Failure mechanism of vibration signal analysis is the mechanical fault diagnosis technology used in one of the main method.
故障机理的研究振动信号分析是机械故障诊断技术中采用的最主要的方法之一。
This paper takes company a as an example, and studies its incentive mechanism using the research method combined of theoretical studies and actual case analysis.
本文采用理论研究与实际案例分析相结合的研究方法，以A公司为研究对象，研究了其激励机制的问题。
The vector projection method is a graphical technique for motion analysis to the plane mechanism.
向量投影法是一种对平面机构进行运动分析的图解方法。
This paper studies the FFT analysis and the synthesis method of the symmetric coupler curves in mechanism.
本文对机构学中对称连杆曲线的FFT分析和综合方法进行了研究。
OBJECTIVE: To analysis the mechanism, method and effect of Chinese herbs, massage and acupuncture for treating knee osteoarthritis.
目的：分析中药、推拿及针灸治疗膝关节骨性关节炎的治疗机制、治疗方法和疗效。
After a brief description of the inertia vibrating mechanism with twin axles, the analysis and optimization method of dynamic model with two degrees freedom.
本文概要论述了双轴惯性振动机构，两自由度动态模型的分析和优化方法。
The structure, function, condition and factors of an objective system need to be studied thoroughly for analysis and synthesis of social mechanism method.
作为社会机制方法的分析和综合，需要就对象系统的结构功能、条件因素、中介联系和整体优化等方面作全面深入的探究和把握。
By using the mechanism method, the potential productivities of light, temperature, precipitation and soil were calculated by regression analysis in each county of Henan province.
采用机制法通过对光、温、水、土逐级衰减计算了河南省各县市小麦的光、温、水、土自然生产潜力。
On the basis of analysis of the process mechanism, the model for soft measurement of the dry-point of crude gasoline delayed coking is established by using PLS-RBFN parallel method.
在分析工艺机理的基础上，用PLS- RBFN并联方法建立延迟焦化粗汽油干点软测量模型。
The method of sedimentary fabric analysis is a useful tool in investigating the glacial sedimentation and the mechanism of glacial sediment formation.
沉积组构分析的方法是说明冰川沉积作用、冰成沉积物形成机理的一种有用的工具。
Forging mechanism is very complicated, and numerical simulation is the most effective method for plastic deformation analysis.
锻造成形机理非常复杂，数值模拟是目前塑性成形分析最有效的方法。
Using this method, we can protract vector analysis atlas of planetary gear drive mechanism.
应用此方法，可定性地绘制出行星齿轮传动机构速度分析图谱。
Secondly, on the basis of previous analysis results, this paper makes a emulation program of electromagnetic mechanism dynamic characteristics, combining with the magnetic circuit method.
其次，以前步分析结果为基础，采用“场路混合法”对迎击式交流接触器电磁机构的动特性进行了仿真。
The paper involves the conception of Internal-procedure and External-procedure, as well the study of method of rule termination analysis in search of active mechanism.
在主动机制系统中，本文提出了内部过程和外部过程的概念，并对规则终止性分析的方法进行了研究。
An evaluating indicator system is built through the method combining quantitative analysis and qualitative evaluation for evaluation of the decision-making mechanism.
决策机制评价则通过定量分析与定性评价相结合的方法建立一套评价指标体系。
The transfer function of the measuring platform system is set up by using mechanism modeling method, and the parameter is got by both academic analysis and experiment.
测试平台系统的传递函数通过机理建模的方法建立，通过理论分析与实验相结合获得各项参数。
The paper researches designing method of the motion rule-divisible cam mechanism , makes a detailed analysis of the mathematical equation, and builds the mathematical model of the cam mechanism .
研究了运动规律分段式凸轮机构设计方法与流程，对凸轮机构运动的数学公式进行了详细的分析和推导，建立了凸轮机构。
This paper studied the models of pre-mixed spark ignition gas engine particularly, which adopted the method of mechanism analysis and system identification.
本文采用机理分析与系统辨识相结合的方法，对预混点燃式气体燃料发动机进行了深入细致的建模研究。
The research that this text sets up the mechanism from the dynamic alliance set out, utilize service-oriented analysis and design method, has set up dynamic alliance and set up the frame model.
本文从动态联盟组建机制的研究出发，利用面向服务的分析与设计方法，建立了动态联盟组建框架模型。
The equations of the model is able to be the foundation of the mechanism analysis of truss support and the calculation method of parameters selected for a truss.
由该简化计算模型推导的公式可作为锚拉支架支护机理分析的基础和参数设计的计算方法。
The numerical simulation of the new type of DNG is studied by using FDTD method and CST software, and the physical mechanism analysis for this structure is discussed in detail.
用时域有限差分法和CST软件对该新型结构进行了模拟对比，并对其物理机理进行了分析，解释了其双负效应发生的原因。
This paper presents an analysis method for the acting mechanism of bolts in soft rock. The mechanical behaviors of rock bolting system and bolt itself are discussed respectively.
对软岩中锚杆的作用机理提出了一种分析方法，分别讨论了锚杆体系和锚杆本身的力学行为。
This paper introduced the principle of exponent product method and its application on the motion analysis of spatial closed-chain mechanism.
介绍了指数积方法的原理，以及它在空间闭链机构运动分析中的应用。
The strengthening mechanism of re multi-compound inoculation has been studied by using the method of metallurgical analysis.
通过金相分析方法对RE多元复合孕育剂的孕育强化机理进行研究。
With the analysis on mobile data services, an overload hybrid control mechanism, a combination of window method and leaky bucket method, is presented.
基于对移动数据业务特点的分析，提出了窗口算法和漏桶算法相结合的过载混合控制机制。
A dynamic analysis method using simulation technology for intermittent rotary sheet transfer mechanism was put forward. The process of mechanics simulation based on SIMULINK was introduced.
提出了运用仿真技术对间歇旋转式造纸机构进行动力学分析的方法，介绍了在SIMULINK下的机构仿真过程。
A kind of effective thought of design and method of analysis for determining the CAM profile of parallel indexing CAM mechanism was introduced.
介绍一种确定平行分度凸轮机构凸轮轮廓的有效设计思路和分析方法。
The paper researches designing method of the motion rule-divisible CAM mechanism, makes a detailed analysis of the mathematical equation, and builds the mathematical model of the CAM mechanism.
研究了运动规律分段式凸轮机构设计方法与流程，对凸轮机构运动的数学公式进行了详细的分析和推导，建立了凸轮机构的数学模型。
Applying the method of combining the mechanism analysis modeling and gray box modeling, the mathematic model of the single-shaft gas turbine generating units and the control system was established.
应用机理分析建模和灰箱建模相结合的方法，建立了单轴燃气轮机发电机组及其控制系统的数学模型。
This paper has researched the current character of linkage group subprogram, the common method and currency of make main-program for mechanism analysis.
对杆组子程序的通用性特征、主程序编制的一般方法和通用性等问题进行了研究，为开发机构分析的通用软件打下了基础。
应用推荐