As an excellent method of robust design, it has a large number of applications in many engineering fields.
它作为一种优秀的鲁棒设计方法，已经在众多工程领域当中大量应用。
The robust design method was used to develop the prescription of the emulsion for photochromatic paper.
采用稳健性设计技术研发彩色相纸用乳剂的配方。
A dynamic design method of robust sliding mode controller in AC servo system is proposed in the paper.
文章提出了一种适用于交流伺服系统的鲁棒滑模控制器的动态设计方法。
Applying Lyapunov direct method, a design method of continuous robust controller is proposed based on the upper bounds of the uncertainties.
应用李亚普诺夫直接法，提出了一种基于不确定项上界的连续型鲁棒控制器设计方法。
A numerical example is given to demonstrate the design procedure of the decentralized feedback robust controllers, in the light of the method developed in this paper.
根据本文提出的方法，给出了一个数值例子以说明分散反馈鲁棒控制器的设计过程。
A new design method of digital PII robust adjusting controller for a general process control system with large time varying time delay is developed by studying its properties.
通过分析典型大时变时滞工业过程的特性，提出了一种新的数字PI I鲁棒调节控制器的设计方法。
This paper presents a new method of optimal robust pole_placement using the theory of dynamical interval, and apply it to design robust controller of hydraulic turbine regulating system.
本文应用动态区间系统最优鲁棒极点配置方法，对常规极点配置方法进行了改进，并应用于水轮机调节系统的最优鲁棒控制器的设计。
A design method of new variable structure robust controller based on the expected characteristic is introduced.
提出了一种基于期望特性的变结构新型鲁棒控制器的设计方法。
Comparing with traditional methods, the reliability robust optimization design information of automobile front-axle can be obtained accurately and quickly by the proposed method.
与传统方法相比，该方法更能迅速准确地得到车辆前轴的可靠性稳健优化设计信息。
A design method of the robust adaptive disturbance attenuation controller for nonlinear systems with uncertainty and disturbance is discussed.
针对带有不确定性和外界扰动的非线性系统，讨论了鲁棒自适应干扰衰减控制器的设计方法。
A new robust reliability method for stabilizing controller design of uncertain systems is presented based on quadratic stability criterion.
基于二次稳定性准则，提出了参数不确定系统鲁棒镇定控制器设计的鲁棒可靠性新方法。
Also, the unity of optimal dynamic performances and the robust stability makes it possible that this design method is suitable for real-life application.
最优动态性能指标与鲁棒稳定性的统一使该控制器的设计方法具备了工业应用条件。
According to the related theories of LMI processing method for robust controller design, a robust output feedback controller is designed which satisfies the performance index requirements.
根据鲁棒控制器设计的LMI处理方法的相关理论，设计出满足性能指标要求的鲁棒的输出反馈控制器。
To enhance the performance of dynamic systems, a design method of robust output-feedback controller based on the linear matrix inequality technique was proposed.
为提高动态系统的性能，提出了一种基于线性矩阵不等式技术的鲁棒输出反馈控制器设计方法。
Combining optimal design method with robust design principle, a new approach for the robust optimal design is investigated make use of stochastic simulative experiment.
本文把最优化设计方法和稳健设计思想有机地结合，提出一种基于随机模拟试验的稳健优化设计方法。
A design method of a robust rotational velocity controller of water hydraulic servomotor was presented for the uncertain parameters and the load fluctuation.
针对液压伺服马达的参数不确定性以及负载转矩脉动等问题，提出了一种鲁棒转速控制器的设计方法。
In this paper, a new design method of robust predictive control, predictive quadratic stability controller, is proposed based on GPC state feedback.
基于广义预测的状态空间形式，提出了一种新的鲁棒预测控制设计方法—预测二次稳定控制器。
A new method of robust controller design has been developed on the basis of soft-bound description of modeling errors.
本文基于对系统建模误差的软边界描述，提出了一种新的鲁棒设计方法。
In this paper, based on the theories of optimal control and pole assignment, a design method for suboptimal robust regulators which have low sensitivity and good dynamical characteristics is proposed.
本文基于最优控制和极点配置理论，提出一种灵敏度低、动特性好的次最优鲁棒调节器设计法。
Robust design as an effective way to improve the quality of products is becoming a more and more important method in the filed of product design especially in automobile engineering.
产品的稳健性优化设计作为提高产品设计质量的有效方法，在工程设计领域特别是汽车工程领域越来越得到人们的重视。
Analyzing the characteristics of Taguchi method and tolerance model of robust design, we advance a new strategy of robust optimization design process based on Taguchi method and tolerance model.
分析了田口方法和容差模型法的各自特点，提出了一种综合运用两种方法使其互补的稳健优化设计进程策略。
The initial stress is one of the most important parameters for the design of underground rock engineering, and hydro-fracturing method is a robust technique for stress measurement in deep rock mass.
初始地应力状态是岩石地下工程设计中的重要参数，而水压致裂法是深部岩体应力测量的理想方法。
A design method of robust fault tolerance for uncertain linear systems with sensor failures is discussed in this paper.
对具有不确定参数的连续控制系统，针对传感器失效，研究了鲁棒容错控制器的设计问题。
A robust design method of planar linkage mechanism is proposed when the length errors of links and the kinematic pair clearances are taken into account.
考虑杆长制造误差和运动副间隙的影响，提出一种平面连杆机构的稳健设计方法。
The method support vector machines in returning essence, and the return pan-robust ability of vector machines is improved through reasonable design.
该方法从支持向量机的回归本质出发，通过更加合理地设计隶属度函数，提高支持向量机的回归的泛化鲁棒能力。
In this paper, two new methods of thermal error robust modeling for NC machine tools are proposed: one is the comprehensive extreme value method, the other is the optimal experiment design method.
提出数控机床热误差鲁棒建模的综合极值法和优化试验设计法两种新方法。
We consider robust controller design problem of a class of linear systems for actuator and control surface damage, we presented tolerant robust controller design method.
对执行器故障和控制面故障情况，提出了容错的鲁棒控制器的设计方法。
In this thesis, the author's objective is to design a robust automated fingerprint classification system (AFCS) with a higher accuracy to overcome the shortcoming of the traditional method.
本文旨在研究一种鲁棒性较强的自动指纹分类系统(AFCS)，克服传统自动指纹分类方法的不足，提高自动指纹分类的准确性和鲁棒性。
At first, this paper introduces the parameter space design of robust control systems. A robust design of lateral-directional stability system for a aircraft is then finished in the method.
首先介绍了鲁棒系统设计的参数平面法，然后采用该方法对某支线客机的侧向稳定系统进行了鲁棒设计。
A new method of IP robust controller design for NC machine tool droved by linear servo system was presented based on robust control theory.
对数控机床直线伺服系统IP控制器提出用鲁棒控制理论进行设计的新方法。
应用推荐