The invention relates to a synthetic rubber material injection machine and an injection device thereof.
本发明是有关于合成橡胶材料注射机及其注射装置。
It is suggested that the combined injection and combustible waste material injection into BF, such as waste plastics and tyre, should be researched further.
建议进一步开展对复合喷吹的研究开发工作，以及开展对高炉喷吹废弃可燃物(如废塑料、废轮胎)的有关研究开发工作。
Objective: to compare the effect of different contrast-enhanced protocols and choose the optimal contrast material injection protocols for hepatic conventional ct and helical ct.
目的：比较不同注射程序对肝脏增强效果的影响，探寻常规ct及螺旋CT肝脏增强检查的最佳造影剂注射程序。
The suitcase is made from injection molded polycarbonate composite — the same material used in automobile bumpers — that provides superior impact protection.
箱子采用注塑成型的聚碳酸酯复合材料制造而成，该材料与汽车保险杠的制造材料相同，可提供很好的防撞保护。
The depot effect is not the only mechanism as Freund have demonstrated that the excision of the material at the injection site does not suppress the adjuvant effect.
贮存效果不是唯一的装置，象弗罗因德氏佐剂那样证明在注射处切除材料而不抑止佐剂效应。
The process of the injection molding is quite complicated because of the character of the material itself and the complexity of processing conditions.
由于材料本身的特性以及复杂的加工条件，塑料注射成型过程加工过程相当复杂。
According to the function and structure and dimension of junction box, the material capability and injecting technology were analyzed, the structure of injection mold was designed.
根据接线盒盒体的功能、结构与尺寸，进行了材料性能、注射工艺等分析，设计了注射模。
The general material balance equation was applied widely in the field, but few studies about material balance equation of gas injection flooding has been conducted.
常规物质平衡方程在油田已广泛应用，然而对油田注气物质平衡方程的研究较少。
D. The material - radian size and injection plastic machine nozzles radian match.
主进料口弧度尺寸与注塑机喷嘴弧度相配。
The fibre orientation of short fibre reinforced complex material in injection moulding was summarized.
阐述了短纤维增强复合材料在注射成型中纤维的取向问题。
After analysing the features of the structure of current coil skeleton parts and material formation, the paper introduces the injection die design method of this part.
分析了电流线圈骨架零件的结构特点及材料成型特点，介绍了该零件的注射模具设计方法。
This paper introduces the requirement of mould material and technology of circuit breaker handle, the location of runner and the determination of injection mould structure.
文中叙述断路器手柄塑件材料和工艺的要求、浇口位置的分析及合理确定注塑模具结构。
The influences of the rheological properties, injection content and delay time of gas injection on material distribution and gas penetration are investigated.
考察了材料流变性能、注射量和气体注射延迟时间对材料层厚分布及气体在熔体中穿透的影响规律。
So the equation is improved, then the material balance equation in the gas injection development for the condensate gas reservoir is obtained.
针对这种情况，将气藏物质平衡方程进行了改进，得到凝析气藏在注气开发方式下的物质平衡方程。
The key of the injection mold for lens was the design of the runner system, exhaust system, rigidity, the choice of proper material and correct heat-treatment.
镜片注射模设计的关键在于浇注系统、排溢系统、模具刚度的设计及模具材料的选择、热处理。
Injection process of machining technics demanding, the demand is higher, metal material strength relative to some low.
注射工艺苛刻、机加工工艺要求较高，相对于金属材料强度有些低。
In injection molding, plastic material gets loaded into a hopper and proceeds into a heated injection unit.
注塑成型，塑料材料被装入一个漏斗和收益进入了激烈的注射单元。
The basic concept of injection molding revolves around the ability of a thermoplastic material to be softened by heat and to Harden when cooled.
注射成型的基本概念是使热塑性材料在受热时熔融，冷却时硬化。
Polydicyclopentadiene (PDCPD) is a novel engineering material synthesized by reaction injection molding (RIM) method and such reaction mechanism is ring-opening metathesis polymerization.
聚双环戊二烯是采用反应注射成型工艺合成的一种性能优良的新型工程材料，是通过开环易位机理形成的聚合物。
The powder injection molding material is superior to conventional powder metallurgy method such as excellent mechanical strength, higher density and better surface finish.
粉末注射成形材料在机械性能、密度及表面粗糙度都比一般粉末冶金材料为好。
In view of some problems emerged in melting lose core process of low melting alloy in traditional lose core injection molding technology, a new type of water soluble lose core material was developed.
针对传统失芯注射成型利用低熔点合金熔融去芯时出现的问题，研制了一种新型水溶性失芯材料。
When water glass seriflux as chemistry injection material, its kinetic viscosity is varying with time, so the process of seriflux permeating in the sand is complicated.
水玻璃类浆液作为化学灌浆材料，其粘度在随时间变化，因此浆液在砂土中的渗流过程较复杂。
The transparent polypropylene (PP) special material for injection is prepared by adding nucleating agent to homopolymerized PP matrix.
以均聚聚丙烯(PP)为基体树脂，通过添加成核剂制备了注塑级透明pp专用料。
The influences of processing parameters, material properties and screw design on melt temperature distribution in reservior during injection moulding are described in this paper.
本文叙述了注射成型中加工参数、物料性能及螺杆结构对存料区熔体温度分布的影响。
Three-dimensional isothermal material flows in the metering section of injection molder with different screw heads during injection molding are simulated through POLYFLOW software.
针对头部无螺纹和有螺纹的注塑螺杆，使用POLYFLOW软件数值模拟了注塑机螺杆计量段熔料在注射过程中的三维等温流场。
However, the property of plastic material itself and the complexity of processing conditions make the process of the injection molding quite complicated.
然而，塑料材料的自有特性和复杂的工艺条件致使注塑成型过程相当复杂。
Toughened, heat stabilized, black polyamide 66 resin for injection molding. It is a high flow, processing friendly material.
增韧，热稳定，黑色尼龙66树脂注塑。它是一种高流动性，加工友好材料。
As for disadvantages, it requires a special nozzle and check ring to accommodate material coming back into the injection unit.
至于缺点，它需要一个特别的喷嘴和挡圈来容纳材料的回退。
We can learn from above that the study of material balance method during gas injection flooding is very important.
因此，研究注气开采过程中的物质平衡方程序具有十分重要的意义。
By special technology, the granule of phenolic molding material have smooth face and suit for injection molding.
通过专利技术使酚醛模塑料颗粒表面光滑，实现了注塑成型时加料的连续性和稳定性。
应用推荐