做微型结构件的激光填丝焊接的较佳焊接工艺。
The thesis aims to develop a micro-vibration platform using Giant Magnetostrictive Vibrator (GMV), which is expected to improve the vibrating force and frequency scale of vibration welding technic.
针对振动焊接中激振器的激振力不大、频带不宽等缺陷，本文研制了一种以超磁致伸缩激振器为执行元件的微振动平台。
It is proved by fractal theory that the welded state of every micro zone at welded surface is uneven in the formation process of isothermal superplastic solid-state welding joint.
这也从分形理论的角度证明了在超塑性固相焊接头的形成过程中，焊接面各微区的焊合状态是非均匀性的。
It is proved by fractal theory that the welded state of every micro zone at welded surface is uneven in the formation process of isothermal superplastic solid-state welding joint.
这也从分形理论的角度证明了在超塑性固相焊接头的形成过程中，焊接面各微区的焊合状态是非均匀性的。
应用推荐