A method of mirror face protection for (AlGa) as visible laser is presented.
本文介绍了一种可见光激光器端面镜面保护方法。
The analytical expressions of the electromagnetic field generated by the DC electric dipole in the upper space for the two-layer mode were obtained by using the method of mirror image.
将任意分布的电流源产生的电磁场看作是电偶极子产生的电磁场的叠加，利用镜像法推导了上半空间中的垂直直流电偶极子在两层媒质中产生电磁场的解析解。
Chinese garden designers have used the method of "borrowing scenery with a mirror" to create a sense of space.
中国园林设计师采用“借镜取景”的方法来营造一种空间感。
File to include this new method. The contents of the file should now mirror the code shown in Listing 14.
现在，修改config . php文件来包含这个新方法，文件的内容现在应当镜像清单14中所示的代码。
The complete details of the exact method and third party commands used (in sequence) to split the mirror.
在分割镜像时所采用的确切方法以及第三方命令(按顺序)的完整细节。
By using finite element method, the deformations of flat membrane mirror have been calculated.
运用有限元法对不同工况下平面薄膜反射镜的变形进行了计算。
The scan mirror is an very important part of a space remote sensor. This paper discusses the material development and the manufacture method of the big lightened scan mirrors.
扫描镜是光机扫描型空间遥感器的重要组成元件。文章针对目前空间遥感器上应用的大口径轻量化扫描镜，从材料和制作方法方面进行了一定的技术研究。
Based on the deployable structure of a mirror and the operation principle, the finite element method was used to analyze the unit naked mirror and some different mirror support schemes.
基于展开镜结构工作原理，运用有限元方法分析了展开式反射镜单元的裸镜及其支撑方案。
Optical scanning device, printing apparatus, and method for adjusting oscillation amplitude of an oscillating mirror.
光学扫描装置，打印设备，调整振动反射镜的振幅的方法。
The model simulating thunderstorm cell by means of three layers plane charged disk, the calculations for thundercloud electrostatic field use mirror method.
该模型采用三层平面布置的带电圆盘来模拟雷云空间，雷云静电场的计算采用镜像法。
A method for designing and fabricating a novel deformable mirror with large effective area is proposed on the basis of MEMS technology.
基于MEMS技术体硅工艺，提出一种新型大有效面积的连续变形反射镜的设计制造方法。
The modeling of toroidal mirror was analyzed by finite element analysis method.
利用有限元方法对超环面镜的压弯力学模型进行分析。
The hard X - ray pinhole imaging method and its application in a simple mirror for measuring the radiation properties of ECR plasma are presented in this paper.
本文描述用硬x射线针孔成象法测量简单磁镜装置中ecr等离子体辐射特性的方法及其结果。
Dynamic modeling of deployable mirror system of the next generation space telescope is derived by the hybrid coordinate method.
采用混合坐标法建立了某空间光学望远镜可展开主镜的动力学模型。
This paper presents a closed form analysis method of nonlinear mirror mode lo-cking of a homogeneously broadened Laser.
对于均匀展宽激光器的非线性镜锁模，提出了一种解析分析方法。
The method of erbium-doped fiber amplifier(EDFA) gain flattening using a fiber loop mirror(FLM) acting as a wavelength filter was analyzed in theory.
从理论上分析了利用光纤环形镜（FLM）中的偏振耦合效应作为滤波器，对掺铒光纤放大器（EDFA）实现增益平坦化的方法。
At the same time, we refrain mirror frequency effectively with the method of digital quadrature modulation (DQM).
同时，由于采用了数字正交调制，从而有效地提高了镜频抑制。
This paper discusses our method to evaluate the uncertainty components of chilled mirror hygrometer during calibration process, and also a few possible influencing factors we are interested in .
本文讨论了冷镜式露点仪测量不确定度的多种因素，其中有些不确定度分量目前还难以估算出具体数据。
We calculated the transmission of the mirror and the distribution of electric field by using multiple scattering method. The result shows that it can be used as a reflecting mirror of an antenna.
提出了用介质圆柱光子晶体作微波天线的柱抛物面反射镜，用多重散射方法计算了反射镜的透过谱，并模拟计算了天线的电场分布，初步认为可以用非晶光子材料作微波天线的反射镜。
The measuring method and results of the ECR plasma properties taken from hard X-ray pinhole camera on the MM-2 magnetic mirror are presented.
介绍了用硬x射线的针孔成像法测量简单磁镜装置MM - 2中ecr等离子体特性的方法及结果。
A novel method for calculating group delay of multi-cavities filters based on multi-mirror theory is presented, which simplifies the calculation and is not restricted by the practicable materials.
基于多镜理论提出了一种新的多腔滤波器群延迟计算方法，简化了计算过程，使得计算不再受实际材料的限制。
Proposed measuring method is useful for study of matched mirror performance, for establishment of its design model and trim of its mould.
这种测量方法对于研究车灯配光性能，建立起配光镜设计模型和对配光镜模具进行修正具有实际意义。
A method to measure accurately and automatically dimensions of automobile lamp matched mirror system is proposed and a measure system is developed.
提出一种自动检测汽车车灯配光镜组成单元几何参数的方法。
A novel method for calculating group delay of multi-cavities filters based on multi-mirror theory is presented, which simplifies the calculation and.
基于多镜理论提出了一种新的多腔滤波器群延迟计算方法，简化了计算过程，使得计算不再受实际材料的限制。
The method of compensating the aberration by using an intra-cavity deformable mirror was carried out. The aberration being partial compensated was proved through the experiment.
介绍了一种利用内腔变形反射镜补偿激光器腔内畸变的方法，通过实验证实了该方法能对腔内畸变进行一定的补偿。
Associating problems encountered in teaching of an introduction to electromagnetic fields, two viewpoints concerning spherical mirror method and calculation of electric field energy are pointed out.
结合“电磁场导论”课程教学中遇到的问题，指出有关球面镜像、电场能量计算的两点看法。
Considering that the surface of the magnetic pole is an ideal magnetic wall, by means of mirror method, the effect of outer magnetic pole on resonator impedance is analyzed quantitatively. The...
视磁极面为理想磁壁，应用镜象法，定量分析了外磁铁极头对谐振子阻抗的影响。
A method of determining the incident angles distribution on dichroic mirror is presented, according to the theoretic analysis of working condition of dichroic mirror in optical engine.
本文通过对二向分色镜在投影光路中工作状态的模拟和分析，提出了一种计算分色镜上光束入射角分布的计算方法并推导了相应的表达式。
It increases the virtual samples by the method of combining mirror transform, integral map and geometric transform such as shifting, rotating and zooming.
将镜像变换、平移、旋转、缩放等几何变换手段与积分投影等方法相结合来增加虚拟样本。
It increases the virtual samples by the method of combining mirror transform, integral map and geometric transform such as shifting, rotating and zooming.
将镜像变换、平移、旋转、缩放等几何变换手段与积分投影等方法相结合来增加虚拟样本。
应用推荐