Precautious use can protect the engine in time from mechanical damage due to reduction of wear and tear and improvement in lubrication.
预防性使用能及时保护发动机，这是由于磨损降低和润滑性改善，以减少机械损伤。
A correlation might be seen in the postoperative X-rays between the fracture reduction or implant position and implant related mechanical complications (cutting out).
从术后X片可以看出骨折复位或者植入物位置和相关的机械并发症(切出)具有相关性。
The results showed that the if steel has better deep drawability, higher mechanical and texture strength and elongation if the hot rolling temperature was low with big reduction in ferrite region.
结果表明，较低的铁素体轧制温度和较高的铁素体区压下量时，IF钢具有更高的深冲性能、相对较高的强度、延伸率以及织构强度。
Brownout: a reduction or cutback in electric power especially as a result of a shortage a mechanical failure or overuse by consumers.
部分灯火管制：由于电力不足、发电机出故障或用户用电过度而减少电力供应或停止供电。
They provide outstanding reduction of virus, bacteria, cysts, endotoxin and many other submicron particles through both electro-adhesion and mechanical processes.
他们可以通过电子粘附和机械工艺显著减少病毒、细菌、胞囊和很多其他的亚微颗粒。
In determining the main reduction ratio, the drive axle of the mechanical and structural analysis, and calculated the school.
在确定了主减速比之后，通过对驱动桥的力学和结构分析，进行计算校和。
The reduction in permeability in the near-wellbore area resulting from mechanical factors such as the displacement of debris that plugs the perforations or formation matrix.
在近井地带由机械因素造成的渗透率降低，如碎片的驱替堵塞射孔孔眼或地层。
Because of the use of frequency converter, so that pump speed decreased, exports to reduce stress, a reduction of mechanical wear, reducing maintenance workload, extended equipment life.
由于变频器的使用，使泵转速下降，出口压力降低，减少了机械磨损，降低了维修工作量，延长了设备的使用寿命。
One interesting inclusion is a distinction between mechanical image stabilization and digital blur reduction.
有趣的是包括了机械影像稳定和数码防抖的区别。
In this paper mechanical polishing; Chemical polishing and hydrogen reduction methods used im cleaning bearing steel surface for oxygen determination have been studied.
本文研究了用机械抛光、化学抛光和氢还原法处理轴承钢表面对测定氧的影响。
This may cause tissue weakening, resulting in reduction of the mechanical resistance to the growth potential of the coleoptile.
这可能引起组织松弛而导致胚芽鞘生长的机械阻力降低。
It was suggested that mechanical factors might be involved in the cause of the reduction in pulmonary function.
力学因素很可能是呼吸功能减退的原因之一。
Driving device uses shaft type reduction device directly connected to capstan idler, its construct is compact and mechanical efficiency is higher.
驱动装置采用轴装式齿轮减速机与主动滚轮直联传动，结构紧凑，机械效率髙。
For the washing machine noise and vibration reduction predecessors developed a series of mechanical damping Angle of approach, but there are limitations.
针对洗衣机的减振降噪前人开发了一系列机械角度的减振方法，但都存在种种限制。
The reduction of predeformation can also affect the mechanical properties of the steel sheet after the simulation test.
预变形时的变形量对模拟高温搪烧后钢板的力学性能也会产生影响。
Mechanical properties testing, SEM and TEM was used to study the effects of cold rolled reduction and aging temperature on the cohesion of the weak interface of DISC.
通过力学性能测试、扫描电镜及透射电镜观察，研究了冷轧压下量及时效温度对内生复合钢板弱界面结合强度的影响。
The project made studies on the manufacturing process of the bright nanometer Ag powder, and fixed the process route of chemical reduction-mechanical ball milling.
本项目对纳米光亮片状银粉的制备工艺进行了研究，确定了化学还原—机械球磨的工艺路线。
It is of practical significance to the rational application of the mechanical-natural ventilation system and the energy saving and consumption reduction.
对于合理应用机械-自然交替通风系统，节能降耗具有实际意义。
Through the rolling experiments, the influencing regularity of the rolling starting temperature and the rolling reduction on the microstructure and the mechanical properties has been obtained.
再轧制实验，获得了不同开轧温度和轧制压下量对组织性能影响数据。
The experiment results are meaningful for quantifying runoff and sediment reduction and deepening soil erosion mechanical process also.
研究结果对定量评价草被减流减沙作用和深化土壤侵蚀力学过程有一定的参考意义。
ObjectiveTo establish a three-dimensional finite element model and make mechanical analysis of "v" -type atlantoaxial reduction and internal fixation.
目的建立新型寰枢椎复位内固定器的三维有限元模型，并对其进行生物力学分析。
The mechanical property of the samples with slight banded structure is unnecessarily excellent, the annealing parameters adopted ought to accord with the reduction after cold rolling.
带状组织不明显的材料力学性能未必优越，退火工艺参数的选择应和冷轧压下量合理匹配。
The mechanical property of the samples with slight banded structure is unnecessarily excellent, the annealing parameters adopted ought to accord with the reduction after cold roiling.
带状组织不明显的材料力学性能未必优越，退火工艺参数的选择应和冷轧压下量合理匹配。
Micro electro mechanical systems Multi-granularity macro-modeling Non-standard structure Model order reduction;
微机电系统； 多粒度宏建模；非标结构；模型降阶；
Micro electro mechanical systems Multi-granularity macro-modeling Non-standard structure Model order reduction;
微机电系统； 多粒度宏建模；非标结构；模型降阶；
应用推荐