The electronic let-off and electronic take-up system USES RS485 and CAN BUS to communicate with the main control system of a loom.
采用了RS485和CAN总线接口，实现了电子送经卷取控制系统和织机主控制系统之间的通讯。
By the analysis of the system structure, the main control system and the electromagnetic vibration feeding control system are designed and implemented.
经过对系统结构的分析，设计并实现了系统的主控制系统和电磁振动给料控制系统。
This injector integrates mechanism branch system, implement branch system, electro-circuit of control driver, PLC branch system, and main control system.
机械子系统、执行机构子系统、控制驱动电路子系统、P LC控制子系统和主控端。
The main control system includes the synchronous signal generating circuit, the testing circuit of thyristor cut-off voltage and the trigger circuit of the thyristors etc.
论述了主要硬件电路的设计方案，其中包括晶闸管两端电压检测、三相电源同步信号检测等。
The digital signal processor (DSP) TMS320LF2407 and the complex programmable logic device (CPLD) EPM7256E are used as the main control system and the drive module is also designed.
设计了一种交流电机控制系统用于水处理过程控制，采用数字信号处理器TMS320LF 2407配合复杂可编程器件EPM 7256e构成主控系统，并对驱动模块进行设计。
This paper related the innovation of the calendaring production line provided from Taiwan, consisted of the main control system of PLC and remote I/O, set up man and machine conversation interface.
原台湾产压延生产线故障率高，对其进行全面改造。主控系统采用主从PLC和远程I/O的控制方式，并设人机对话界面。
The system operator has three main functions : transfer (inter-regional and international transit), process control and balance of the electric power system.
系统操作器有三大主要功能：传送（地区间和国际中转）、程控和电力系统平衡。
In a number of high reliability control system, which is often the main reason for limiting their application.
在一些要求高可靠性的控制系统中，这往往就是限制其应用的主要原因。
This paper introduces a familiar kind of computer control system for convolute product line, and discusses its composition, main function and implementation method.
本文介绍了一种常见的卷绕生产线计算机控制系统，阐述了系统的构成、主要功能和实现方法。
While extranets and intranets have a lot in common, the main difference between the two is that in the case of extranets, some parties using the system are out of the enterprise's control.
外特网和内特网在有很多共同之处的同时，两者间的一个主要差别是，在外特网中有些使用该系统的单位不受企业的控制。
The third part of the main emphasis on the second part of the risk control can also be said to be a system build.
第三部分主要强调对上述第二部分的风险的控制也可以说是一种制度的构建。
For design of STATCOM device the different control method and main electric structure can be selected according to different requirements for system and control targets.
在设计STATCOM装置时，可根据系统要求的不同，控制目标的不同，选取不同的控制方法和主电路结构。
Among them the control system of hardware has introduced the peripheral circuit including main chip mainly, the module the signal gathers and the motor driving module.
其中硬件控制系统主要介绍了包括主芯片的外围电路，信号采集模块以及电机驱动模块。
SNC has finished wind tunnel testing and conducted some main propulsion system and reaction control system tests.
SNC已完成风洞测试，并进行了一些主推进系统、反应控制系统的测试。
The main aim of this thesis is to study and implement the digital control system for magnetic bearing.
本文以有源磁轴承的数字控制系统为主要研究对象。
The SCADA technique which is used in the solution of urban gas network's control and scheduling management automation and system main functions is introduced.
介绍了利用SCADA技术实现城市燃气管网监控、调度管理自动化的解决方案及系统主要功能。
TMS320F240 digital signal processor that is selected as the main CPU in the system realizes the full digital vector control system.
论文中选用TMS320F 240数字信号处理芯片作为系统的主控芯片，实现了全数字化的直接磁场定向的矢量控制系统。
Therefore, the idle control system based on FAI's EFI system is the main research issue in this paper.
因此，本文将研究基于FAI电控技术的摩托车怠速控制系统。
This paper expounds the design idea and main contents of construction control system in Self-anchored Suspension Bridge with different girder stiffness.
本文系统地阐述了不同主梁刚度的自锚式悬索桥施工控制系统的设计思路和主要内容。
So, the thesis adopts a type of low loss DSP processor as main controller which composing the control and fault feeder detection system based on DSP in order to deal with the question.
因此论文采用了低功耗的数字信号处理器作为主控芯片，构成一种基于数字信号处理器的控制与选线系统。
Reaction wheel is one of the main disturbance sources for the attitude control system accuracy of spacecraft.
反作用轮是影响航天器姿态控制系统精度的主要扰动源之一。
The hydraulic jack generally by this aircraft (main engine), the dynamic system and the hydraulic control system three parts is composed.
液压千斤顶一般由本机(主机)、动力系统及液压控制系统三部分组成。
The main steam pressure control system, bed temperature measure system, bed temperature adjust system and action condition of main fuel trip (MFT) are analyzed.
对主蒸汽压力控制系统、床温测量系统、床温校正系统和主燃料跳闸的动作条件进行了详细的分析。
LED control system needs to communicate and integrate with the main lighting system control.
LED的控制系统需能接入整个照明控制系统并实现统一控制。
LED control system needs to communicate and integrate with the main lighting system control.
LED的控制系统需能接入整个照明控制系统并实现统一控制。
应用推荐