These conclusions have some guidance significances to the practical load identification problems.
这些结论对实际的荷载识别问题有一定的指导意义。
In this paper, a time domain method for dynamic load identification by indirect measurement is presented.
本文提出一种识别动态力的非直接量测时域方法。
In this thesis, the dynamic load identification of guyed mast method in time domain based on modal analysis is analyzed.
要解决这个问题，必须建立作用在桅杆结构上的动力风荷载的识别方法。
In this paper, load identification is studied in the time domain by combining the coupling method and the precise time integration method.
该文通过耦合方法与精细时程积分法的结合，对载荷辨识问题进行时域分析和推导。
The dynamic load identification is formulated by time finite element model with shape function of generalized orthogonal polynomial in this paper.
本文利用广义正交多项式作为时间有限元的形函数，推导了基于时间有限元的动载荷识别模型。
In order to identify the unknown concentrated dynamic force, the theory of load identification of the rotating beam in time domain is established.
为了辨识未知集中力，建立了时域下旋转连续梁的动载荷识别理论。
Suggested in this paper is method for random vibration load identification, together with the algorithm used for physical parameter identification.
本文给出一个随机振动载荷的识别方法和系统物理参数的识别算法。
In this paper multi - input and multi - output optimized inverse system load estimation method is applied to study multi - load identification by experiment.
本文应用多输入-多输出优化逆系统方法进行了多载荷识别试验研究。
A combined iteration method for load identification is proposed to analyze the nonlinear dynamical system by joining finite element method with active control method.
针对一类非线性系统提出了一种新的载荷识别方法，组合迭代法。
Through the thorough analysis and demonstration, it is pointed out that the use of time domain parameter identification and load identification is necessary and feasible.
经全面分析论证指出，采用时域识别方法，对其进行参数识别和载荷识别是必要的和可行的。
Load balancing is a desired target for resource allocation in high performance cluster system, and to get a well-balanced load is determined directly by load identification.
负载均衡一直是高性能集群系统中资源分配追求的一个主要目标，能否有效地进行负截识别则直接关系到负载均衡的最终实现。
The numerical examples explain that the method of modal parameter identification and load identification in this thesis both are reasonable, applicable for factual engineering.
文中的数值算例分别验证了模态参数辨识及动态载荷识别方法的合理性、适用性及计算程序编制的正确性。
The technique of dynamic load identification can be used to identify unknown dynamic load in the case of knowing matrix of coefficient and dynamic response being measured already.
在已知系统系数矩阵以及动响应的情况下，利用动载荷识别技术可以探知未知的动载荷。
The second chapter introduces the basic principle and the correlation knowledge of moving load identification, including mode shape orthogonality, mode superposition principle and so on.
第二章介绍了移动荷载识别的基本原理和相关知识，包括振型的正交性，模态叠加原理等。
A new analysis method has been provided for dynamic load identification of a discrete system intime domain, it solves the inverse problem by means of Duhamel integral in forward analysis.
本文给出了离散系统动态载荷识别的一种新的时域分析方法，它是用正分析的手段来求解反问题的。
The highly precise direct integration scheme is used for solving modal dynamic differential equation of the structure nd a dynamic load identification method by the modal responses is proposed.
采用无条件稳定的精细逐步积分法求解结构的模态动力学微分方程，构造了通过结构的模态响应反求荷载列阵的迭代算法。
The results of two practical examples prove its validity and accuracy when applied it in parameter identification of composite load model.
实际算例的结果证实了该算法对综合负荷模型参数辨识的有效性和准确性。
The simplified identification strategy for parameters of composite load model constituted by ZIP load model in parallel with asynchronous motor is researched.
研究了ZIP负荷模型与感应电动机相并联的综合负荷模型参数的简化辨识策略。
At present, proximity high frequency RFID (Radio frequency Identification) system based on inductive coupling load modulated technology is used worldwide.
目前，国内外广泛应用的RFID系统是基于感应耦合负载调制技术的近距离高频读写系统。
It is well-known that identification of load distributions has always been a worthy problem in science and engineering which catches researchers' much attention.
众所周知，载荷辨识问题一直是工程及科学上极具研究价值的问题之一，历来受到众多研究学者的关注。
Power system load forecasting using stochastic system state model identification technique is proposed.
本文将随机系统状态模型辨识技术用于电力系统负荷预报。
Aiming at characteristics of unpredictability the load torque used in ac motor servo system, a method of load torque adaptive identification based on state observer is presented.
针对交流电机伺服系统中负载转矩不可预测性的特点，提出一种基于状态观测器的负载转矩自适应辨识方法。
The identification of multi-point arbitrary correlated stationary random load is presented in the paper in the light of the method of matrices spectrum decomposition.
根据矩阵谱分解的思想，提出多点任意相关的随机载荷识别方法。
An identification method based on random load fluctuation has been proposed in this paper and applied in Beijing Shi.
该文提出一种基于随机负荷波动的水轮机模型辨识方法，并应用于北京十三陵抽蓄电站。
Research results, as comprehensive consideration distribution network load model parameter identification provides guidance.
研究结果，为进一步开展考虑配电网络综合负荷模型参数辨识提供指导依据。
The protocol sends identification information periodically to build cluster structure in sensor network. The protocol can reduce the load of the communication network.
该协议是通过周期性地发送识别信息构建传感器网络的簇结构，有效的降低通信网络的负载。
Results:Substituting machine identification for manual identification upgraded the veracity and efficiency of counting devices, and decreased the load of workers.
结果：以机器识别代替人工识别，很大程度地提高医院设备清点准确率和效率，降低人员劳动强度；
The two main problem of measurement-based load modeling is model structure based on measured load characteristics data and the model parameters identification.
总体测辨法负荷建模的两个主要问题是基于实测负荷特性数据的模型结构和模型参数的辨识。
In order to implement an energy-saving method which keeps iron loss equal to copper loss using variable-voltage in light load, induction motor parameter identification at any moment is a key problem.
对于轻载调压使铜损等于铁损的这一节能方法而言，在线辨识出电机的参数是一个关键点。
In order to implement an energy-saving method which keeps iron loss equal to copper loss using variable-voltage in light load, induction motor parameter identification at any moment is a key problem.
对于轻载调压使铜损等于铁损的这一节能方法而言，在线辨识出电机的参数是一个关键点。
应用推荐