D transient temperature field of surfacing is simulated by the method of numerical analysis.
对堆焊温度场进行了三维瞬态数值模拟。
The amplitude frequency response curves and their frequency properties of the parametric resonances are investigated by using the method of numerical analysis.
用数值方法分析了各种参数共振的响应曲线，其存在区域以及响应频率与脉动流频率之间的关系。
This paper introduces the present method of numerical analysis and design model for structure calculation in underground construction. Then, these calculative methods were evaluated.
本文介绍了目前地下工程结构设计采用的计算模型及相关的数值分析方法，并对各计算方法进行了评价。
The theoretical analysis and numerical experiments show that the multiscale finite element method presented in this paper is very effective to solve above these kinds of problems.
理论分析和数值实验均表明：多尺度数值方法对求解多孔复合介质周期结构的热传导和质扩散问题是可行的和有效的。
This paper presents the analysis of the vertical viscoelastic dynamic responses of pipe group by Laplace numerical inversion method.
应用担普拉斯数值反演方法分析了群桩垂向粘弹性动力反应。
The theoretical analysis and numerical results of two typical examples show that this method can decrease the numbers of iterative by30%and reduce the computation time greatly.
两个典型算例的理论分析和实际计算表明，这种预条件方法可以降低方程的迭代次数约30%，明显减少方程求解时间。
A numerical model based on the finite element method incorporating an arc-length algorithm for nonlinear full-range analysis of UPC beams was developed.
建立了基于有限元方法并结合一种弧长算法的适用于UPC梁非线性全过程分析的数值模型。
The study provides effective numerical analysis method and theoretical basis for the design and optimization of automobile semi axle cross wedge rolling.
研究结果为优化和设计汽车半轴楔横轧设备提供了有效的数值分析方法和理论依据。
In this paper, a new numerical method of parameter-oscillation mode analysis for large power systems is presented.
本文给出了一种大规模电力系统参数—振模分析的新的数值方法。
A hyper finite element method applied to the structural analysis of shear wall is presented which is a new numerical method used for analyzing large scale complicated structure.
提出了一种用于剪力墙结构分析的超级有限元方法。超级有限元法是一种用于分析大型复杂结构的新的数值方法。
The traditional analysis method of structure importance is a determined logical problem which is based on numerical mode (0, 1).
传统结构重要度分析方法是基于数值模式(0,1)的方法，是确定的二值问题。
The stability analysis of arch dam abutment rock mass include numerical method analysis and model experiment analysis.
拱坝坝肩岩体的稳定分析方法包括数值分析法和模型试验法。
Validity of the computational model and method is verified through comparison between the results of the shaking table test and numerical analysis.
进行了数值分析，并与试验结果进行了比较，验证了本文提出的计算模型与方法的正确性。
The method is generally less precise than refined methods of numerical analysis.
这种方法不如精细的数值分析法来的精确。
Because of good applicability and high precision the finite element analysis method has become the preferred method for numerical magnetic field computation of machines.
由于电磁场有限元分析方法具有通用性好、计算精度高的特点，因此成为目前首选的电机磁场数值计算方法。
Meanwhile, the article discussed the application of present theory analysis and numerical simulation method and predicted the trend of the research on the flammable gas explosion.
同时讨论了己有理论分析方法和数值模拟方法的应用，分析了可燃气云爆炸研究的发展趋势。
The function and application of 3DSIS are shown. The integrated model of 3DSIS, numerical analysis method and expert system is suggested.
阐述了3DSIS的功能和应用，提出了3DSIS与数值分析方法、专家系统耦合集成的模型。
The negative moment of the beam can not be concluded by the method based on the half-space elastic foundation theory, but the negative moment is proved by the numerical analysis.
基于弹性半无限空间的幂级数法不能计算格构梁上的负弯矩区段，与数值分析的结果不符。
The methods of arch dam abutment rock mass include numerical method analysis and model experiment analysis.
拱坝坝肩岩体的稳定分析方法包括数值分析法和模型试验法。
Based on the theory of commutation in DC machines, this paper describes a numerical analysis method for analysis of the commutation spark.
本文根据直流电机换向理论，给出了一种分析直流电机换向火花的方法。
The stiffness coefficients of piles have been calculated by numerical method and duly employed in the matrix analysis of pile foundations as space structures.
利用主解系数等方法导出了桩轴向、横向及扭转刚度系数的通用算法并用于桩基作为空间结构的矩阵分析。
Iintroduce basic calculation idea of ventilation network nodes analysis method and numerical solution on circuit wind flux method.
简要介绍了网络节点法求解的基本思想和回路风量法的数值解法。
The filed numerical analysis method of import parameters is presented, and the result of ANSYS is given also.
提出了电机中重要参数的有限元求解方法，并给出了有限元分析的结果。
In this paper, an integrated finite difference method (IFDM) for numerical analysis of transient coupled heat and moisture flow in unsaturated soils is described.
本文介绍了求解非饱和土壤中热量和水分耦合传输问题的一种数值方法——积分有限差分方法(IFDM)。
In this paper the analytic mode method and numerical mode method for full wave analysis of electromagnetic scattering in cylindrically layered media are discussed.
本文讨论了径向柱面分层介质中全波分析的解析模式和数值模式方法。
Some kinds of numerical computation methods are recommended systematically including finite volume method, finite analysis method, finite element method and self-fit mesh method.
本文系统地介绍了数值计算中的各种方法，主要有有限体积法、自适应网格、有限分析法、有限元法等。
In this paper, numerical manifold method, a new numerical analysis method, is used to simulate the toppling failure process of a stratified rock slope.
本文利用数值流形方法对一层状岩石边坡的倾倒破坏过程进行了模拟。
A kind of direct numerical calculation method for the steady-state analysis of PWM inverter-fed induction motor drives was presented.
本文介绍一种脉宽调制型(PWM)逆变器异步电机变频调速系统稳态分析的直接数字计算方法。
A kind of direct numerical calculation method for the steady-state analysis of PWM inverter-fed induction motor drives was presented.
本文介绍一种脉宽调制型(PWM)逆变器异步电机变频调速系统稳态分析的直接数字计算方法。
应用推荐