Optimization method was used in the design of the spiral bevel gear of the main reducer.
采用优化的方法设计了主减速器螺旋锥齿轮。
Automotive drive axle of the main reducer and differential assembly is a key automotive power train components.
汽车驱动桥中的主减速器及差速器总成是汽车传动系的关键部件。
This system can be developed rapidly design required main reducer arc of spiral bevel gears of 3d model and basic parameters.
应用此系统可以迅速设计开发出所需要的主减速器圆弧螺旋锥齿轮的基本参数和三维模型。
Cracks frequently generated in basin gear of big modulus main reducer used in heavy load truck after carbonizing and quenching.
大模数重载汽车主减速器盆形齿轮经渗碳淬火后，齿轮齿面经常会出现裂纹。
The results of the paper is beneficial to improve the assembling quality of main reducer and to control pre-tighten purpose of the axle.
本文结果有益于提高主减速器装配质量和控制轴承预紧效果。
And commissioning follows no load debugging of every system as main reducer lubrication system, roller mill pressure station and roller lubrication system.
磨机负荷试运行阶段，主要探索使系统稳定运行的系统风量、磨机压差、入磨气体压力等工艺参数的控制。
Theoretical research and experimental results of this paper illustrate that the gear assembly adjustment is an important factors of impacting vibration and noise of the main reducer.
本文的理论研究和实验结果都说明了齿轮的装配调整是影响主减速器振动和噪声大小的重要因素。
The optimum design method and basic principles of main reducer of rotary blast hole drill are discussed, The main reducer is taken as a whole and is optimized by discrete Complex method.
论述了牙轮钻机主机构减速器的优化设计方法和基本原理，以主机构减速器作为整体进行优化，采用离散复合形算法。
The cause of cracks after brush-plating on the main speed reducer of helicopter was analyzed and the ameliorative measures by shot-peening were brought forward consolidation.
分析了直升机主减速器齿轮电刷镀修复后产生裂纹的成因，通过试验提出了喷丸强化改进措施。
The rationality and reliability of main hoist reducer adopted with double spiders structure for large bridge crane are introduced.
介绍了设计大吨位双钩桥式起重机主起升减速器采用双行星轮结构的合理性和可靠性。
This paper presents main parameters, technical specifications and characteristics of the DQJ point-line meshing gear series reducer.
介绍了DQJ点线啮合齿轮减速器系列的主要参数，技术指标及其特点。
The main products are: Blower, the Cupola, pouring equipment, reducer, discus machine, cleaning equipment, Mixer equipment, dust removal equipment.
主要产品有：鼓风机、冲天炉、浇注设备、减速机、铁饼机、清理设备、混砂设备、除尘设备。
The speed reducer upper on the main machine makes central axis rotate through shaft coupling and roller hanger rotates with central axis and rollers on the hanger roll around the inside of ring.
安装在主机顶部的减速机，通过联轴器连接中心轴旋转，中心轴带动磨辊吊架旋转，磨辊装在吊架上沿磨环内周一起滚动。
My company's main products are ZY reducer.
我公司的主要产品是ZY减速机。
Main products: vessel gear case, hydraulic pressure clutch, hydraulic pressure double and branch driver, timing clutch, reducer, vacuum pump etc.
主要产品有：船用齿轮箱、船用辅机、液压离合器、液压离合分动箱、液粘调速离合器、减速机、真空泵等。
The main drive of the whole line uses a reducer with the frequency conversion to control, the speed control, length setting and the localization control are accurate and reliable.
整线成型主驱动采用一个减速电机加变频控制，速度控制、定长、定位控制准确可靠。
Our main products: reducer, gear motor, bevel gear, worm - gear motor, cycloidal reducer and variator.
公司主要产品有：齿轮减速机；蜗轮蜗杆减速机；螺旋伞齿轮减速机；摆线针轮减速机及无级变速器。
There are two class screwing gear reducer and electromotor in the base of main machine. The powder classifier is equipped on the top of grinding chamber.
主机机座内装有二级螺旋齿轮减速器与电动机，涡轮式选粉机装在磨腔壳体上部。
Our main products: reducer, gear motor, bevel gear, worm-gear motor, cycloidal reducer and variator.
公司主要产品有：齿轮减速机；蜗轮蜗杆减速机；螺旋伞齿轮减速机；摆线针轮减速机及无级变速器。
The article describes the main drive gear reducer structure at finishing mill area of strip hot continuous rolling plants.
简要介绍带钢热连轧机精轧区主传动减速机的结构特点。
In this paper, the reducer in the main drive system of the rolling mill has been diagnosed successfully by using vibration intensity method and frequency domain analysis method.
利用振动烈度和频域分析方法，对轧机主传动系统减速机进行了故障诊断。
For example, the main driving axle reducer seal assembly technical requirements: input flange oil seal centerline hole of the center line of the small eccentricity of more than 0.1mm.
例如驱动桥主减速器油封的装配技术要求：输入法兰中心线对油封座孔中心线的偏心度小得超过0.1mm。
This article is of a design for portable type wheat cropper. The main structure of wheat cropper is composed of engine, drive system, clutch, reducer, operation device and side hanging belt, etc.
本题目完成了一种便携式小麦收割机的设计，小麦收割机主体构造由发起机、传动系统、离合器、加速部件、操纵安装和侧挂皮带等组成。
The main bearing and each dial are driven by electromotor of main machine through reducer, and Numbers of roller which are rolling in the ring, which are driven by dial through plunger.
主机电动机通过减速器带动主轴及各层转盘旋转，转盘通过柱销带动几十个环辊在磨环滚道内滚动并旋转。
Breaker This breaker by the electrical machinery, the speed reducer, turns limits the shaft coupling brokenly, the breaker fixed plate, the breaker rotor plate, the main axle is composed.
破碎机本破碎机由电机、减速机、扭限联轴器、破碎机座、破碎机定片、破碎机动片、主轴组成。
Breaker This breaker by the electrical machinery, the speed reducer, turns limits the shaft coupling brokenly, the breaker fixed plate, the breaker rotor plate, the main axle is composed.
破碎机本破碎机由电机、减速机、扭限联轴器、破碎机座、破碎机定片、破碎机动片、主轴组成。
应用推荐