Interrupting no load transformer is the most serious case in vacuum circuit breaker switching overvoltage.
切除空载变压器是真空断路器操作过电压问题最严重的情况。
Used for points and load current, closed loop current, no-load transformer and cable charging electric current.
用于分合负荷电流、闭环电流、空载变压器和电缆充电电流。
Used for points and load current, closed loop current, no-load transformer and cable charging electric current, close short circuit current.
用于分合负荷电流，闭环电流，空载变压器和电缆充电电流，关合短路电流。
Because according to the current load level a city has generally thousands of distribution transformer and box transformer.
因为按目前的负荷水平来说，一般的城市都有几千台配电变压器和箱式变压器。
The variable off-time regulates how often the transformer charges and delivers power to the load.
可变的间隙时间调节转换器多久充电和传递能量到负载。
Transformers: it is used by water-cooled welding transformer with single-phase 200kva vacuum epoxy encapsulation. It accounts for more than 50% load.
变压器：采用单相200kva真空环氧封装水冷式焊接变压器，占载率50%以上。
In the palper, with resonance between the secondary coil of suspension transforMer and capacitance load the active ESS has been developed.
本文利用高压支承变压器高频载波下付边电感与负载电容的谐振特性，设计并研制了有源谐振的ESS。
Furthermore, as the load on a large substation grows, transformer capacity has to BE added.
此外，随着大型变电站的负荷增长，变压器的容量也必须增加。
However, at the distribution level, 'tie switches are used to switch feeders or feeder sections between transformers in the same station, or to adjacent substations for substation transformer load.
然而在配电等级，联络开关用来开合同一变电站中不同变压器上的馈线或馈线段，或切换到邻近变电站以进行变电站变压器的负荷管理。
Aiming at reducing the load loss of distribution transformer, new idea of developing energy-saving distribution transformer is brought out.
围绕降低配电变压器(简称配变)负载损耗的课题，提出研制新型节能型配变的新思路。
The cooling method of nature oil circulation is not only widely used in small-middle type power transformer, but also used in large type power transformer with low load and low ambient temperature.
自然油循环的冷却方式不仅广泛应用于电力网中的中小型电力变压器，也会在在大型电力变压器低负荷和低环境温度时应用。
Transformer substation including each kind of equipment: transformer, circuit breaker, load switch, generatrix, current transformer, voltage transformer and so on.
变电站包括各类设备：变压器、断路器、负荷开关、母线、电流互感器、电压互感器等。
Transformer control over the class load order would improve the generality of dynamic transformation but would not solve the problem.
变压器控制班级负荷秩序会改善的一般性的动态转化，但不会解决这个问题。
The design method of the high voltage and the fast response time pulse transformer used in the condition of low load impedance was introduced.
介绍了工作于低阻抗负载下的高压大电流快响应脉冲变压器的一种设计方法。
Finally, the effecting parameters are investigated such as system resistance, parallel or series of transformers, and the load of connected transformer.
分析了系统等效电阻、并联与串联以及运行变压器负载对和应涌流的影响。
Through technical analysis and calculation, the critical coefficient and optimal load rate of transformer are determined for the reasonable selection of transformer capacity.
通过技术分析和计算，确定变压器临界系数以及变压器的最佳负载率，合理选择变压器的容量。
The typical load curve which is selected for evaluating the overload ability of traction transformer must be reasonable, it should reflect accurately the operation status of traction transformer.
在评价牵引变压器的过负荷能力时，所选择的典型负荷曲线必须合理，使之能够正确反映线路的牵引变压器运行状况。
This paper analyzes the cooperation problem in indication between voltage - regulating transformer on load and the corresponding secondary equipment, puts forward the solution and uses it in practice.
分析了有载调压变压器及与之相配套的二次设备在档位显示方面的配合问题，提出解决方法，并应用到实际工作中。
Distribution transformer adds power factor correction capacitor in the secondary side to collect compensate, so as to advance power factor and augment the load capacity of transformer.
配电变压器二次侧增设移相电容器进行集中补偿，提高了功率因数，增大了变压器的负载能力。
The parameters, structure, design difficulty, solution and test data of 900MVA on-load-tap-changing auto transformer are introduced.
介绍了900MVA自耦有载调压变压器的基本参数、基本结构、设计难点、解决方案及试验结果。
On the basis of the analysis of static economic load rate, a dynamic optimal economic load rate of transformer is provided, which is the basis for selection of trans-former capacity.
并在变压器静态经济负载率分析的基础上提出变压器动态最佳负载率，以此作为变压器经济容量的选择依据。
So the method of making the typical load curve of traction transformer is great significant.
因此，通过研究牵引负荷得到建立牵引变压器典型负荷曲线的方法具有重要的意义。
The device consists of NAJS automatic flash speed multi-position transformer calibration device, the current load box, control cabinet, current transformer test stand and other components.
该装置由NAJS全自动极速多台位互感器检定装置、电流负载箱、控制柜、电流互感器专用测试台等几个部分组成。
If regulating equipment is needed, it may be desirable to provide it in the transformer by using load tap changer (LTC) equipment.
若需要调节设备，可要求在变压器中采用有载分接开关(LTC)设备。
It has evident effect on low power factor working of motor, decreasing line loss and improving load ability of transformer.
实行电动机无功就地补偿，对改变电动机低功率因数运行、减少线路损耗、提高变压器带载能力，有明显效果。
Its software is designed to calculate the running parameters of the AC drive system, including transformer, quadrant rectifier, DC circuit, inverter, AC motor and train load.
系统采用软件方式实时计算交流传动系统的运行参数，包括变压器、四象限整流器、直流中间回路、逆变器、电机及负载。
The load supplying capability (LSC) of urban distribution network is the maximum load which can be supplied by the network without any branch (line and transformer included) exceeding its capacity.
城市电网的最大供电能力是指在城市电网任意支路(线路、变压器)无过负荷条件下所能供应的最大负荷。
The load supplying capability (LSC) of urban distribution network is the maximum load which can be supplied by the network without any branch (line and transformer included) exceeding its capacity.
城市电网的最大供电能力是指在城市电网任意支路(线路、变压器)无过负荷条件下所能供应的最大负荷。
应用推荐