This paper mainly study the MCU control device and transducer vibration control device.
本文主要研究了单片机控制装置和变频器振动控制装置。
Therefore, the MCU control system is at an unprecedented rate to replace the classic electronic control system.
因此，单片机控制系统正以空前的速度取代着经典电子控制系统。
This design is integrated with MCU control all of the above FM function ASIC design of a digital FM radio system.
本设计就是用单片机控制集成了上述所有FM功能的专用芯片，设计一个数字FM收音机系统。
It consists of MCU control, power, sensor, oil amount warning, oil amount show, LED display and the software design.
包括单片机控制、电源、传感器、油量报警、油量显示、车速信息、里程信息、LED显示等模块设计和软件的设计。
This system consists of DDS signal generator module, MCU control module, keyboard input module and nixie tube display module.
本文所设计的正弦信号发生器主要由DDS波形产生模块、单片机控制模块、键盘输入模块和数码管显示模块组成。
Our company is a professional development and production of 32-bit processor MCU control system, with strong technical force.
我公司是一家专业开发和生产32位处理器的单片机控制系统，拥有雄厚的技术力量。
In addition, through the MCU control circuit communication with the outside world, we would achieve the Optical Modem distance management.
另外，通过MCU控制电路与外界的通讯，就可以实现光猫的远程管理。
The whole system is made up of three parts, the part of simulative waveform generation, MCU control circuit, function modules internal FPGA.
整个系统分为模拟波形产生、单片机控制电路、FPGA内部功能模块三大部分。
The system is mainly composed of Digital Synthesis circuit, modulation circuit, broadband power amplifier, the MCU control system, and a module.
本系统主要由数字频率合成电路、调制电路、宽带功率放大、单片机控制系统等模块构成。
In the thesis, design and implementation of intelligent & portable CPR device based on C8051F020 MCU control and compressed gas become as power source.
本文主要介绍了一种基于C8051F020单片机控制和压缩空气作为动力源的智能便携式心肺复苏机的设计与实现过程。
Based on the technology of MCU control, a device, which could prevent stealing electricity power of power distributing box, had been designed in this thesis.
基于单片机控制技术，本文设计了配电箱防窃电装置。
Advanced MCU control has full light touch interface including start control, temperature control and airflow control to achieve safety and reliable operation.
先进的微电脑控制技术，特有全轻触界面操作，包括开关控制，控温及风量控制，使操作更安全及可靠。
Advanced MCU control technology has light touch interface including start control, temperature control and airflow control to achieve safety and reliable operation.
先进的微电脑控制技术，特有全轻触界面操作，包括开关控制，控温及风量控制，使操作更安全及可靠。
The method of multi wind speed controlling and wind channel changing are presented and an anti-disturbance technique of the MCU control system is briefly introduced.
探讨了多级风速控制、风道转换的实现方法，同时简要介绍了控制系统的抗干扰技术。
Besides, a MCU control system is developed and it controls the execution mechanism to carry stock to the right cutting location according to the test result of the computer.
同时开发了单片机控制系统，单片机系统依据计算机发送的检测结果控制执行机构将砧木运送到指定的待切削位置上。
The single-chip MODEM majors in MCU control system. This paper introduced the fundamentals of the chip, the interface circuit linking 73K222AL and AT89C51, and its programs.
文章分析了它的主要特性，同时给出了73K222AL与单片机AT89C51的接口电路和应用程序设计。
MCU control charge and discharge by the state, achieve the best charge state. Automatic detection and tracking external battery temperature, built-in temperature compensation.
单片机控制充电和放电状态，达到最佳的充电状态。自动检测和跟踪外部电池温度，内置温度补偿。
The paper introduced control system about ATMEL89C2051 MCU control Dyeing machine blow head to realize some advantage of high precision, small volume, low cost, micro-power etc.
介绍用atmel89c 2051单片机控制染色机喷头控制系统。从而实现高精度、小体积、低成本、微功耗等多方面优点。
Based on the traditional wireless communications limited transmissions is limited, based on the NRF905 rf chip design of two-way communication system and MCU control unit mainly.
针对传统无线通信是单向传输的局限问题，设计了基于nRF 905射频芯片的双向通信系统并以单片机为主控制单元。
The two-arm bridge measuring low resistance circuit of MCU control, multivibrator measuring electric capacity, auxiliary leveling bridge circuit, output display circuit are designed.
设计了单片机控制双臂电桥测量低电阻电路、多谐振荡测量电容电路、辅助调平电桥电路、输出显示等电路。
Therefore, the high efficient MCU control system is introduced to improve the safety and reliability, and the new control method is an alternative for the high-pressure gas injection.
为此，本文提出为气驱增压泵加入高效的单片机控制系统，提高高压注气机操控过程中的安全性和稳定性，同时为高压注气机提供了一种新的控制方式选择。
The digital electronic ignition device was composed of 5 sections of MCU control circuit, digital circuit, light emitting diode display circuit, detection circuit and launching circuit.
数字式电子发火机由单片机控制电路、数字电路、数码管显示电路以及检测与发射电路5部分组成。
The proposal based on USB Host/Slave controller chip CH375A, realized a USB-Host embedded in CAN bus data acquisition system and stored acquisition data of each node in U flash disk under MCU control.
该方案基于USB主/从控制芯片CH375A，在单片机的控制下，实现了CAN总线数据采集系统中嵌入USB主机，从而完成把各节点采集的数据存入U盘，取代了现场数据采集系统必须有一台计算机的模式。
The design of The temperature control system based on MCU of is introduced in this paper.
本论文介绍了“基于单片机的温度控制系统”的设计及其相关内容。
The article provides a medium and small power photovoltaic control system based on MCU.
本文构建一种基于微处理器的中、小功率光伏控制系统。
At the same time using Holzer sensors will be converted into pulse frequency motor speed feedback to the MCU, realize the speed closed-loop control, to achieve speed detection.
同时利用霍尔传感器将电机速度转换成脉冲频率反馈到单片机中，实现转速闭环控制，达到转速检测目的。
The system achieves multi-channel temperature signal acquisition and control. Temperature limit is set by keyboard. The buzzer and relay are controlled by MCU.
本系统可以实现多路温度信号采集与显示，可以使用按键来设置温度限定值，通过进行温度数据的运算处理，发出控制信号达到控制蜂鸣器和继电器的目的。
With the two technologies and the flexible control ability of MCU, a new digital signal source, Arbitrary Waveform Generator (AWG), has been developed.
本设计结合这两项技术，并利用单片机灵活的控制技术，开发了一种新的信号源：任意波形发生器(AWG)。
Multipoint control unit (MCU) is the kernel of multipoint videoconference system. It offers the function of management and control for multipoint conference.
多点控制单元(MCU)是多点视频会议系统的核心，它提供多点会议的管理和控制功能。
Study on the stacker control system based on MCU.
堆垛机的单片机控制系统研究。
应用推荐