The grinding heat is the important factor when the forfex is machined with gringing wheels.
砂轮磨削刀剪的过程中产生的磨削热是一个重要因素。
Sparkplug and machined retaining nut.
火花塞和加工保留螺母。
Head and cap are machined from aluminum alloy.
头部和上限从铝合金加工。
All the parts were machined to the specification.
所有部件都按照规格予以加工的。
Behold the ultimate in armors-Machined Platemail.
见识一下这种终极装甲——“机械战甲”。
I machined the cuffs, but the collar was done by hand.
我用缝纫机缝了袖口，但领子是用手缝的。
Protect all machined and lapped mating surfaces from damage.
保护所有零件表面避免损害，如有刮伤须研磨。
Most of it consisted of the above-mentioned ditto-machined notes.
其中大部分是上面提到的复印笔记。
The axial roller rows have machined cages or polyamide separators.
轴向滚子具有机制的保持架或者聚酰胺分离器。
It also introduces the machined surface quality using PCBN cutting tool.
同时也介绍了PCBN刀具的加工表面质量。
Disc– machined seating surface is mated to seat ring for positive shutoff.
阀瓣-机加工阀座表面，配置阀座环，实现积极有效的关闭。
Head and cap are machined from 304 stainless steel for corrosion resistance.
头和加工上限从304不锈钢的耐腐蚀性。
Lager dies are usually roughed out, then stress-relieved and finish-machined.
大型模具一般先粗制毛坯，然后应力消除，再进行成形加工。
Depth of cut, d, is the normal distance between the unmachined surface and the machined surface.
切削深度d是未加工面与已加工面之间的垂直距离。
The facing is deposited on the plug and body seats and is then machined to a mirror-like surface.
阀塞和阀体阀座表面先由沉积层形成，然后经过机加工制成镜面光洁度表面。
Pete says he machined the needed parts that he could not get from another tricycle and a recumbent.
皮特说，他加工所需的零件，他不能从另一个三轮车和卧位。
It is further shown that the cutting direction has a remarkable effect on the machined surface quality.
进一步指出，当切削方向背离破坏区扩展方向时，能得到较好的已加工表面质量。
They are axially guided by the axial sliding areas of the cage or by the lips of machined bearing rings.
它们通过保持架的轴向滑动区或加工过的轴承圈挡边轴向的引导。
The hands are cut out and then stuck to the disc and machined by two successive diamond polishing operations.
将制作成型的指针黏在圆盘上，然后用机器进行连续两次的钻石抛光工序。
Machining and tooling inspectors inspect machined parts and tooling in order to maintain quality control standards.
加工和模具检察员检查加工零件和模具，以保持质量控制标准。
Lead in solders for the soldering to machined through hole discoidal and planar array ceramic multilayer capacitors.
通孔盘状及平面阵列陶瓷多层电容器焊料所含的铅。
The workpiece has an accurately machined bore, and is located from the bore and the end face, from a cylindrical post.
此工件有一精确机加工的大孔，因此通过一圆柱体采用该孔和工件端面定位。
Green CONTROL NUMBER: Numerical system, which is used in the scheduling of product to be green machined and carburized.
毛坯件控制号码：是产品进行毛坯加工和渗碳处理时所用到的号码系统。
If it is necessary, the new location features must be machined as a result of location from the former location features.
如果必要的话，新的定位要素必须作为先前的定位要素的定位结果来加工。
This echoes from its new high-fidelity machined chassis, representing the most exacting manufacturing process of any laptop made today.
这些从它全新的高保真的底板整体加工就能得到印证，它是当今笔记本电脑最严格的制造工艺的代表。
Machined in their Vancouver facility, these feature a 4 mm cross section as opposed to the standard 3 mm found on most other rings.
在温哥华的设施，这些功能一4毫米截面加工，而不是标准的3毫米的大多数其他戒指找到。
Machined in their Vancouver facility, these feature a 4 mm cross section as opposed to the standard 3 mm found on most other rings.
在温哥华的设施，这些功能一4毫米截面加工，而不是标准的3毫米的大多数其他戒指找到。
应用推荐