The optimization analysis result showed that the data of maximum deformation is acco...
优化后分析结果证明，机床结构的最大变形值都相应降低。
On the same stress, the maximum deformation of buried PSP pipe is smaller than the PE pipe.
相同受力条件下，埋地PSP管的最大变形值比埋地PE管小。
Maximum deformation and residual deformation are given by solving the systems of simultaneous equations.
通过求解建立的平衡方程组，给出了平台的最大变形和残余变形。
The relationship between heads relative displacement and sheets maximum deformation is deduced by circular function forming model.
通过圆函数变形模型，推导出两种典型零件成形中压头压入行程与板料最大变形量的函数关系。
It may solve the problems of maximum stress and maximum deformation of cantilever beams with variable cross section under arbitrary loads.
本文提供了一种求解变截面悬臂梁在任意载荷作用下最大正应力及最大变形的方法。
The results show that most of the maximum deformation appears in layers No. 1 and No. 2, and the deformation decreases greatly after being reinforced.
分析结果表明，边坡向斜南翼顺层滑移变形主要集中在第1,2层，采取相应的治理工程之后，边坡变形明显减缓。
The results indicate that the blade leading edge appears maximum deformation and maximum vibration amplitude, so that resonance is most likely to occur.
分析结果表明：本文压缩机叶片前缘区域受力变形最大、振动时振幅最大，进而发生局部共振的可能性最大。
According to the rules of the stress distribution, the maximum deformation of diaphragm spring and the minimum number of forced compression needed are proposed.
根据膜片弹簧工作过程中应力分布及变化规律，得到了强压时膜片弹簧变形量数值和强压所需次数。
Results show that with the increase of dropping height and repeated impact, the impact force, peak acceleration, maximum deformation and remaining deformation of apple increase.
研究结果表明随着跌落高度、跌落次数的增加，苹果冲击力、加速度峰值、冲击最大变形、冲击结束后的残余变形逐渐增大。
This model is represented in terms of a "damage index" which is a nonlinear function of maximum deformation and accumulated energy dissipation, and follows Weibull distribution.
此模型由一“破坏指标”表示，它是最大变形和累积能量耗损两个参数的非线性函数，其统计特性服从威布尔分布。
Optimization results show that the optimized box reduces the amount of maximum deformation of 15%, the maximal effect force is reduced by 22.5%, to improve the overall performance box.
优化结果表明，优化后箱体最大变形量减小了15%，最大等效应力降低了22.5%，提高箱体整体性能。
The thin vortex filament deforms three-dimensionally in the braid and generates stream-wise vortex structures which incline to the region maximum deformation direction of the flow field.
细涡丝在涡辫区的三维演化形成趋向流场最大拉伸变形方向的流向涡结构。
Based on the double control damage criterion and index of the linear function of the maximum deformation and cumulative hysteretic energy, the collapse of the SDOF structures is analysed.
基于最大变形和累积耗能线性组合的双重破坏准则及破坏指标，对单自由度结构进行了倒塌分析。
Rotational deformation of the shaft will produce maximum deflection.
转动的泵轴会弯曲变形，产生最大挠度。
Maximum impact force is the greatest impact force (in inch-lbs) applied that did not cause visible damage or deformation to the test specimen surface.
最大撞击力是指应用在测试样品表面上但没有出现肉眼可观测到损伤或变形的最大撞击力(单位：英寸磅)。
Due to cardiac deformation and blood flowing, weak edges, local gradient maximum regions and artifacts are found in the MRI images.
由于心脏的变形和血液的流动，MRI图像中出现了弱边界、局部梯度极大值区域、伪影等现象。
The maximum subsidence induced by mining bedding ore(such as coal seam) is an important parameter for estimating the degree of surface movement and deformation.
最大下沉值是度量层状矿体（如煤层）开采引起的地表移动变形程度的重要参量。
The delayed elastic deformation stage came later, the bend deflection increased more quickly, and breaking life shortened with the increase of the prolongation of the maximum load hold time.
随着最大载荷保持时间的增加，塑木复合材料进入延迟弹性变形阶段越晚，弯曲挠度增加越快，断裂寿命降低。
In the stamping and forming processes of automotive covering parts, only the maximum deformability, which is reachable in stable deformation stage of sheet metal, can be made use.
在汽车覆盖件的冲压成型中，可以利用的是板材在稳定变形阶段所能达到的最大变形程度。
Maximum plastic work principle is an important theorem for analyzing plastic deformation which is a foundation to calculate deformation force with energy method.
最大塑性功原理又称第二塑性变分原理，在致密体塑性变形分析中是运用能量法进行变形力能计算的基础。
Approximation of screwdown value, rolling speed and an iterative method were used to study the maximum screwdown ratio, speed, tension and deformation ratio tolerable in the mill.
作者用压下逼近法、速度逼近法及迭代法研究了该轧机允许的最大压下率、速度、张力和变形率。
The deformation of concrete was measured using WHY series full automatic testing machine when the maximum compressive stress was 80% of the compressive strength and repeated 5 times.
采用WHY全自动应力试验机测量了最大压应力为轴心抗压强度80%重复5次时混凝土的变形。
The inner maximum resistance force and the maximum stress of the specimen decreases as the deformation temperature increasing.
在形变速率相同的条件下，随变形温度的升高，试样内部最大形变抗力及最大应力呈下降趋势。
In this article, a novel method of maximum m value superplastic deformation (MaxmSPD) is presented.
介绍了最大m值超塑变形的新方法。
Finite Element Method is used to calculate the maximum bending moment and axial force of lining and its deformation.
利用有限元法计算了考虑衬砌接头和不考虑衬砌接头两种情况下衬砌的内力和衬砌的变形。
The finite element analysis of the wheel rail contact shows that the maximum stress under the subsurface exceeds first yield strength, which leads to plastic deformation.
在对轮-轨系统进行有限元分析的基础上，研究了轨道的受力情况和摩擦系数对应力分布的影响，讨论了轨道的弹塑变形和安定极限。
Deformation mode is adjusted according to forming limit diagram (FLD) and maximum springback error, so the optimized one can be found, which in turn optimizes the stretch bending trajectory.
根据成形极限图和规定最大回弹超差量来调整变形模式，找到优化的变形模式和拉弯轨迹。
Finally, locations of maximum stresses and deformation and their values are determined.
最后，提供了最大应力和最大变形所在的部位和数值。
After drying-balanced, the material carries on the strict stress test, to ensure the stability of the lumber, to reduce deformation risks of the floor product from the source in maximum degree.
对烘干平衡后的材料进行严格的应力测试，确保木材的稳定性，最大程度从源头减少产品地板变形隐患。
After drying-balanced, the material carries on the strict stress test, to ensure the stability of the lumber, to reduce deformation risks of the floor product from the source in maximum degree.
对烘干平衡后的材料进行严格的应力测试，确保木材的稳定性，最大程度从源头减少产品地板变形隐患。
应用推荐