The information contained in the log includes the details of the command executed and when the job started and stopped.
日志中包含的信息包括所执行命令的详细信息和作业开始和终止的时间。
In this script, you also echo the machine name out to the command log (unique for each machine supplied).
在这个脚本中，您还将计算机名回显到命令日志(对所提供的每台计算机来说是唯一的)。
This executes the remote command almost simultaneously (by running it in the background), and then also pipes the output to individual log files.
这样可以几乎同时地执行这个远程命令(通过在后台运行它)，然后同样通过管道将输出传输到各自的日志文件。
Log on to the CICSB region, using this command in Listing 23.
使用清单23中的命令登录到CICSB区域。
Save the output of the jobs in a file by using the tee command, so that you can keep watching the progress, and the output is saved in a log file.
使用tee命令把作业的输出保存在一个文件中，这样就可以观察进度，还应该把输出保存在日志文件中。
In order to turn to the archive log mode, simply issue the command db2 update db CFG for icmnlsdb using logretain on.
为转换到归档日志模式，只需运行命令db2updatedbcfgfor icmnlsdb using logretain on即可。
Now, instead of going through the entire process of having to run telnet to connect to the remote system, log in with your username and password, run the command(s) on that system, and then log out.
现在，对于整个执行过程，不再需要运行telnet连接到远程系统，使用您的用户名和密码进行登录，在该系统上运行这些命令，然后注销。
Log on to the CICSB region using command in Listing 30.
使用清单30中的命令登录到CICSB区域。
The bash command creates the file log and mails the stdout of the commands found in tellme to you.
bash命令创建文件log并将在tellme文件中找到的命令的stdout发送给您自己。
From the BSD command line, log into mySQL and execute the statement in Listing 5 to create a database.
在BSD命令行中，登录到mySQL并执行清单5的语句来创建数据库。
You can open the console and type the command: member = Member.find 1. You'll see the following appended to your log, as in Listing 3
可以打开一个控制台并输入如下命令：member = Member.find1。
Log out and log in again to make those variables effective, and then issue the clearquest command to launch clearquest on Linux.
退出并重新登陆，使这些变量生效，然后发布clearquest命令到Linux上的clearquest。
The command assistance log file in Listing 1 shows a set of actions necessary to create, save, and start a new business-level application.
清单1中的命令帮助日志文件显示了创建、保存和启动新的业务级应用程序所需的操作集。
For example, to extract the second argument of command 782 in the history log, type the code shown in Listing 4.
例如，要提取历史日志中命令 782的第二个参数，可以输入清单4 中所示的代码。
The SYSLOG_ACTION_READ command is used to block until log messages are available, and then return them in the provided buffer.
SYSLOG_ACTION _ READ用于阻塞操作，直至日志消息到达后才释放该操作，然后将它们返回到所提供的缓冲区。
You can log the information in many ways, for example, on a command-by-command or global basis, and check and report on the progress.
可以通过很多方式对信息进行记录（例如，按命令记录或全盘记录），并检查和报告进度。
When you log in, you are said to be at the command line or command prompt.
当登录时，您将处于命令行或者命令提示符处。
Once the public and secret keys of the users are created, they must log in and run the keylogin command anytime they wish to run the Secure RPC application.
在创建了用户的公钥和机密密钥之后，当这些用户希望运行安全RPC应用程序时，他们必须登录并运行keylogin命令。
As an additional means of indicating when a failure has occurred, you can log in to any of the cluster members and execute the hb_gui command.
另外一种指示何时发生故障的方法是，您可以登录到任何一个集群成员并执行hb_gui命令。
However, before you run this command, you should either log in as a root user or use the sudo command.
但在执行这条命令之前，您应作为root用户登录或使用sudo命令。
As with installing Snort from source code, you will probably need to either log in as the root user to run this command or use the sudo command to install the RPM as the supervisor.
与通过源代码安装Snort类似，您可能需要作为root用户登录来运行此命令，或使用sudo命令来作为超级用户安装rpm。
If you'd prefer to start MongoDB as a daemon process in the background, issue the following command instead: $ sudo mongod --fork --logpath /var/log/mongodb.log --logappend.
如果您想作为后台守护程序启动MongoDB ，发出以下命令： $sudomongod --fork --logpath /var/log/mongodb.log --logappend.
If the configuration of the server does not meet the requirements for this feature, the db2start command will log an error in the db2diag.log file as shown in Figure 4 below.
如果服务器的配置不满足该特性的需求，那么db2start命令将在db2diag . log文件中记录一个错误，如下面的图4所示。
Every command class created from the command pattern would write information to the log. This can include the name of the command class or any parameterized information in the pattern.
每个从command模式中建立的command类都会把信息写进日志，包括command类的名字或者模式中的任何参数信息。
To populate the table, simply import the file using an SQL command, as shown in Listing 3 (it might be necessary to increase the size of the DB2 log file first).
要填充该表，只需使用SQL命令导入文件即可，如清单3中所示(可能需要先增加DB 2日志文件的大小)。
After you log in, switch to the db2inst1 user using the su - db2inst1 command.
在登录之后，使用su-db2inst1命令切换到db2inst1用户。
While still in the shell you opened from within Eclipse that is pointing to your newly started AMI, log into MySQL via the command.
在从eclipse内部打开的、指向新启动的AMI的shell中，通过以下命令登录到mysql。
Log in as the user whom you need to investigate and find the PID of your shell using the ps command.
作为需要检查的用户登录，使用ps命令查明shell的PID。
This user logs into the machine (if using the command line to start the product process) or the log On user setting in the services panel (if the product processes have started using the services).
该用户登录到计算机(如果使用命令行启动产品进程)或服务面板中的Log OnUser设置(如果使用服务启动产品进程)。
This user logs into the machine (if using the command line to start the product process) or the log On user setting in the services panel (if the product processes have started using the services).
该用户登录到计算机(如果使用命令行启动产品进程)或服务面板中的Log OnUser设置(如果使用服务启动产品进程)。
应用推荐