The low power design of an 80c51 embedded microprocessor core is presented in this paper.
介绍了一种80c51嵌入式微处理器内核的低功耗设计方法。
Then the methods of low power design are introduced, and the clock gated is used in this design.
此后，介绍了低功耗设计方法，本设计主要采用门控时钟结构来降低功耗。
Analysis and summary about several low power design techniques, and make some Suggestions to improve.
对多种低功耗技术做了分析和总结，并提出了改进意见。
Dynamic voltage scaling (DVS) is an effective methodology for low power design in real-time embedded systems.
动态电压调节是一种有效的运用于实时嵌入式系统中的低功耗技术。
Estimation of least upper bound of IC power dissipation Calculating IC power dissipation is a basis for low power design.
IC电源消耗的估计本文提出并实现了一种计算ic电源消耗最小上界的方法。
In order to solve the problem of low power design of complicated embedded system, a novel dynamic power management policy is presented.
为了解决复杂嵌入式系统的低功耗设计，提出了一种新的动态电源管理策略。
The low power on-chip buses encoding technique is resultful for reducing the power consumption of DSP buses, so it is meaning for DSP low power design.
同时总线编码技术对于降低DSP总线功耗有明显的效果，所以这一技术对DSP低功耗设计有重要的意义。
A low power design in system level using current steering architecture, which can be applied to the system of CMOS mixed signal circuit widely, is presented.
提出了一种系统级电流使能控制结构，可广泛地应用在CMOS数模混合电路中，用于实现系统级的低功耗设计。
The purpose of low power design is to minimize the energy consumption of an embedded system and extend the lifetime of battery without losing its performance.
嵌入式系统低功耗设计的目标是在满足用户对性能需求的前提下，尽可能降低系统的能耗，延长设备的待机时间。
Upon the low power design consideration, a hybrid active-passive loop filter is employed and the signal summing block is removed by using discrete-time differentiation technique.
基于低功耗设计考虑，调制器采用有源-无源混合型环路滤波器，并通过离散时间微分技术移除信号求和模块。
The effort leverages Sporian's expertise in areas including analytical chemistry, molecular biology, optics, low power design, wireless communications and electro-mechanical packaging.
Sporian的专长包括分析化学，分子生物学，光学，低功耗设计，无线通讯和电子机械包装。
Experiments with some of ISCAS85, ISCAS89 and ITC99 benchmark circuits show our analysis method and the proposed parameters are very useful for low power design and energy delivery.
基于ISCAS85、ISCAS89和ITC99电路集的实验表明，本文提出的方法和相关参数对低功耗设计和热量耗散是非常有价值的。
In deep sub - micron technology, the mount of the static power catches up with the dynamic power gradually and the standby power is becoming an important factor in low power design.
进入深亚微米工艺后，静态功耗开始和动态功耗相抗衡，已成为低功耗设计一个不可忽视的因素。
The proposing energy saving and environmentally friendly national policy and low carbon concept deeply rooting among peoples, the VLSI low power design is becoming increasingly important.
同时国家节能减排政策的提出以及低碳环保观念的深入人心，使得超大规模集成电路（VLSI）低功耗设计变得越来越重要。
This design can be used in low-power monochromatic mode for reading, but can also switch to backlit colour mode when needed.
该设计可用于低功耗的单色阅读模式，但需要时，也可切换至背光彩色模式。
MIT's Rahul Sarpeshkar is now applying architectural principles from these ultra-energy-efficient cells to the design of low-power, highly parallel, hybrid analog-digital electronic circuits.
目前，麻省理工学院教授拉胡尔·萨派斯卡正利用这些超能效细胞的构造原则，设计低能耗、高度并行、模数混合的电路。
Additionally, current low power techniques are introduced and classified by the view of design flow and design level.
然后对功耗降低技术的现状，从设计层次和设计流程的角度进行了简要地介绍和归类。
Achieving adequate bandwidth and required PRECISION with a somewhat limited selection of AMPLIFIERs presents significant SYSTEM design challenges in single-supply, low - POWER applications.
对单电源、低功耗应用，在放大器的一些有限的选择面前，要达到适当的带宽和所需的精度，无疑对系统设计提出了重大的挑战。
A design approach for low power CMOS low noise amplifier (LNA) is presented and it is compared with the traditional LNA design method.
针对低功耗电路设计的需求，提出了一种低功耗约束下CMOS低噪声放大器的设计方法，并与传统的设计方法进行了对比。
The AD7927 USES advanced design techniques to achieve very low power dissipation at maximum throughput rates.
AD 7927采用先进的设计技术，可在最高吞吐量下实现极低的功耗。
Low-power oriented design techniques include selecting low-power parts, low operation voltage, managing clock of MCU or making MCU turn into dormancy, managing power supply of circuit and so on.
低功耗设计的关键技术包括选用低功耗的各类器件，低工作电压，对MCU进行时钟管理或休眠，对各部分电路和器件进行电源管理等。
Because of such a low power consumption of our design, the vehicle battery lasts just as long as when the system is not attached.
由于这种低功耗的设计，就像汽车电池持续只要当系统没有连接。
It was considered for low consumed power to design the display and control circuits of this heat meter.
热量表的显示和控制电路，也均考虑了低功耗的要求。
The design and implementation of high speed low power VLSI structure and the analysis and design of high performance on-chip interconnect are two key fields of VLSI design.
高速低功耗VLSI结构的设计实现以及片内高性能互连线的分析设计是VLSI设计的两个关键领域。
This paper proposes a high speed and low power pulse latch design, and integrates it to high speed DSP address generator.
提出了一种高速低功耗脉冲寄存器的设计方法，并将其应用在高速DSP地址生成单元的设计中。
An improved AES algorithm was proposed in this paper, and its low-power ASIC design was discussed.
论文根据一种改进的AES密码算法，提出了其低功耗asic设计与实现的方法。
This paper concentrates on using gated-clock in low-power design of CMOS circuits.
阐述了如何运用门控时钟来进行CMOS电路的低功耗设计。
This paper discusses the design and implementation of a low-power digital clock chip.
本文讨论了一种低功耗时钟芯片的设计与实现。
This paper discusses the design and implementation of a low-power digital clock chip.
本文讨论了一种低功耗时钟芯片的设计与实现。
应用推荐