This paper introduces the operational principle, composition and features, the software design and etc. of the automatic temperature control system of disinfect machine.
介绍了消毒机温度自控装置的工作原理、组成及其特点和软件设计等。
The paper introduces the composition and the working axiom of rainbow metal roof's make-up machine, and the working axiom of the hydraulic system.
介绍了彩虹金属屋顶成型机的构成、工作原理，通过系统原理图介绍了液压驱动系统的组成、工作原理及特点。
Based on an analysis of the composition of drilling rig, characteristics of drilling process, and human features, a reliability model of man-machine control system for drilling process is established.
在全面分析钻井机械的组成、钻进过程的特点和人的特性的基础上，建立钻机钻进过程人机系统可靠性模型。
The composition, working principle and control arithmetic of a high - speed aviation engine clutch bearing test machine is introduced.
介绍了一种高速发动机离合器轴承试验机测控系统的组成、工作原理和控制算法。
To make use of dimension chain principle in comprehensive and accumulated analysis of element parts size and error is an important composition part for quality analysis in machine building.
利用尺寸链原理对机器零部件尺寸及其误差进行综合与累积，是机器制造中质量分析的一个重要组成部分。
The structure composition of sanding machine was introduced. The main factors affecting sanding effect and reasons of common defects were analyzed, and solutions were also presented.
简单介绍磨毛机的组成结构，就影响磨毛效果的主要因素进行了分析；对常见的磨毛疵病原因进行分析，提出了解决措施。
General construction, composition, functions and applied characteristics of improved and developed automatic hydraulic bar binding machine are briefly introduced.
简要介绍了改造研制的棒材全自动液压打捆机的总体结构、组成、功能及其应用特点。
The structure, composition and the formation method of a new type NC cloth tape winding machine are introduced in detail.
详细地介绍了一种新型数控布带缠绕机的结构、组成及实现方式。
This article introduces working principle and features of electronic switch machine, and gives the hardware and software composition of the testing system.
介绍转辙机试验台检测系统的工作原理及性能特点，给出检测系统的硬件和软件构成。
By analyzing the labor, material, machine and the price composition for steel plate pasting, the paper makes a study on how to calculate the cost of steel plate pasting with supplementary quota.
文章通过对粘贴钢板的工、料、机、价格构成分析，探讨如何编制补充定额计算粘贴钢板的造价。
Abstrct:The composition of on_line balance system for the rotor of cold & warm wind curtain machine is introduced. Calculation & procedure of rotor balance is given.
介绍了冷热风幕机转子在线平衡系统的组成，给出了转子平衡计算及程序。
To introduce the design method, composition and main study content of "Aid-decision System of Heavy Machine Gun System of Approval Test".
介绍了重机枪系统定型试验辅助决策系统的设计方法、组成和主要研究内容；
The application of PLC control system in the control system of thermo plastic flooding machine is introduced, the composition and its software design are also described.
介绍了P LC软件电动控制系统在热塑机设备控制系统中的应用，对系统的组成及软件程序设计作了阐述。
The structure characteristic, composition and structure design of the hydraulic support on the silt coal load machine was introduced.
介绍了矿用淤煤装载机液压支撑部分的结构特征、组成及结构设计。
The design principle, basic composition and implementing method of tension control system of digital control fiber winding machine are described.
主要论述了数控纤维缠绕机张力控制系统的设计原理、基本构成及其实现方法。
The quantity, composition and morphology of debris in machine oils are a reflection of wear modes and degrees of engine parts.
滑油中磨粒的数量、成分和形态反映着机器零部件的磨损形式和磨损程度。
Described are the functions, structure composition and the design method for various parts of the multi-purpose electro-hydraulic wheel drop machine for passenger cars.
介绍了客车多功能电动液压落轮机的功能、结构组成及各部分的设计方法。
The basic composition, construction, working procedure and characteristics of the machine are introduced. Some problems that may be encountered in the application of the machine are also discussed.
介绍了该分装机的基本组成结构、工作流程和特点，并论述了在实际生产应用中可能遇到的问题及解决措施。
Knowledge about mechanical, electrical and electronic composition of the machine, with Gear machine Tools operation, maintenance or application experience is preferred.
具备机床机械电气及电子元器件相关知识，有齿轮加工机床操作、维修或应用相关经验。
This paper introduces the hardware circuits and software composition of the 8031 single-chip computer that controls the electronic scales of the powder-jet drilling machine.
本文介绍控制粉喷桩机电子秤的8031单片机系统的硬件电路及软件组成。
Methods: GC-MS machine was used to analyze the chemical composition in volatile oils.
方法：利用GC-MS气质联用仪对香附炮制前后的挥发油进行成分分析。
Traditionally, tobacco companies look at the chemical composition of tobacco and the smoke it produces when drawn through a "smoking machine" to assess its potential for harm.
传统上，烟草公司通过研究烟草和由“吸烟机”产生的烟雾的化学成份来评价香烟的潜在危害。
The article introduces the raising process, composition of raising machine and its the variable speed dive control system. Multi-motor drive of raising machine's feature is highlighted.
本文简介了起毛工艺、起毛机的构成，起毛机变频调速控制系统，重点介绍了多电机传动的起毛机传动的特点。
In this papers, the composition of forging and rolling machine roll sleeve is scientifically designed, the centrifugal casting and heat treatment process of roll sleeve are researched.
对锻轧机辊环的化学成分进行了科学设计，对辊环的离心铸造工艺、软化退火工艺、淬火工艺和回火工艺进行了深入研究。
The all digital and multi-function queue machine is designed. The composition and primary characteristics are introduced in detail, and the operating principle is analyzed and discussed.
对数字排队机的组成和主要特点作了较为详细的介绍，并对其工作过程进行了分析和讨论。
The elements and the whole sets of construction design of the automatic steel-pipe electric welding machine were introduced. The composition of hardware and software of the systems were also designed.
介绍了其焊接原理及整机的构造设计方案，并给出了焊接过程控制系统的硬件构成和软件结构。
The chemical composition and heat treatment process of roller for R73 continuous casting machine have been introduced in this article.
介绍了我公司生产的R73连铸机辊子的化学成分和热处理工艺。
The design of the double wheel system for YMZ type silt coal loader machine was introduced, including wheel, wheel axle structure composition, technical parameter and characteristic.
介绍了YMZ淤煤装载机轮对系统的设计，包括车轮，轮轴的结构，技术参数及特征。
The paper describes briefly the composition and function of the silicon rectifier control system as well as the program for achieving control functions and design of man-machine interface.
简要介绍了硅整流控制系统的组成、功能，实现控制功能的程序和人机界面的设计。
Moreover, we present a new and efficient method suit to design stepwise controller just like those in this paper, which is called the decomposition and composition of a finite state machine.
此外，在控制器的设计中提出了一种新的方法—有限状态机的分解与合成，该方法灵活有效，且设计简单，尤其适合设计步进式状态机。
应用推荐