This method make it easy and reliable to obtain the dynamic parameters of rolling bearings.
为滚动轴承动态参数的获取提供了一种可靠的、简便易行的新方法。
Experiment result shows that this method can be applied to diagnosis the fault of rolling bearings.
实验结果分析表明，该方法能有效地进行滚动轴承故障诊断。
This paper describes an approach using power bond graph and condition space method to digitally imitate the dynamic characteristics of the hydrostatic bearings with film feedback throttle.
本文介绍采用功率键合图和状态空间法对薄膜反馈节流液体静压轴承的动状特性进行数字模拟的方法；
Based on the relation between reliability and lifetimes of rolling bearings, this paper gave a lifetime calculation method which depends on the relevant reliability range.
从分析滚动轴承的可靠性与寿命之间的关系出发，提出了在不同的可靠度范围内，采用不同的寿命计算方法。
The paper presents advantages of magnetic bearings and the design method of magnetic bearings as a spindle bearings in a grinder.
本文介绍了磁浮轴承的优点，并提出了磁浮轴承作为磨床主轴轴承的设计方法。
Diagnosis of rolling ball fault and inner race fault of rolling bearings confirm the effectiveness of this method.
通过诊断滚动轴承的滚动体故障和内圈故障，验证了该方法的有效性。
The test results indicate that the suitable choice of foil metal and the surface treatment method is very important to the durable performance of foil bearings.
分析表明：通过对箔片材料及表面处理方法的合理选择，可以显著改善箔片式动压气体轴承的启停性能。
To extract early fatigue feature of engine bearings, the paper presents an average spectrum method with double-wavelet and the diagnosis examples are used to show the validity of the method.
为了提取机车滚动轴承早期损伤类故障特征，本文提出了一种双重小波平均谱方法，并通过诊断实例验证了方法的有效性。
A new method to measure the inner diameter of bearings in cars and the overall scheme are given, and the corresponding test is carried out.
提出了一种车辆轴承内径测量的新方法和总体方案，并进行了相应试验。
For practical application, a balance method of surplus strength is proposed for selection design of rolling bearings which are non-symmetrically arranged and supported at two points.
本文从实际应用出发，提出“裕度平衡法”用于双支点非对称布置的滚动轴承选择设计。
A new method based FEMLAB was developed to predict static performance of air bearings.
研究了利用商用有限元软件FEMLAB进行气浮轴承静态性能分析的方法。
The types and working principle of preload of the angular contact ball bearings are introduced, the selection rules of the preload and calculation method of determining preload force are given.
介绍角接触球轴承预紧的类型及工作原理，给出了预紧选择原则和确定预紧力的计算方法。
This method can be used to analyse the causes of failure of floating piston pin bearings.
运用该方法可以对浮动式活塞销轴承故障进行分析。
This paper USES a guaranteed cost control method to design a controller of the grinder spindle system supported by electromagnetic bearings (EMBs).
该文采用保成本控制方法设计电磁轴承磨床电主轴系统控制器。
This paper presents an analytical method for calculating the load capacity and stiffness of externally pressurized gas journal bearings.
本文根据简化的二维流动模型，提出一种新的计算方法，用以计算小孔节流气体静压向心轴承的承载能力和刚度。
This paper introduces the dynamic te sting method for the faults of traction motor bearings of electric loco-motive by using vibrating diagnosis.
介绍了采用振动诊断技术，对机车牵引电机轴承故障进行动态检测的方法。
The result shows that the method can be effectively define the number and size of the bearing which has positive influence on the study of domestic production of bearings.
结果表明通过该方法能够有效确立大轴承的滚柱数量和尺寸，对大轴承的国产化有一定的积极作用。
The method described has certain reference value for establishment of assembling technics of other similar rolling bearings.
此方法对其他同类轧机轴承的装配工艺制定具有一定的参考价值。
Then, a fault diagnosis experiment of rolling bearings is given and the result shows the effectiveness of this method.
第三步，确定故障。最后做了一个滚动轴承故障诊断试验，结果验证了该方法的有效性。
The design characteristics, foundry technology and ultrasonic test method of heavy section ductile iron bearings for steam turbines was described and analyzed.
分析了汽轮机厚断面球铁件轴承座的设计特点、铸造技术和超声波探伤。
This paper offers a practical method for calculating the earthquake response of base isolation building equipped with the laminated rubber bearings on the basis of comprehensive analysis.
在分析国内外橡胶支座基础隔震建筑地震作用计算方法的基础上，提出了计算橡胶支座基础隔震建筑地震作用的实用计算方法。
In chapter 2, a new method for identifying the dynamic parameters of rolling bearings is proposed.
第二章提出了一种识别滚动轴承动态参数的新方法。
The application of the constant-contact resilient side bearings for speed increased freight cars is investigated, and a new idea of adjustment method is put forward.
对提速货车用常接触弹性旁承的使用情况进行了调查，并对其调整方法提出了一种新设想。
The condition and mathematical calculation method were presented for theoretical equation of porous bearings.
对应用于多孔质含油轴承的理论计算方程，指出了应用条件、数值求解方法。
An interchangeable method of outer ring assembly of needle roller bearings with or without inner rings is introduced in this paper.
介绍一种有内圈和无内圈的滚针轴承外圈组件互换的方法。
Based on the model, calculations for an actual structure of the bearings are carried out using finite element method.
根据所建模型，应用有限元法针对一具体结构进行了计算。
A calculation method based on three-dimensional model was developed to study the load bearing characteristics of externally pressurized spherical gas bearings with inherent compensation.
为研究环面节流静压气体球轴承的承载力特性，提出一种基于三维模型的计算方法。
The operation conditions and wear of crankshaft bearings in internal combustion engine are discussed in this paper. A model and method for calculating the crankshaft journal wear are given.
本文讨论了内燃机曲轴轴承副的工作状况和磨损，给出曲轴轴颈磨损的计算模型和计算方法。
This paper also studies inverse analysis method of response problem, and identifies stiffness of bearings of lathe spindle.
本文对响应问题逆分析方法进行了研究，并进行了机床主轴轴承刚度识别。
This paper also studies inverse analysis method of response problem, and identifies stiffness of bearings of lathe spindle.
本文对响应问题逆分析方法进行了研究，并进行了机床主轴轴承刚度识别。
应用推荐