As the lightest constructional material, magnesium alloy has high specific strength, high specific stiffness, good magnetic-shielding ability, good damping ability, and good machinability.
镁合金是比重最轻的结构材料，具有高的比强度、比刚度和良好的磁屏蔽性、阻尼性、切削加工性等优点。
增加机械加工性能。
Their machinability is similar to that of stainless steels.
它的可机加工性和不锈钢相同。
Tool steels are normally spheroidized to improve machinability.
工具钢通常要用球化来提高切削性。
An excellent machinability can be obtained for the developed alloy.
所开发的合金获得了极好的切削性能。
FIG. 3 shows the effect of billet reheat temperature and time on machinability.
图3示出了坯料再加热温度和时间对机械加工性能的影响。
The advances in recent researches on MMCs' machinability are reviewed in this paper.
综述了国内外在金属基复合材料切削加工性及机理方面研究的进展情况。
In addition to the tensile properties, machinability was evaluated for the extrusions.
除了拉伸性能，还对挤压件进行机械加工性能的评价。
To improve the homogeneity of manganese sulfide and calcium fluoride, the machinability could be enhanced.
改善硫化锰和氟化钙的分布，将会改善切削加工性。
High machinability, particularly suitable for vehicles with small space and limited assembling conditions.
可加工性强，尤其适合空间较小、安装条件有限的车型。
The biomedical metallic materials have high strength, toughness and machinability, but poor biocompatibility.
医用金属材料具有较好的强度、韧性和优良的加工性能，但是生物相容性差。
An investigation was made on the reasons causing the poor machinability of cylinder block castings for Cummins engines.
针对国产康明斯气缸体铸件超高速加工条件下的加工性差问题进行了调查与分析。
The machinability of crystal material is studied, and the influence of the cutting condition on surface roughness is analyzed.
本文探讨了晶体材料的切削加工性，重点分析了切削条件对表面粗糙度的影响。
The oxide inclusions can be enveloped by sulfide inclusions thus improving machinability of B30 steel through calcium treatment.
通过钙的变性处理，B30钢中的氧化物被硫化物所包裹，从而进一步改善钢的切削加工性。
Cold working dies of superior machinability for general use; for large product quenching or wire electronic discharge machining.
切削性优异的通用冷作模具钢。注意大型加工品的淬火及钢丝电火花加工。
The paper presents the machinability of crystal materials, and emphasizes the influence of cutting conditions on the mirror finish.
探讨晶体材料的切削加工性，重点分析切削条件对实现镜面车削的影响。
The machinability of 718 plastic die steel after different heat treatment was studied and the main influence factors was discussed.
对718塑料模具钢经过不同工艺热处理后的加工性能进行了研究，分析了影响其加工性能的主要因素。
The alloy has enhanced productivity, strength, and machinability and can be used as a direct replacement for lead containing alloy 6262 T-6.
该合金具有提高的生产率、强度和机械加工性能，并且可以被用作含铅合金6262 T - 6的直接替代物。
How to make a comprehensive evaluation of the machinability for processible ceramic materials is put forward according to fuzzy mathematics.
根据模糊数学理论提出一种可加工陶瓷材料可加工性的综合评判方法。
Mechanical characteristics such as strength, or other properties such as corrosion resistance, may be "optional" with respect to machinability.
诸如强度的机械特性或者诸如抗腐蚀性的其它性能，对于机械加工性能可以是“可选的”。
Copper nickel, good machinability and bad crack resistance. Repair welding of sand hole and gray cast iron machined surface subject to no load.
镍铜，易加工，但抗裂性较差。不受力的灰铸铁加工面及砂眼补焊。
The iron-based mixed powder for powder metallurgy can give an iron powder sinter having improved machinability while retaining intact strength.
根据本发明的粉末冶金用铁系混合粉末，可以得到强度不下降，且被削性提高的铁粉烧结体。
In this process, microwave heating is used to make ceramic materials plastifying under a high temperature, so that a good machinability can be achieved.
该方法利用微波加热使陶瓷材料在较高温度下塑性化，从而获得到较好的加工性。
The product is used in building concrete and mortar to obviously improve the machinability and freeze-thaw stability of the building concrete and mortar.
该产品在建筑混凝土和砂浆中使用，能明显提高建筑混凝土、砂浆的可加工性、冻融稳定性。
The advances in the improvement of machinability of cast iron were reviewed from the views of both cast iron itself and the materials of its cutting tools.
从铸铁材料和切削铸铁的刀具材料两个方面，综述了提高铸铁切削性能的研究状况。
It improves the machinability of steels because of brittlement of grain boundaries resulting from the tin segregating on the grain boundaries of the steels.
锡可有效改善钢材的易切削性能，原因是在切削温度范围内富集在晶界的锡使钢材的塑性降低。
Technology of thermohydrogen treatment(THT) for free-cutting of titanium alloy is able to improve the machinability and machining efficiency of titanium alloy.
钛合金易切削热氢处理技术是通过对钛合金进行热氢处理，改善其切削加工性能，提高机加工效率。
Another object of the present invention is to provide a press quench alloy with enhanced extrusion productivity and good mechanical properties and machinability.
本发明的另一个目的是提供具有提高的挤压生产率和良好的机械性能和机械加工性能的模压淬火合金。
One problem was that magnesium (Mg) combined with tin (Sn) during billet reheat, which resulted in low strength, such as tensile strength, and poor machinability.
一个问题是，在坯料再加热过程中镁(Mg)与锡(sn)结合，导致低的强度(例如拉伸强度)，以及差的机械加工性。
One problem was that magnesium (Mg) combined with tin (Sn) during billet reheat, which resulted in low strength, such as tensile strength, and poor machinability.
一个问题是，在坯料再加热过程中镁(Mg)与锡(sn)结合，导致低的强度(例如拉伸强度)，以及差的机械加工性。
应用推荐