• This thesis does the main work as follows. Firstly discussed the simulation and the modeling relations, produces five essential factors of the modeling simulation.

    本文所做工作主要内容如下首先探讨仿真建模关系给出建模仿真的要素

    youdao

  • As a customer service engineer, the main work as follows: 1. The quality of the client state to collect, analyze unusual cause of the problem and feedback to promote the improvement of the factory;

    担任客服工程师时主要工作内容如下1客户端的品质状况收集异常问题原因分析反馈推动改善

    youdao

  • Since taking the post, I successfully complete all teller's work by strictly following accountant law and company finance administrative systems. My main achievement is as follows.

    以来三个月,本人严格依照会计法公司财务管理制度的规定,顺利完成了出纳的各项工作

    youdao

  • The main work is carried out as follows: 1. What causes the uncertainties of geotechnical parameters and some available methods for analysis and evaluation are described.

    全文主要工作如下1介绍了岩土工程参数不确定性原因一些采用分析评价方法

    youdao

  • The main work in the thesis are as follows: (1) Research on the representation of image boundary using chain code.

    本文的工作主要以下四个方面展开:(1)图象边界表示研究

    youdao

  • The main work is as follows: 1. Kinematics simulation modeling of the fruit picking robot.

    主要工作包括1果树采摘机器人运动学建模

    youdao

  • The main research work in this dissertation was outlined as follows: 1. A lighting device for capturing system of beef image was designed and produced.

    主要研究工作如下1设计制作了一个图像采集光照系统牛肉颜色自动分级系统获得准确牛肉颜色信息打下基础。

    youdao

  • This dissertation studied the existent problem of decision network planning based on fuzzy theory. The main research work is as follows.

    本文基于模糊理论决策网络计划存在问题以下几个方面进行了探讨

    youdao

  • Based on the researches on parallelization for serial programs, the main research work of this paper is as follows: Firstly, dependency analysis is the foremost task of parallelization.

    本文研究串行程序并行基础上进行如下工作首先依赖关系分析串行程序并行化的一个难点。

    youdao

  • The main work is as follows:(1) We design a source current module, a pattern-setting module, a measure module and a acquire module.

    主要内容如下: (1设计恒流模块激励测量模式设置模块、信号检测模块采集模块。

    youdao

  • The main work and production of the paper are as follows, (1) Long diameter saturated steam pipes belong to active thermodynamic objects.

    论文完成的主要工作取得成果如下: (1)大直径饱和蒸汽管道属于有源热工部件。

    youdao

  • The main work can be concluded as follows:1, Experimental method of the inner pore is found.

    基于此,本文对钙质砂颗粒及其孔隙做了一系列试验研究,主要工作包括1、确定内孔隙试验方法

    youdao

  • The main work can be summarized as follows: Firstly, by analyzing the ideal geometric relation in parallel CT system, the thesis presents a calibration method of geometric misalignment.

    首先本论文通过分析平行CT系统理想成像关系提出了一种适用于平行束CT系统几何失真校正方法

    youdao

  • The main work is as follows: (1) We adopt a serial modular design of configuration system.

    主要内容如下:(1)设计串联式模块化结构方案

    youdao

  • Centered around the subject, this paper mainly studies the theory and method of the geometric error evaluation, and the main work is as follows.

    为了开发误差评定系统,在形位误差评定理论方法进行了研究探讨,围绕课题本文主要进行了以下几个方面的研究工作。

    youdao

  • In this doctorial thesis, the main work finished is as follows.

    两年的试验研究中,归纳起来,主要开展了以下几项工作

    youdao

  • Main work and results are as follows. (1) According to the characteristics of remanufacturing network, the structure of an integrated remanufacturing product recovery network is built.

    主要工作成果如下(1)根据制造网络特征构建了集成式再制造产品回收网络的结构

    youdao

  • The main work and conclusions are as follows:(1) An experimental system consisting of raising, control, ignition, testing and data acquisition system was set up.

    主要工作结论如下:(1) 自行设计了一哈特曼粉尘爆炸实验装置系统

    youdao

  • The main work is summarized as follows: 1. The methods of extracting signals irradiated by HIFU are studied.

    主要内容有:1对HIFU辐照区信号提取方法进行了研究。

    youdao

  • The main work is as follows: (1) Analyze the reasons of driver fatigue and the behavior procedure of driving tiredly from the point of physiology and praxiology respectively.

    本文具体工作如下:(1)生理学角度分析驾驶疲劳产生的原因;从行为学角度分析了驾驶员的疲劳驾驶的行为过程

    youdao

  • The main work can be summarized as follows: modeling of the whole process, method of establishing product quality model, and developing the training system.

    主要研究内容分为流程动态数学模型建立、常压塔产品质量模型建立、仿真培训系统开发三部分。

    youdao

  • Sampling and separating performance of fly-ash was studied in this paper, and the main work and result are summarized as follows.

    本文就电厂燃煤飞灰取样分离性能开展研究主要工作成果总结如下

    youdao

  • The main research work is as follows. (1) The transverse vibration and stability of the axially moving uniform viscoelastic plate are investigated.

    具体研究工作如下。(1)研究了轴向运动厚度粘弹性矩形薄板横向振动稳定性问题

    youdao

  • In this paper, the main work of author are below as follows: radiation correction, atmospheric correction, geometric correction and data processing integration.

    本文主要对试验区遥感影像进行了辐射校正大气校正、几何校正数据融合等处理

    youdao

  • The main content is depicted as follows: Firstly, we study the history, current situation and future of our research, at the same time introduce the main work of this paper.

    主要工作包括以下几方面内容首先介绍研究工作历史现状未来本文主要工作。

    youdao

  • Main work, experimental methods and results were separately recounted as follows.

    主要工作研究方法结果分别叙述如下

    youdao

  • The main work is as follows. 1. Cascade models of nodes are studied.

    论文的主要研究工作如下1节点相继故障模型研究。

    youdao

  • The main work and achievements are listed as follows:1) Self-turn-off pulse-width modulation for OLED gray-scale controlling.

    主要工作包括以下几个方面:1)自关闭调制灰度控制系统

    youdao

  • The main work and achievements are listed as follows:1) Self-turn-off pulse-width modulation for OLED gray-scale controlling.

    主要工作包括以下几个方面:1)自关闭调制灰度控制系统

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定