Meanwhile, in the main circuit structure, the use of LCL filter, improved high frequency switching harmonics suppression.
同时，在主电路结构中，采用LCL滤波，改善了对高频开关谐波的抑制。
The main performance, interior structure, working principle and application circuit of MAX7033 are introduced in detail.
介绍了MAX7033的主要技术性能、内部结构、工作原理和应用电路。
Designs on motor field and structure, controller main circuit current commuting mode design, TMS320F240 least system and system program consider system normal operation under fault condition fully.
电机场路结构设计、控制器主回路换流模式设计、TMS320F 240最小系统设计、程序设计充分考虑了故障应急状态下系统正常运行必要条件。
The design of main power sources structure, the control circuit for welding tractor and wire feeder, SCM control circuit and software for welding process are introduced in detail.
对该焊机的主电源结构、小车行走控制电路、送丝电路、单片机控制电路以及焊接过程控制软件等的设计作了较详细的介绍。
This paper discusses the system testing principle, general structure, main function, chips, hardware circuit design parameters, software design process.
本文论述了系统的检测原理，总体结构，主要功能，芯片的参数，硬件设计电路，软件设计流程。
The voltage transformation rectification integration power supply units with high-power homemade silicon element was introduced, including main circuit, structure and application effect.
介绍了国产大功率硅元件变压整流一体化电源装置的主电路、结构及应用效果。
The main research area is the structure optimization of floating-point adder , which is intent to minimize the delay of floating-point addition and optimize the circuit structure.
主要研究方向是优化浮点加法器结构，减小浮点加法运算的延迟，优化电路结构。
The main research area is the structure optimization of floating-point adder, which is intent to minimize the delay of floating-point addition and optimize the circuit structure.
主要研究方向是优化浮点加法器结构，减小浮点加法运算的延迟，优化电路结构。
On the structure of system, the three-level converter of three phase bridge of the equipment in main circuit is built with IPM module based on IGBT, and its controller is made up of double CPU.
在系统结构的实现上，该装置的主电路采用基于IGBT的智能模块IPM构成三相桥三电平变流器；
The structure and theory of main circuit, control circuit and protection circuit of modularized charge power supply composed by IGBT high frequency switch tubes are introduced in this paper.
介绍了利用高频开关管IGBT构成模块化充电电源的主电路、控制电路及保护电路的结构、原理。
It also introduces the working principle of the SCR adjusting voltage circuit and the starter's main circuit, the hardware structure and functions of the soft starter and the software program design.
阐述了晶闸管调压电路及软起动器主电路的工作原理、软起动器的硬件结构和功能以及软件设计。
The circuit design and structure of single phase bridge voltage inverter are presented in detail. The main experimental waveforms are given.
对单相桥式电压型变频器的线路设计及结构作了较为详细的介绍，给出了主要实验波形。
This paper carries out the analysis of dynamic characteristics for hydraulic circuit of the brake, and puts forward the criterion of structure design and main parameters in hydraulic system.
本文对制动器液压油路进行了动态特性分析，并提出液压系统主要参数和结构设计的准则。
The main structure of power supply, working principles of main circuit and control circuit are described in brief. At the same time, the software of the system is explained.
就其电源的主体结构，主电路的原理及控制电路的工作原理作了简要的论述，同时对系统的软件也进行了简要说明。
The inverter versatile arc welding machine is introduced. The structure of the main circuit is made up of MOSFET and ferrite magnetic core.
介绍了一种主电路采用MOSFET和铁氧体磁芯构成单端正激的逆变式多功能焊机；
This paper introduces an active power filter device used for three phase four wire. The compensation principle and structure of main circuit and control circuit are given.
主要介绍用于三相四线制的有源电力滤波装置的研究工作，给出了系统的基本补偿原理、主电路及控制电路结构，并利用该装置进行了补偿实验。
The structure of main circuit and the control circuits and the relative calculations are also given.
同时给出了主电路、控制电路、主要参数的计算方法及相关波形。
The resonant soft switching inverter arc welding power source uses LCL type structure in the main circuit, and selects phase shifting pulse wide modulation technique in the control system.
研制的谐振式软开关弧焊逆变电源，主电路采用新型LCL结构，控制系统选用恒频移相调脉宽控制方案。
The structure and component of the IGBT inverter type welding power source are introduced in the paper. The welding power source include main circuit, control circuit and protect circuit.
论文介绍了IGBT逆变焊接电源系统的结构和组成，整台焊接电源包括电源主电路、控制电路和保护电路。
The feeder circuit meets the demands of modular structure, and it can meet the needs in synchronism with the main control circuit.
该送丝电路符合模块化的电路设计思想，能够较好的与数字化主控电路实现同步。
Main circuit adopts the AC-DC-AC structure and uses IPM(Intelligent Power Module) as main switch.
主电路采用交—直—交电压源型变频器，功率器件采用智能功率模块IPM。
Firstly, the main structure of the control system was designed, and some of the hardware circuit was shown.
首先，对机器人控制系统的总体结构进行了设计，并给出了部分硬件电路的具体实现方法。
Based on their analysis and design, identified a simple circuit structure after the first stack filtering programmes, as a practical subject used by the main circuit.
通过对它们的分析与设计，确定了电路结构较简单的先叠加后滤波方案，作为课题实际所用的主电路。
In the study of, I introduce the the basic structure of the Frequency Control System, and tell something about how I use intelligent IGBT module IPM to produce the Frequency Control main circuit.
在研究变频调速系统的基本结构中，对变频调速系统的基本结构，以及如何利用IGBT智能模块IPM实现变频调速主电路的进行了介绍。
The paper gives detailed explanation of the compensatingtheory, operating pattern of the main circuit, structure of the control system as well as its control strategy.
详细叙述了补偿器的补偿原理、主电路工作方式、控制系统的结构及其控制策略。
This paper gives a detailed introduction on mechanical structure, hardware and software design, meanwhile, present a part of circuit diagram as well as the main program flow chart.
详细介绍了锁的机械结构、硬件设计方案和软件设计方法，并给出了部分电路图和程序主要流程图。
This paper gives a detailed introduction on mechanical structure, hardware and software design, meanwhile, present a part of circuit diagram as well as the main program flow chart.
详细介绍了锁的机械结构、硬件设计方案和软件设计方法，并给出了部分电路图和程序主要流程图。
应用推荐