In this paper, method of hardware design for SPWM inverter controlled with 8098 chip-microcomputer is described.
本文介绍了一种未采用SPWM专用芯片，而采用8098单片机实现的全数字式SPWM变频器硬件设计方案。
According to the design procedure of this method, it is realized on embedded hardware platform and eventually prove to be feasible and correct.
根据该方法的设计流程，在嵌入式的硬件平台上使之实现，证明方法的可行性和正确性。
This paper introduces the hardware design and the position control method of a valve positioner based on ARM microcontroller.
介绍了一种基于ARM的智能阀门定位系统的硬件设计和定位控制方法。
This paper introduces a method of hardware constitution and software design of embedded system containing Ethernet interface and adopting DSP as its core processor.
介绍了以DSP为核心具有以太网接口的嵌入式系统的硬件电路组成和软件设计方法。
In this paper, the design method and process of intelligent controller is narrated from the view of hardware and software.
从软件和硬件角度详细介绍了智能调节器的设计原理和方法。
The mathematical model of master-slave synchronous winding control system is established here, and the design methods of the system hardware and control method are introduced in detail.
建立了主从式同步卷绕控制系统的数学模型，并详细介绍了控制系统硬件和控制方法的具体设计。
The application of PLC in the control system of platform booms, the hardware and software design method of PLC control system are presented and discussed.
介绍了PLC在舞台吊杆控制系统中的应用，以及PLC控制系统的硬件和软件的设计方法。
In the paper, an analytic method is described in which a microcomputer is used to analyze dynamic spectrum of display device, and a hardware design of microcomputer interface is discussed specially.
本文提出了一种应用微机对显示器件的动态光谱进行分析的方法，着重于微机接口的硬件设计。
The fundamental principle, hardware components and the method of software design of realtime system of data acquisition for computerised pipe measuring machine system were discussed.
论述了管形测量机的基本原理、硬件结构、实时数据采集系统的软件设计方法。
This paper discusses the design method of signal conditioning circuit and Compensating technology of measuring error in using hardware and software for the pressure sensors.
介绍压力传感器的信号调节电路设计方法和测量误差的软、硬件补偿技术。
This paper also gives the system components and the control method of the hardware and software design.
文中同时给出了系统组成，以及控制的软硬件设计方案。
This paper expounds the measuring principle of ultrasonic liquid gauge, its practical hardware circuit and software design method.
阐述了超声波液位计的测量原理，给出了实用的硬件电路与软件设计方法。
The structure and the principle of auto board shears have been introduced with the design method of hardware and software implemented by 8051 single chip microcomputer.
介绍了自动剪板机系统的结构组成和工作原理，叙述了8051单片微机实现其生产过程控制的硬件与软件的设计方法。
The paper introduced the overall design of system, described the system hardware, software and realization method.
介绍了系统的总体设计，论述了系统的硬件、软件及实现方法。
In this paper, the operation principles of the total system and power-amplifier circuit, design method of digital PWM hardware circuit and software are described, and.
文中着重阐述系统和功放电路的工作原理、数字脉宽调制器的硬件电路、软件设计方法，并给出实验结果。
This thesis introduces a hardware design and software implement method of USB port using CH371 which is a USB general interface chip.
本文介绍了一种使用USB通用总线接口芯片CH371实现USB接口的硬件设计和软件实现方法。
This method can be used for hardware design of precise digital measurement system.
该方法可用于精密数字测量系统的硬件设计。
The hardware and software design method of a tax controlled gathering machine for commercial use is presented.
详细分析了一款商用税控收款机的硬件和软件的设计方法。
The paper introduced fundamental principle of SVPWM technology, and gave a SVPWM control method of switching mode of switch determined by hardware based on TMS320F2407A DSP and its software design.
文章详细介绍了SVPWM技术的基本原理，并给出了一种基于TMS320F2407ADSP的由硬件决定开关切换模式的SVPWM控制方法及其软件设计。
The design method of hardware and software of automatic test system for air data was introduced in this paper and the structure of hardware and software and key technique was also given.
阐述了大气数据自动测控系统的硬件和软件设计方法，介绍了该系统的硬件和软件结构及关键技术，分析了系统的特点和功能的实现。
In the text, it USES AT89C52 as core, elaborated the design of control and temperatures measure system, discuss the design principle of the system software, hardware and method.
文中以at89c52单片机为核心，阐述了多场合温度测量控制系统的设计，讨论了系统软件、硬件的设计原理和方法。
Focusing on different types of interference possibly encountered in power signal monitoring, a design method of mathematical morphology filter based on evolvable hardware is proposed.
针对电力信号监测中可能遇到的各种干扰，提出了一种基于进化硬件的自适应电力系统形态滤波器的设计方法。
After a brief introduction of the hardware frame for downhole motors test table, the design method of performance test data acquisition system is described.
在介绍螺杆钻具试验台硬件框架的基础上，着重阐述了基于计算机的性能测试数据采集系统的实现方法和软件设计。
This paper introduced the design method and research process of the control system, including hardware design, software design and so on.
本文论述了控制系统的设计方法和设计过程，包括硬件设计、软件设计等方面。
The paper introduces the design method of adjustable DC reference based on PWM and time-division, it gives hardware and software design.
介绍了利用脉冲调宽时分割技术设计的可调直流基准源的原理和方法，并给出了硬件电路和程序设计。
In this paper, the control principle of VVVF Providing-water system is introduced, mainly introduces structural properties of PLC control system, and the design method of hardware and software.
本文介绍了变频调速供水系统的原理，重点介绍了PLC控制系统的结构特点及系统硬件和软件设计方法。
This paper introduced the design method of the ground anti-cookoff device of air machine gun, offering detailed hardware composings and software design scheme.
介绍了航炮地面防走火装置的设计方法，并给出了较为详细的硬件组成及软件设计方案。
This paper introduced the design method of the period measure system of electronic bomb controller, offering the detailed hardware constituents and the software design method.
介绍了电动投弹器周期测量系统的设计方法，并给出了较为详细的硬件组成及软件设计方法。
This paper introduces the control principle of the filament winding tension control system and the design method of the hardware and the software.
介绍了纤维缠绕张力微机系统的控制原理及硬件、软件的设计方法。
The whole system concludes of total design, make-up of hardware and software, programming method, system optimizing, setting and debugging.
具体包括监控系统的总体设计、软硬件选择和构成、编程的思想方法、系统优化、安装调试等内容。
应用推荐