Reasonable tool path can improve machining accuracy and machining efficiency.
合理的刀具轨迹可以提高加工精度和加工效率。
Holes machining Path Planning is significant to improve the machining efficiency and quality of multi-hole parts.
孔群加工路径规划对于提高多孔类零件的加工效率和质量具有重要意义。
There are many steps for machining complex parts on a machining center, and the operating sequence directly affects machining quality and machining efficiency.
在加工中心加工复杂零件时，工步多，其顺序直接影响加工质量和生产效率。
The calculative precision of the cutting breadth has a significant effect on the machining precision and the machining efficiency for free-form surface machining.
在自由曲面加工中，行距的计算精度直接影响着曲面的加工精度和加工效率。
Practice proved that the nc machining of hydraulic turbine blades features high machining efficiency and high accuracy, and dramatically improves the machining quality of turbine wheels.
实践证明，水轮机叶片数控加工工艺方法具有加工效率高、精度高等优越性，使转轮加工质量大幅度提高。
The interpolated precision and the NC machining efficiency are improved.
算法简便先进，能够提高插补精度与数控加工的效率。
It is mainly used as an additive to improve lubricity, demould properties and machining efficiency.
本品主要作为添加剂，改善制品的内外润滑性、脱模性和光洁度，提高加工效率。
The test indicates this means may heighten machining efficiency and quality remarkably in nc machining.
试验表明，该方法可显著提高数控加工效率与加工质量。
The operation is simple, the machining quality is easy to be ensured, and the machining efficiency is high.
操作简单，加工质量易于保证，加工效率高。
The experimental results show that the proposed algorithm can improve machining efficiency and surface quality.
试验结果表明，该算法可有效地提高自由曲面的加工效率和表面加工质量。
Specification of optical backing plate technical condition directly affects its performance and machining efficiency.
光胶垫板技术条件的给定，直接影响到光胶垫板的使用性能和加工效率。
The amplitude and the way of tension play an important role in machining quality, machining efficiency and wire breakage.
张紧力的大小和张紧方式对加工质量、效率和断丝有重要影响。
However, with the depth increasing, the speed of processing declined sharply, which would lead to the low machining efficiency.
然而随着加工深度增加，其加工速度急剧下降，对于大深径比的孔加工，效率极为低下。
By using this algorithm, more material can be removed in one step of machining, and therefore, machining efficiency is improved.
在此基础上提出了一个刀具势态优化的新方法，从而使五轴加工的效率得到进一步提高。
Also, in some conditions electrically the machining efficiency of conductive CVD diamond is higher than that of copper electrode.
且在某些条件下导电CVD金刚石电极的加工效率优于铜电极。
The mathematic models of machining efficiency and wear of cutter were founded by analysis of regression about experimental results.
通过回归分析，建立了切削效率和刀具磨损率的数学模型；
Machining experiments are carried out to investigate the effect of electrode's vibration frequency on machining efficiency and diameter of holes.
实验研究了加工过程中电极激振的频率对加工效率、加工孔径的影响。
As the electric medium, electrolyte is the main factor, which affects the machining efficiency, machining precision and surface quality of workpiece.
电解液作为电解电流的导电介质，是影响加工生产率、加工精度及工件表面质量的主要因素。
The software is combining ladder diagrams and sequence fuction chart (SFC) for realizing automatic control of pipe bender to enhance machining efficiency.
软件由梯形图和SFC图相结合，实现对弯管过程的自动控制，提高了加工效率。
Cutting tool's structure, especially its tool edge preparation, becomes one of the key factors that influence the tool life and improve machining efficiency.
刀具刃口钝化结构成为保证刀具寿命、提高加工效率的一个十分重要的因素。
The test of the whole system has been fulfilled. The results demonstrate that the employment is very effective for enhancing machining efficiency and quality.
最后进行了加工实验的验证，其结果表明系统的加工效率得到较大提高，且改善了加工质量。
Technology of thermohydrogen treatment(THT) for free-cutting of titanium alloy is able to improve the machinability and machining efficiency of titanium alloy.
钛合金易切削热氢处理技术是通过对钛合金进行热氢处理，改善其切削加工性能，提高机加工效率。
On the basis of improving cutting-tool angle and operating method, the machining efficiency is raised, the difficulties in processing inside whorl are also solved.
通过改进刀具角度及操作方法，提高了加工效率，解决了内螺纹加工的难点。
It can be used to spin form parts of different shapes and is characterized by a high machining efficiency, low labor intensity and requiring no metal cutting ope...
它可以旋压各种不同形状的零件，具有加工效率高、劳动强度低、无须进行切削加工等特点。
Therefore, the shortest tool path made out is realized during manufacturing of plentiful features, thus machining time is shortened and machining efficiency is increased.
实现了加工多个特征时所规划的走刀路径最短，缩短了走刀时间，提高了加工效率。
Also the new technology of finish machining for pipe die has been established, the approaches to increase the machining efficiency of the pipe die have been raised as well.
制订了新的管模精加工工艺，并提出提高管模产品加工效率的途径。
The machining efficiency was studied, which shows that from the aspect of improving the surface quality, the efficiency of powder-mixed EDM is very high. From the electrode…
对于这一工艺的加工效率进行了剖析，认为从改善表面质量的角度来看，混粉电火花加工具有很高的加工效率。
The machining efficiency was studied, which shows that from the aspect of improving the surface quality, the efficiency of powder-mixed EDM is very high. From the electrode…
对于这一工艺的加工效率进行了剖析，认为从改善表面质量的角度来看，混粉电火花加工具有很高的加工效率。
应用推荐